 Your new post is loading...
|
Scooped by
MaterialsReview
August 25, 2015 3:05 AM
|
At first glance BMW’s yet-to-launch luxury flagship is about as relevant to the average CarsGuide reader as haute couture.
Yet just as bespoke fashion finds its way into mainstream outlets, so will the technology infused in the big limousine filter down to more affordable models.
|
Scooped by
MaterialsReview
August 24, 2015 2:28 PM
|
ULYANOVSK, RUSSIA - A pilot production plant for wood-plastic composites in Ulyanovsk, Russian will make pellets incorporating hard plastic, designed for furniture part production and other composite wood products. The higher strength, elasticity and moisture resistance, UV-stabilized and decay-resistant: packaging, construction and furniture parts, along with elements of construction formwork
|
Scooped by
MaterialsReview
August 20, 2015 4:00 AM
|
Aircraft OEMs are striving to make their products more fuel-efficient, with improved engines and every-increasing use of composite materials, including in interiors. Composites have long had a role in cabin finishes, because of their high strength to weight and thus contribution to higher aircraft fuel efficiency. As we have reported in CW in the past (e.g., Chris Red’s market outlook article here: http://www.compositesworld.com/articles/composites-in-aircraft-interiors-2012-2022), interior composite components can include seats, floor boards, bulkheads and cabin dividers, lavatories, galleys, wall and ceiling panels and stowage bins. While obviously not as structural as aircraft airframes, nevertheless composite materials for interiors must have strength and meet very stringent flame, smoke and toxicity (FST), heat release, burn rate/flame spread, crash safety and other performance mandates published in the US Federal Aviation Administration’s Federal Aviation Regulations (FAR), Part 25.
|
Scooped by
MaterialsReview
August 19, 2015 10:42 AM
|
Pultrusion Market worth 2,045.2 M USD by 2020
Tuesday 18 August 2015, Amsterdam
The report "Pultrusion Market by type (Glass Fiber, Carbon Fiber and others), by Resin Type (Polyester, Vinyl Ester, Polyurethane and Others) by Application (Industrial, Housing, Civil Engineering, Consumers and others) and by Region - Global Trends and Forecasts to 2020", The pultrusion end market in terms of value is expected to reach around USD 2,045.2 Million by 2020, at a CAGR of 4.8% between 2015 and 2020.
Pultrusion is a process of manufacturing structural composites parts using polymer matrix and fibers. Properties of products manufactured through pultrusion are good strength, good chemical resistance, non-magnetic, low maintenance and very low thermal expansion.
The pultruded parts have applications in construction industry where different pultruded parts are used in form of gratings, rebars and customized profiles. Pultruded products provide manufacturers and designers with the benefits of high strength-to-weight ratios, corrosion resistance, heat resistance, dielectric properties, and dimensional stability. FRP pultrusions are cost effective and versatile alternative to traditional materials, such as steel, aluminum and timber. FRP pultrusions weigh 75% less than steel and are non-corrosive. FRP rebar has also been applied to various aspects of chemical anti-corrosion, and it replaces carbon steel, stainless steel, wood, and non-ferrous metals. Moreover, pultruded structural components used in the cooling towers produce an engineered framework of high quality, reliability and safety.
Industrial applications are expected to drive the pultrusion market in next five years due to increase in demand of pultruded parts in cooling towers, offshore oil drilling projects and civil engineering. . Currently, the global pultrusion market is dominated by various market players, such as Exel Composites (Finland), Strongwell Corp. (U.S.), Bedford Plastics (U.S.), Creative Pultrusion (U.S.) and Glasfroms Inc (U.S).
The global pultrusion market is expected to witness substantial growth in the near future. There is a growing adoption of pultruded parts in various sectors, such as industrial, housing, construction, consumer, transportation, aerospace & defense and electrical insulation.
The research study is aimed at identifying emerging trends and opportunities in the global pultrusion market along with detailed classifications, in terms of revenue and volume. It provides comprehensive competitive landscape and identifies the key players with respect to market size and market share. The research study also includes a detailed segmentation of the global pultrusion market, on the basis of application, fiber type, resin type and geography.
Apart from the market segmentation, this report also makes use of the Porter’s Five Forces Analysis, which provides an in-depth analysis of the market providing a detailed process flow diagram and market dynamics, such as drivers, restraints, and opportunities in the global pultrusion market.
|
Scooped by
MaterialsReview
August 19, 2015 10:26 AM
|
Looks like BMW is transferring its carbon fibre knowledge from four wheels to two. according to Motorcycle news, the German automaker has just patented designs for two carbon fibre motorbike frames, along with plans for assembly.
While BMW’s carbon-fibre beam frame will look much like a conventional aluminium chassis, according to MCN the patents reveal that internally its construction is quite different.
The frames creation starts with eight lengths of ‘pultruded’ carbon-fibre. The pultruded parts are only partially cured, so they remain malleable enough to be formed around a buck where they’re added to pre-made metal or carbon-fibre parts including a headstock and a pair of cross braces – one below the swingarm pivot, the other forming a top mount for the rear shock. The four longer pultruded sections form the main frame rails while two shorter ones run from the headstock back to where the engine’s cylinder head will be, becoming front engine mounts.
New Report on Global Glass Fibre Reinforced Plastic (GFRP) Composites Market 2015 Industry Trend and Forecast 2020 added to Orbisresearch.com store.
Via Lisa King
|
Scooped by
MaterialsReview
August 13, 2015 9:28 AM
|
Aktuelle Nachrichten, Marktreporte und Fachartikel aus der Kunststoff-Industrie
|
Scooped by
MaterialsReview
August 12, 2015 2:23 AM
|
Renault and Daimler look to future material use Plastics News They stressed the TPC pan's ability to withstand cataphoresis (e‑coating) paint-drying temperatures of typically 200°C for 30 minutes, improved NVH (noise, vibration, harshness) through...
|
Scooped by
MaterialsReview
August 7, 2015 10:40 AM
|
|
Scooped by
MaterialsReview
August 5, 2015 8:08 AM
|
One of the largest composites manufacturing robots created in America will help NASA build the biggest, lightweight composite parts ever made for space vehicles.
|
Scooped by
MaterialsReview
July 27, 2015 5:35 AM
|
Press Release issued Jul 24, 2015: About CFRP
Quantum Composites has introduced its first hybrid carbon fiber/glass fiber material, suitable for compression molding in automotive, heavy truck, medical, sporting goods and industrial applications.
Via PFibre
|
Scooped by
MaterialsReview
July 14, 2015 2:58 AM
|
Posted 4/1/15 Carbon fiber composites are being widely adopted in high-end vehicles, however they are falling behind other lightweight materials in making their way to mass volume automotive production.
|
|
Scooped by
MaterialsReview
August 24, 2015 2:33 PM
|
NASA has one of the largest composites manufacturing robots ever created in America, and it will be used to build the biggest composite parts ever made
|
Scooped by
MaterialsReview
August 20, 2015 8:28 AM
|
Trials at the Hohenstein Institute have shown how biotechnology can be used to create new ways of recycling carbon fibres. Researchers in the team led by Christin Glöckner are using microbiological systems to bring about the controlled breakdown of the synthetic matrix.
Even though manufacturing with composites can be very expensive, every year around 3000 tonnes of carbon fibre waste is generated in Europe alone, an enormous waste of such a valuable raw material as carbon fibres. The institute say that the recycling process currently being used to predominantly recycle carbon fibre is extremely energy-intensive and only short-staple carbon fibres can be recovered. Furthermore, the chemical and mechanical recycling methods that are known about today are very labour-intensive.
|
Scooped by
MaterialsReview
August 20, 2015 3:11 AM
|
Airtech Advanced Materials (Huntington Beach, CA, US) is featuring several products infusion-based molding processes in its booth.
Premium Multi-Valve 408 has a solid body design that combines the male quick-disconnect and thru-bag connector. It eliminates threaded connections and potential leak paths. Stainless steel construction ensures corrosion resistance and long life. High-temperature O-ring and platinum cured silicone gasket give a long service. It is interface-compatible with Parker Snap-Tite 0.25-inch style quick disconnects. The valve mechanism and O-ring seals can be replaced to extend life.
|
Scooped by
MaterialsReview
August 19, 2015 10:40 AM
|
The technique is based around the company’s proprietary solution called Node, which is a 3D-printed aluminium joint that connects carbon fibre rods to make up the car’s chassis. Divergent say the assembly can be done in minutes and will cut down the amount of 3D printing required to create the chassis, in addition to reducing materials and energy, the weight of the node chassis would be up to 90% lighter than traditional cards, which means you get increased fuel economy whilst still retaining strength and durability.
|
Scooped by
MaterialsReview
August 19, 2015 10:21 AM
|
The wing has the same span of the company’s current A350–900 but 90% of the parts have been modified for the A350–1000 and the trailing edge has been extended to resize the wing for additional payloads and increased range.
At 32 metres long by six metres wide, the A350 XWB wing is the largest single part made from carbon fibre composite material in use in civil aviation today. They are designed and developed at Airbus’ facility in Filton, near Bristol, where a number of other systems are designed and tested including fuel systems and landing gear.
|
Scooped by
MaterialsReview
August 13, 2015 11:33 AM
|
Composites Europe will take place from 22-24 September in Stuttgart, where it will exhibit a whole range of fibre-reinforced plastics, among which are numerous innovations in the applications of automobile construction, air and space travel.
|
Scooped by
MaterialsReview
August 13, 2015 8:38 AM
|
|
Scooped by
MaterialsReview
August 11, 2015 10:58 AM
|
A test drive of the Alfa Romeo 4C reveals what a difference carbon fiber can make in a car.
|
Scooped by
MaterialsReview
August 6, 2015 2:57 AM
|
in 2013 mclaren rolled out the 2014 mclaren p1 its first full-fledged supercar since the 1993 nbsp ...
|
Scooped by
MaterialsReview
August 3, 2015 3:13 AM
|
|
Scooped by
MaterialsReview
July 21, 2015 2:34 AM
|
Ford has laid claim as the first major automaker to mass produce carbon fiber wheels as standard equipment for a production vehicle.
|
Scooped by
MaterialsReview
July 17, 2015 5:50 AM
|
BMW proved with its i3 and i8 that carbon fiber in the form of carbon fiber-reinforced plastic (CFRP) could be used effectively in the mass production of vehicles.
|
Carbon core: Adopted from the i Series vehicles, the carbon-fibre reinforced plastic has helped trim 120kg from the 7 Series. Arens says bonding car components is better than welding because the weld softens the metal around the joint.