 Your new post is loading...
|
Scooped by
MaterialsReview
October 7, 2015 10:20 AM
|
Aerospace composites specialist FACC (Ried im Innkreis, Austria) has developed its latest development in the winglet sector, a new technology it calls Active Morphing Winglets.
This new, actively controlled winglet from FACC adapts automatically to respective flight conditions, thereby reducing fuel consumption even further and increasing flight safety. The innovation features a control flap that adjusts itself in real time to suit the current conditions. FACC says this also ensures optimal aerodynamics for the fuel-intensive take-off and landing procedures, and helps reduce noise and pollution emissions.
In cruising flight, the aircraft is further stabilized in crosswinds and gusts. A freely warping (morphing) gap covering covers the gap produced when the control flap emerges and ensures aerodynamically optimized geometries in every setting. This variability of the wing geometry compensates for the additional load caused by winglets in the central and outer wing structure, making structural reinforcement of the wing unnecessary when winglets are added. Control unit, sensors, and actuators are accommodated in the smallest of spaces. FACC says integration of the gap covering in an airworthy design and implementation of a maximum oscillation rate of 60H without stalling represent a milestone in aeronautical design.
The benefits of this innovation also include a substantial reduction in various environmental effects. The new generation of Active Morphing Winglets saves around 2.5% more fuel than the rigid solutions. Noise emissions are reduced by about 2 decibels, thereby ensuring lower noise levels in the vicinity of airports. The shorter, active winglets provide an additional advantage over conventional, horizontal wing extensions in terms of maneuverability at the airport. Winglets extend the wing surface vertically, thereby saving space, increasing efficiency and ultimately optimizing airport utilization. The Active Morphing Winglet prototype has already been subjected to intensive wind-tunnel tests. These confirmed the improved performance of the new winglets in realistic flight conditions. Test results are currently being evaluated by aircraft manufacturer Airbus.
"These actively controlled wingtips have the potential to further reduce civil aircraft fuel consumption by about 2.5% compared with conventional winglets," says Walter Stephan, chairman of FACC AG, pointing out the benefits of this invention. "However, people living near airports will also benefit from the innovation: Thanks to improved aerodynamics, the novel winglets ensure lower noise levels during take-off and landing. A technology to make flying more efficient and greener in future."
FACC worked to develop the winglets with Airbus Group Innovations, the Dutch National Aerospace Laboratory (NLR), Institute for Manufacturing Technology and Advanced Materials (Fraunhofer IFAM) and the Spanish research center for composite materials (FIDAMC).
|
Scooped by
MaterialsReview
October 7, 2015 2:55 AM
|
This company is in full charge of the technical service and sales business in the great China area. It has been reported that all the products will all be imported from Igus German headquarter, while the company has established a 6,300 square meters of bonded warehouse in Shanghai Waigaoqiao bonded zone with all the major products in stock.
The picture shown above is the lightest linear guide rail - Igus drylin W carbon fiber guide rail that reduced over 40% weight in comparison with the traditional metal guide rail that is reported to have a great market potential. No matter in aircraft, or auto industry, there are hot spots regarding light weight movement. The designing engineers more and more depend on the carbon fiber reinforced materials. In order to satisfy the needs in this aspect, Igus has successfully developed drylin W carbon fiber guide rail.
Extremely light, high stiffness, non-magnetic etc, are the major advantages of the carbon fiber reinforced plastics (CFRP) in comparison with the metal materials. In certain high demanding key applications, such as aviation / aerospace and medical technology, Igus can provide 2,000 mm route carbon fiber linear guide rail. Not only are the supporting materials made of carbon fiber materials, but also the entire rail are made of carbon fiber materials as well. In comparison with the aluminum solution, the rail and slider weight has been reduced by as high as 40%, while this number can increase to over 60% in the case of steel material.
Reduce weight can save cost as well, especially in the aviation / aerospace industry and automobile industry. In other industries, as far as there is a need for high dynamic movement, the lightweight materials can also play an important role. Take robot industry as an example, there are more and more applications that make use of carbon fiber composite materials components lightweight advantages. IGUS has been involving in the carbon fiber axis production for over ten years. They have a lot of rich experience through many tests, detections, and production.
Igus project supervisor Stefan Niermann said that it has been proven that iglidur L250 combination application has the more optimized abrasion loss and abrasion coefficient. Stefan Niermann is in charge of the linear drive technology. According to him, the test result shows that this material is also suitable for the rail making. Same as other igus® products, this new product has been widely tested to obtain reliable data for the abrasion coefficient and service life.
Iglidur L250 is a kind of completely non-metal synchronized axis, the high section area carbon guide rail and attach grapple without re-processing. In addition, the high section area guide rail is a completely no metal gear axis with the base length of 1,000 mm. This system is consist of carbon fiber axis, plastic gear, and xiros plastic ball bearing. Therefore, this system can be used in X-ray medical equipment. Except the carbon fiber materials characteristics, this system is the same with other igus products, it is lubricant free in maintenance.
|
Scooped by
MaterialsReview
October 6, 2015 8:58 AM
|
Lamborghini’s first ever car to feature carbon fibre parts was the Countach Quattrovalvole in 1985. In this video eGarage shows how 30 years on, Lamborghini is still busy making everything lighter and stronger with advanced composites.
The company’s Advanced Composites Structures Laboratory based in Seattle is the company’s front line in the development of carbon fibre and composite structures for future Lamborghini models.
Using its forged composite technology in partnership with Boeing and Calloway allows them to manufacture in volume and fix damaged composites on-location. Forged composite is composed of bundles of microscopic carbon fibres bound together in resin. Instead of traditional woven carbon fibre sheets impregnated with resin it uses a malleable paste of carbon and resin which makes it incredibly strong.
In this video you will see inside the evolution of advanced composites materials at Lambo from the Countach Evoluzione to the Sesto Elemento.
https://www.youtube.com/watch?v=SMibBlZCSKM
|
Scooped by
MaterialsReview
October 2, 2015 5:42 AM
|
Lightweight construction represents one of the greatest opportunities and prospective growth areas for the fibre composites industry. Demand in Europe is on the rise, and the sector is looking to the future with optimism – especially in Germany, a hub of innovation with above-average increases in the production of lightweight materials. The positive mood was reflected as well at the 10th COMPOSITES EUROPE, where the anniversary event from 22 to 24 September 2015 set new records all around – in terms of exhibitors, visitors and exhibition space.
The trade fair for fibre-reinforced plastics has been on an uninterrupted growth path ever since the event first took place. COMPOSITES EUROPE 2006 kicked things off with 168 exhibitors. When the event cycled back to Stuttgart this year for the tenth anniversary, 470 companies (prior Stuttgart event in 2013: 405) from 29 nations exhibited and filled three exhibition halls for the first time. With 10,087 visitors in attendance (2013: 9,171), COMPOSITES EUROPE set yet another record.
Drawn to the Exhibition Centre in Stuttgart above all were lightweight construction experts from the automotive sector, aerospace, mechanical engineering, the sports and leisure industry, wind power, and the construction sector.
LWhat’s more, COMPOSITES EUROPE has long been known as an important gathering place for the international industry: nearly half of all trade fair visitors (45%) came from outside Germany, with one in eight (13%) hailing from overseas. “Over the last ten years, COMPOSITES EUROPE has built an inclusive cross-sectoral network, which today benefits the entire composites industry. In this function, it is one of the most important international relationship brokers today”, says Hans-Joachim Erbel, CEO of Reed Exhibitions Deutschland GmbH, the organiser of COMPOSITES EUROPE.
Composites market continues to grow in 2015 Glass-fibre reinforced plastics (GFRP) make up the composites industry’s largest group of materials by far, with a share of over 95% of the total volume. GFRP production is on track to grow by 2.5% in 2015, reaching the highest level in eight years with an estimated 1.069 million tonnes. That’s the finding of the current market report issued by the German reinforced-plastics industry association AVK, which was presented in Stuttgart. Thermoplastic materials such as GMT and LFT are posting above-average growth rates. In addition to developing new products, researchers are focussed on multi-material composites systems in structural components. “The development of multi-material systems beyond individual materials groups remains one of the biggest challenges for the composites industry”, says Dr. Elmar Witten, the managing director of AVK. Thorsten Kühmann, the managing director for plastics and rubber machinery at the VDMA’s Forum Composite Technology, underscores that assessment: “Lightweight and smart – modern components for user industries must be both. COMPOSITES EUROPE is very well positioned in this area today.
Germany still top growth market The highest growth rates are being posted by the composites industry in Germany: the largest market for fibre-reinforced plastics in Europe is set to grow by 6% in 2015, followed by the Eastern European countries (4%) and UK/Ireland (3%). The main purchasers continue to be the transport and construction sectors, followed by the electrical/electronics industry, and the sports and leisure industry. Trade fair visitors are also confirming the excellent economic prospects enjoyed by fibre-reinforced composites: 72% of respondents expect their respective sectors to experience upward economic momentum in the next three to four years. Only 18% forecast their industry to stagnate.
COMPOSITES EUROPE puts spotlight on lightweight construction A representative survey of trade fair visitors has shown that lightweight construction represents one of the biggest challenge areas for the industries that use fibre-reinforced plastics. About half consider lightweight construction a priority when it comes to developing innovative components, followed by the reduction of materials costs, automation and shorter process cycles.
Supplementing the exhibition area at COMPOSITES EUROPE was an extensive congress and lecture programme that provided an outlook on the future of lightweight construction. Two new events premiered at COMPOSITES EUROPE: the 1st International Composites Congress (which succeeded the former AVK Conference) and the bio!CAR Conference. “COMPOSITES EUROPE is an indispensable market staple. The response has been excellent again this year. We consider COMPOSITES EUROPE our trade fair partner – now and in future.”, says Dr. Elmar Witten, the management spokesman of Composites Germany.
Parallel event HYBRID Expo on the ascent The significance of multi-material composites – metal-plastic hybrids, in particular – in the automotive engineering and electronics sectors was also on display at the parallel event HYBRID Expo, which was staged for the second time in Stuttgart. A total of 70 international exhibitors, including many major industry players from mechanical engineering, toolmaking and R&D as well as numerous complete-solutions providers, presented the entire process chain for the large-scale manufacturing of hybrid components. A special focus at the trade fair was on process integration and acceleration during the production of metal-plastic composites. A total of 2,962 visitors attended this year’s HYBRID Expo.
COMPOSITES EUROPE 2016 back in Düsseldorf The next COMPOSITES EUROPE will cycle back to Düsseldorf and take place from 29 November to 1 December 2016 – this time again as a parallel event to the ALUMINIUM World Trade Fair. A combined total of approximately 1,500 lightweight construction exhibitors is expected for both trade fairs. The VDMA’s Thorsten Kühmann emphasises that the annual rotation of the location is appealing to the lightweight construction sector: “The targeted industry focus in Stuttgart and the cross-material event tie-in with ALUMINIUM in Düsseldorf are ideal for us and for our industry.
Note: The visitor, exhibitor and floor space figures of this trade fair are calculated and certified according to the uniform definitions published by FKM – German Society for Voluntary Control of Fair and Exhibition Statistics.
Partner and exhibitor statements: “COMPOSITES EUROPE is an indispensable market staple. The response has been excellent again this year. We consider COMPOSITES EUROPE our trade fair partner – now and in future.” Dr. Elmar Witten, Managing Director, AVK / Management Spokesman, Composites Germany “The rising demand for light and smart materials are driving lightweight construction into the new dimension of mass production. COMPOSITES EUROPE is the innovation hub for the composites industry – right at the heart of the most important market for lightweight construction materials in Europe.” Prof. Roberto Frassine, President, EuCIA “Lightweight and smart – modern components for user industries must be both. COMPOSITES EUROPE is very well positioned in this area today.It places the focus on our customers and offers exactly those lightweight construction solutions the industry is looking for. The targeted industry focus in Stuttgart and the cross-material event tie-in with ALUMINIUM in Düsseldorf are ideal for us and for our industry.” Thorsten Kühmann, Managing Director, Plastics and Rubber Machinery, Forum Composite Technology, VDMA “COMPOSITES EUROPE is a key trade fair for mechanical and plant engineering to present the latest developments. Besides established processes in duromer production, which are getting more and more suitable for large-scale manufacturing, we see great momentum and matching growth rates in the area of thermoplastic composites systems. In this context, process combinations for hybrid lightweight construction are gaining steadily in importance. On the international level, it’s becoming apparent that investment needs are increasing, especially on the Chinese market.” Dr. Walter Begemann, Project Director, VDMA Forum Composite Technology “Over the last ten years, COMPOSITES EUROPE has built an inclusive cross-sectoral network, which today benefits the entire composites industry. In this function, it is one of the most important international relationship brokers today.” Hans-Joachim Erbel, CEO, Reed Exhibitions Deutschland GmbH, Organiser of COMPOSITES EUROPE “We are highly satisfied again. It’s very important that we meet global players at COMPOSITES EUROPE. What we really enjoy is the opportunity here to talk with key people about the composites market. Given the internationalisation of the composites market, it’s really wonderful that we have a trade fair that alternates locations between Düsseldorf and Stuttgart, bringing key players to the venue. That’s why we’re still happy to be at COMPOSITES EUROPE. Besides the European markets, we currently see increasing potential in Asia and the US. Impulses for developments in the areas thermoplastics and thermosets are still – and increasingly – being generated in Germany. From our fibre composites competency centre in Munich, we can meet the needs of every lightweight construction trend.” Stefan Fenske, Product & Technology Management, KraussMaffei Technologies GmbH “We’re very pleased with COMPOSITES EUROPE. We’ve made several international contacts from everywhere, i.e. from Europe to the US. That’s why the trade fair was a complete success for us.” Gert Laarakker, Domestic & Int’l Sales, J.H. VOM BAUR SOHN GMBH & Co. KG “A big success. Visitor quality has increased. With three halls, the trade fair is very well positioned this year. The quality of COMPOSITES EUROPE is improving with each passing year.” Michael Stahl, Director Corporate Marcom & Public Affairs, Hexion GmbH “For us as a developer and manufacturer of composite materials, COMPOSITES EUROPE provides an ideal platform for welcoming our customers to discussions at our exhibition stand. In conjunction with the PDA, we’re able to present our products in live applications. Taking into account also the Composites Forum and the opportunity to present our product innovations in lectures, we consider this a well-rounded event.” Lothar Kempf, Managing Director, BÜFA Composite Systems GmbH & Co. KG “This is already GUNNAR’s sixth time at COMPOSITES EUROPE. We’re honoured and delighted to be a part of the event again. First off, it’s nice to see that the trade fair is growing year after year – each year brings amazing improvements. Second, it’s also nice to see that it’s a mix of industry meeting place and innovative gathering spot for people who truly want to make decisions, i.e. entrepreneurs and technical directors, people who come to see the equipment, the solutions, who want to have explanations and who are also willing to invest in this technology.” Thomas Schwarz, Marketing Director, GUNNAR “COMPOSITES EUROPE is another great success for us. We held excellent talks. That’s great. The trade fair reflects how innovative the industry is and at the same time offers us the benefits of the German market. That’s why we like to come here. We look toward the future with optimism.” Christian Fuchs, Managing Director, CrossLink Faserverbundtechnik GmbH & Co. KG
“We’re very satisfied with the trade fair. This was already our third time here, and we’re very pleased with the visitor response. We don’t just meet production equipment manufacturers here at this marketplace but also end customers and adhesives manufacturers – and that’s very interesting for us. We think the composites industry is very attractive, especially its growth rates – not just in lightweight automotive construction but also in other sectors where lightweight construction and composites are becoming more and more prominent.” Michael Lachner, Managing Director, intec Bielenberg GmbH & Co. KG
“COMPOSITES EUROPE is very important to us. We are very excited to be here this year again. Specifically because of the quality of traffic. For example last year we were able to convert two contracts of leads generated right here at the COMPOSITES EUROPE. That’s why we this year decided to launch our brand new 3D Laser equipment with our new US-Partner at the Stuttgart Show.” Stefan Dragitsch, Managing Director, JETCAM Composite GmbH
|
Scooped by
MaterialsReview
October 1, 2015 2:36 AM
|
Delta Group is engaged in the development and supply of high-quality prepreg, primarily for premium automobile applications. It has been highly rated by the market for its wide range of products and services that meet customer needs, and diligent technical services allying with customers. So far, Toray has been enhancing a cooperative relationship with the Delta Group through supply of carbon fiber Torayca®, and this stock acquisition significantly reinforces its carbon fiber intermediate business in Europe along with Composite Materials (Italy) s.r.l (abbr. CIT) it established by acquiring the carbon fiber textile and prepreg business from Saati S.p.A. in January this year. In coming years, Toray will accelerate product development in Europe by leveraging its high-grade, high performance prepreg technologies.
Further, having both CIT and Delta Group under its umbrella at the same time, and expanding products that exploit their respective strengths, enables Toray to respond broadly to the market requirements that are getting even more sophisticated, especially to conquer new frontiers in the carbon fiber composites industry. It also enhances Toray’s structure to offer solutions to customers at each level of its own integrated supply chain by combining Toray Carbon Fibers Europe S.A. (abbr. CFE), a French subsidiary which produces carbon fibers from precursor and distributes it, as well as Euro Advanced Carbon Fiber Composites GmbH (abbr. EACC) and ACE Advanced Composite Engineering GmbH (abbr. ACE), German subsidiaries that produce and distribute carbon fiber reinforced plastic (CFRP) parts.
Under the current medium-term management program Project AP-G 2016, Toray positions the Carbon Fiber Composite Materials Business as one of the Strategically Expanding Businesses and is pursuing business expansion through active investment of management resources. Going forward, it will continue to drive forward further business expansion through sophistication of the business by enhancing its supply chain in each region of Americas, Europe and Asia.
|
Scooped by
MaterialsReview
September 29, 2015 3:25 AM
|
Lightweight construction represents one of the greatest opportunities and prospective growth areas for the fibre composites industry. Demand in Europe is on the rise, and the sector is looking to the future with optimism, especially in Germany, a hub of innovation with above-average increases in the production of lightweight materials. The positive mood was reflected at the 10th Composites Europe edition, where the anniversary event set new records in terms of exhibitors, visitors and exhibition space, when it took place from 22-24 September.
Drawn to the Exhibition Centre in Stuttgart above all were lightweight construction experts from the automotive sector, aerospace, mechanical engineering, the sports and leisure industry, wind power, and the construction sector. Composites market continues to grow Glass-fibre reinforced plastics (GFRP) make up the composites industry's largest group of materials by far, with a share of over 95% of the total volume. GFRP production is on track to grow by 2.5% in 2015, reaching the highest level in eight years with an estimated 1.069 million tonnes. That's the finding of the current market report issued by the German reinforced-plastics industry association AVK, which was presented in Stuttgart.
Thermoplastic materials such as GMT and LFT are posting above-average growth rates. In addition to developing new products, researchers are focussed on multi-material composites systems in structural components. "The development of multi-material systems beyond individual materials groups remains one of the biggest challenges for the composites industry", said Dr Elmar Witten, the managing director of AVK. Germany still top growth market The highest growth rates are being posted by the composites industry in Germany: the largest market for fibre-reinforced plastics in Europe is set to grow by 6% in 2015, followed by the Eastern European countries (4%) and UK/Ireland (3%). The main purchasers continue to be the transport and construction sectors, followed by the electrical/electronics industry, and the sports and leisure industry.
Trade fair visitors are also confirming the excellent economic prospects enjoyed by fibre-reinforced composites: 72% of respondents expect their respective sectors to experience upward economic momentum in the next three to four years. Only 18% forecast their industry to stagnate. Spotlight on lightweight construction A representative survey of trade fair visitors has shown that lightweight construction represents one of the biggest challenge areas for the industries that use fibre-reinforced plastics. About half consider lightweight construction a priority when it comes to developing innovative components, followed by the reduction of materials costs, automation and shorter process cycles. Supplementing the exhibition area at Composites Europe was an extensive congress and lecture programme that provided an outlook on the future of lightweight construction. Two new events premiered at Composites Europe: the 1st International Composites Congress and the bio!CAR Conference. "Composites Europe is an indispensable market staple. The response has been excellent again this year. We consider Composites Europe our trade fair partner – now and in future," said Dr Elmar Witten, the management spokesman of Composites Germany.
|
Scooped by
MaterialsReview
September 14, 2015 10:54 AM
|
Q&A with Mr. Holzner from hmb composite – Blog Interview – COMPOSITES EUROPE show in Stuttgart – booth number 7/F41 14 September 2015 | By Angela in Automotive Industry, Business, Composite production, Construction Industry, Design, Engineering, Exhibitors, Fiber, Manufacturing Q: Please introduce yourself. What are your responsibilities within your company Holzner Maschinenbau GmbH?
A: My name is Michael Holzner, I’m the founder and CEO of the Holzner Maschinenbau GmbH and Carbonice(.net). As we are a young company my focus is on stable growth, also a reason why we have a booth on Composites Europe exhibition, to find new partners to pursue our innovative business.
Q: What’s in your opinion a strong advantage of composites in comparison to conventional materials?
A: The really fine thing about composites besides its mechanical properties is, that prototypes can be realized more cost efficient than in other styles, but offers many possibilities that can’t be realized with metal plates for example. In addition e.g carbon composites look impressive if they are clear coated – an eye catcher – what is in many cases important as prototypes should persuade customers, or should demonstrate the innovative power of a company.
Q: Could you give us a quick overview of your company Holzner Maschinenbau GmbH?
A: Holzner Maschinenbau is a young Startup that publishes innovative products in a framework of own brands in different fields. Our first brand is called Carbonice, herewith we develop, produce and distribute high quality bike components to the whole world, they are sold e.g. to Korea as well as Brazil.
As we cover the whole process from innovative ideas over development and testing, to the ready to sell product we have a widespread knowledge. Therefore we also work with customers in industries. Our references are, besides the bike industry, FESTO and AUDI as well as research facilities like the University of Esslingen, which is around the corner to Stuttgart.
Q: Has your company always worked in the field of composites?
A: Yes, we are enthusiastic about new technologies and materials. Composites give us so many potentials, that’s the field where Holzner Maschinenbau GmbH will grow further.
Q: What kind of projects have you undertaken for clients?
A: We can realize small and very complex parts what we did for a customer in bike industry, e.g. a collar for fixing a brake lever at handlebars. That part was laminated at a long profile and is finished with our in house 4 axis milling machine, as it has to be machines from several sides. That part replaces an aluminum part what weight triple but costs nearly same. As the customer was a trade company, we covered the whole process including design and testing.
For another company in the area of Esslingen we produced a housing for a prototype machine in a vacuum infusion process. The nice thing about the vacuum infusions process is that the part size is nearly unlimited but the quality is high, so we can act very flexible.
We also did filament winding on prototype low pressure vessels, which were very lightweight, but incredible resistant.
Q: Finally, are you looking forward to the COMPOSITES EUROPE show?
A: Definitively I do, I’m sure to fine many important contacts there, as our service meets the need of many small and medium-sized businesses. The fair is located in the heart of Germanys mechanical engineering and automotive area, so nothing can go wrong.
Many thanks for this interesting interview. For more information please click http://bit.ly/1iafJcO
|
Scooped by
MaterialsReview
September 11, 2015 11:22 AM
|
Composites UK calls for skills overhaul With composite manufacture relying heavily on skilled individuals, the industry is making moves to standardise training and increase its workforce. The composites industry relies on the specialist skills of its workers, and it has been well documented that the size of the workforce is not keeping up with the current growth in business, let alone the predicted growth figures for the industry. Young people are not choosing a career in the composites industry for a variety of reasons including a lack of teaching about composites across the education system coupled with misperceptions about skill recognition within the sector.
As the Trade Association for the UK composites industry, Composites UK is working with its members to develop a nationally recognised system of competency standards across the main processes used in composites manufacture through the Composites Assured Practitioner Scheme (CAP). The CAP scheme, currently in the pilot phase, has developed competency lists and assessment criteria for pre-preg, which are now being developed for the wet lay-up and resin infusion processes.
It’s important that companies understand the skill levels of their current employees so that the appropriate training and guidance can be put in place where needed. Achieving CAP accreditation demonstrates the company is meeting a recognised level of operation, as the standards are compliant within audited schemes such as NADCAP, ISO standards and SC21. This in turn will assist UK companies in winning exciting projects by giving the customer increased confidence in the work quality.
The CAP scheme will be overseen by the British Composites Society to provide the link to professional institutes, and long-term will fit in with apprenticeship schemes and graduate programmes.
Individuals will develop their own ‘passport’ of competencies assessed against the guidelines, giving them a bronze, silver or gold rating in that skill. Sub-contractors will also be eligible to register for a passport enabling them to demonstrate expertise to potential employers with reassurance.
The scheme is currently in its pilot phase with AIM Composites, Aircelle and Combined Composites Technologies all taking part. Composites UK is looking for other companies to join the pilot in any of the three technologies being covered at this stage.
David Howell, quality assurance manager at AIM Composites says: “It provides the ability to standardise the skill levels of the nationally available workforce via the proposed Composites UK registration database, therefore giving the ability to check the competency of prospective employees. Operating alongside our internal training programme we know this will help us increase skill levels and consequently improve the quality and delivery of components to our customers.”
|
Scooped by
MaterialsReview
September 10, 2015 8:25 AM
|
Car companies will soon make use of 3D printing to manufacture parts, bringing benefits in cost and strength that will improve the affordability and driving character of future vehicles, according to BMW's head of lightweight design Florian Schek.
While most vehicle manufacturers use the advanced technology during the development and design phase to quickly create prototype parts or models, Schek believes it won't be long before the technology is transferred into end-consumer production techniques.
He admitted that it is likely to be used on low-volume speciality vehicles first as the time needed to mass-produce parts by 3D printing is not as quick as conventional methods such as casting and forging for metals, or as affordable as plastics. But he said the rapid advances in the technology will ensure its future application is viable.
"We have that already in prototyping," he told Drive.
"But there is definitely a future for it in mainstream production. It will come.
"I think it will take some time in high-volume production, but it is not that far away for specialist models like the i8. We can do some very interesting things with 3D printing that we cannot do with other methods and it is quite exciting about the benefits, both in terms of design and structure."
Schek said the benefits of 3D printing structural elements – including major components such as shock absorber towers – could see improvements in weight reductions and rigidity, as the printing process could create components more intricately.
"With 3D printing we can see advantages in being able to build parts with strength where it is needed and not in places where it isn't, and this will help improve decreasing weight. We can design the part according to the forces that are running through it, this will be a big step forward for some areas," he told Drive during the launch of the all-new BMW 7-Series, which uses different materials in its skeleton – including steel, aluminium and carbon fibre – to reduce weight and increase overall strength.
"I can also see it eventually improving time to production in some circumstances too, because some components currently need to go through many processes to be ready for assembly whereas with 3D printing it is designed to be a finished product."
|
Scooped by
MaterialsReview
September 9, 2015 5:39 AM
|
Composite Advantage has introduced a new wear surface option for its fibreSPAN pedestrian bridge deck and rail platform products.
After evaluation and testing, Composite Advantage explains they selected the Matacryl system which combines quartz aggregate in a methyl methacrylate polymer for greater durability, less roughness and higher elongation than conventional non-slip wear surfaces. The product is similar to the polymer concrete surfaces used on vehicle bridges making Matacryl a robust choice for areas experiencing heavy use.
"FRP decking is continuing to gain ground in pedestrian bridge and rail platform projects," says Scott Reeve, President of Composite Advantage, "especially in larger cities where these types of structures endure the wear and tear of daily foot traffic and seasonal activity like snow removal. The demanding requirements of these rugged environments prompted adaptation of Matacryl to these types of applications."
According to Composite Advantage, Matacryl has been used in Europe extensively, but was just recently introduced to North America. Its ¼ inch wear surface has been UL tested for fire resistance. The product weighs two pounds per square foot and costs just a few dollars more per square foot than a traditional wear surface product; while lasting up to five times longer. High elongation (greater than 100%) allows the surface to withstand high impact at cold temperatures. Matacryl comes in a variety of colours and is immune to UV radiation and fading.
In addition to its new product, Composite Advantage says it will continue to offer its traditional wear surface treatment for applications that do not have a high traffic count, such as trail and park bridges. Composite Advantage says it is the leading manufacturer of very large Fibre Reinforced Polymer (FRP) composite parts, up to 100 feet, for structurally demanding applications and corrosive environments.
Photo provided by Composite Advantage.
|
Scooped by
MaterialsReview
September 4, 2015 3:44 AM
|
In its first year of operation, Deakin University's Carbon Nexus research centre has attracted industrial partners from nine countries, produced 75 batches of carbon fibre for research trials, and received nine local and national research excellence awards.
The birthday celebrations began early with the announcement of a US 4.7 million ARC grant for the new Future Fibres Industrial Transformation Research Hub (ITRH) in May, to develop advanced carbon fibres and nanofibres to support more sustainable and advanced manufacturing.
“The Australian Research Council (ARC) funding for the ITRH is one example of how government and industry are confident in Carbon Nexus' capacity to lead the way on the path to creating the world's best carbon fibre and to driving the jobs of the future,” explained Derek Buckmaster, Carbon Nexus Director. Positive outlook
With the recent announcement of a US 1.76 million Geelong Region Innovation and Investment Fund grant for Carbon Nexus and Quickstep to establish a dedicated automotive division to be located at Deakin University, the future of Carbon Nexus – and Geelong – is looking positive.
“There are so many reasons to be excited about the future of advanced manufacturing through the development of better, lighter, stronger and more cost-effective carbon fibre,” said Mr Buckmaster.
“Carbon Nexus is well on the way to developing the most cost-effective PAN (polyacrylonitrile) based carbon fibre targeted for specific applications. This brings us one step closer to one of our main aims – reducing the cost of industrial-grade carbon fibre materials.” Capabilities of carbon fibre
Mr Buckmaster, who has just returned from a visit to the US where he participated in the inaugural meeting of the Institute of Advanced Composites Manufacturing Innovation (IACMI), said the global manufacturing industry was growing increasingly excited about the future capabilities of carbon fibre and that Carbon Nexus was playing a key role in its advancement.
“Our carbon fibre production line is embedded within Deakin University, enabling innovative research outcomes and already working with industry on projects that are helping to drive the jobs of the future,” he said. “Building a new industry takes commitment, an unwavering focus on innovation and strong partnerships between academia and industry – and that is what goes to the heart of Carbon Nexus.”
Research Director Professor Bronwyn Fox agreed, noting that the first year of activities for Carbon Nexus represented the culmination of the vision that was seeded at Deakin in 2008. “Seven years ago we imagined Carbon Nexus to be a world-leading carbon fibre research institute, attracting future industries to research and invest in Geelong, and now this vision is becoming a reality,” she said.
|
Scooped by
MaterialsReview
September 4, 2015 2:08 AM
|
Jackson, TN –-(Ammoland.com)- Kinetic Concealment, manufacturers of the neoprene-backed leather hybrid IWB holster line, introduces the Kinetic Concealment Carbon Fiber Wallet.
The Kinetic Concealment Carbon Fiber Wallets is manufactured using Carbon Fiber Layered Kydex and is ideal for a slim carry fit.
The wallet holds credit cards and identification secure in the carbon fiber fold, and comes standard with a clip on the back side for clip-on carry or to secure cash in a money clip fashion.
The wallets are available online for $39.99 at www.kineticconcealment.com
About Kinetic Concealment Kinetic Concealment uses the finest of top-quality materials all made in the USA. The foundation of our holsters is made of an 8 ounce top-grade drum dyed leather, then it is kinetically bonded with our nylon-neoprene backing. Our shells are .093” thick Kydex and are vacuum formed for a tight and snug click fit. You can rest assured that your Kinetic Concealment holster will give you a lifetime of comfort and solid performance.
|
Scooped by
MaterialsReview
September 3, 2015 1:27 PM
|
A hydrogel–fabric composite that can support a load almost three times greater than the fabric alone has been made by scientists in Japan and the US.
For many applications, an ongoing challenge is to develop materials with seemingly contradictory properties. For example, the biomedical field wants materials that are tough, yet soft, wet, flexible and biocompatible – quite a tall order. Many researchers have spotted the potential of hydrogels, which are known for being soft and biocompatible, but limited by their lack of strength.
‘The current interest is to develop hydrogel-based materials that are flexible in bending and stiff in stretching,’ says Jian Ping Gong from the Hokkaido University. Gong’s group want to make synthetic materials with similar properties to biological ligaments – tough with the ability to load-bear, but also soft and bendy.
Natural ligaments incorporate collagen fibres within a gel matrix. But mimicking this approach with fibres and hydrogels is not without its challenges: ‘Conventional hydrogels usually have weak adsorption in the solid phase due to extensive swelling in water after preparation,’ explains Gong.
In this new study, Gong, together with Alfred Crosby from the University of Massachusetts, US, and their co-workers, modified the fibre-reinforced hydrogel design by combining a tough glass fibre fabric with a polyampholyte hydrogel. They found their formula had a synergistic effect; the mechanical properties of the hydrogel–fabric composite far outperformed the individual components. The fracture energy of the composite is 250,000J/m2 – much higher than the fabric alone (75,000J/m2) or existing fibre-reinforced hydrogels (4,000–30,000J/m2).
Hydrogel choice is key. Polyampholyte gels are made from equal amounts of oppositely charged monomers. And unlike typical hydrogels, which swell in water, polyampholyte gels shrink. When making the composite, ionic bonds form between hydrogel monomers to trigger the de-swelling. This action enhances adhesion between the gel and the fibres, anchoring the fibres closer together and thus makes the fabric stronger, tougher, and less likely to tear. Importantly, the fabric still retains a high water content.
‘It’s easy to make a material tough; it’s not as easy to make it tough with a lot of water in it,’ says Kenneth Shull, a polymer scientist at Northwestern University in the US.
Shull also comments that the research brings up some interesting issues. ‘Friction is really important for the toughness of a fabric and this work moves the field forward by considering the friction between the fibres and how the matrix gel actually mediates that.’
The team hope their work will spark a new generation of mechanically robust composites for potential applications in prosthetics, tear-resistant gloves and bulletproof vests.
|
|
Scooped by
MaterialsReview
October 7, 2015 4:00 AM
|
Airbus Helicopters is replacing aluminum in a fitting in the aircraft door of the Airbus A350-900 with a high-modulus, carbon fibre-reinforced high performance polymer.
According to Victrex, the brackets, now manufactured from its PEEK 90HMF40, have been developed by Airbus Helicopters and are in serial production for commercial use after receiving the relevant component qualification. The successful substitution of metal has resulted in a 40% reduction in weight and costs. The injection-moulded polymer solution replaces the higher cost manufacture of the bracket machined from an aluminum block.
Victrex explains that the fibre-reinforced polymer (FRP) structure of the A350 XWB's aircraft door uses an outer skin coupled with a bracing structure on the inside. A fitting, now manufactured from Victrex PEEK 90HMF40 thermoplastic, connects the outer skin to points on the internal bracing structure. The two components form a box-type support structure to exploit the maximum geometrical moment of inertia.
Christian Wolf, Head of Aeroplane Doors Research and Technology at Airbus Helicopters, explains the operation and significance of the PEEK component, "In terms of the standard load case, i.e. the internal cabin pressure, this point-type joint reduces the deformation on the outer skin, thereby maintaining the aerodynamic quality of the aircraft door. All components in the aircraft door are of a singly-redundant design. If a component near the bracket fails, the bracket will provide an alternative path for transferring structural loads and is therefore part of the aircraft's primary structure."
Victrex says that, by using its carbon fibre reinforced PEEK 90HMF40 polymer instead of the aluminium previously used, Airbus Helicopters has successfully manufactured an equivalent component that provides a range of benefits. It claims that weight and production costs have each been reduced by 40%. In addition, joining the PEEK component, instead of an aluminum component, to a thermoset makes drilling much easier. Optimised carbon fibre reinforced plastic (CFRP) drills improves the quality of the holes compared with the previous solution.
Specified by Airbus, Victrex claims its PEEK 90HMF40 easily withstands the moisture that continuously accumulates inside aircraft doors, whereas aluminium, which is prone to corrosion, needed a special surface coating to prevent corrosion. "The suitable material, supplied by Victrex, as well as their expertise and collaboration with their materials experts have contributed to the successful development and component qualification. The expertise gained from the initial use of fibre reinforced PEEK can be transferred to other components and to other areas of application with similar requirements," says Wolf.
Victrex explains, in the aerospace business, the "design and build" process, e.g. development in accordance with a given specification, is a possible option for producing structural components. In this process, the developer has additional freedom in matters such as the selection of materials. "90HMF40 is a special high performance thermoplastic which is also suitable for load bearing structural components as now used for the first time in the Airbus A350-900 and therefore in regular airline operations. This first application is certain to be quickly followed by others," explains Uwe Marburger, Aerospace Business Development Manager at Victrex.
|
Scooped by
MaterialsReview
October 7, 2015 2:33 AM
|
The ULV team selected high performance lightweight composite materials and technologies, including Scott Bader's carbon fibre compatible Crestapol 1250LV acrylic laminating resin for the outer shell and the carbon fibre composite (CFRP) chassis frame, and Crestabond M1-20 primer-less structural adhesive to bond a variety of CFRP and metal parts used internally.
The ARION1 Land Speed bicycle, designed and built by The University of Liverpool Velocipede (ULV) Team, has recently competed in the IHPVA "World Human Power Speed Challenge", which took place from the 14-19 September 2015.
Now in its 16th year, this annual speed trial event attracts engineering teams from all over the world to test their designs and their rider's endurance on the famous five mile highway road at Battle Mountain, Nevada, US.
The ULV Team is made up of sixteen undergraduate engineering students, all currently studying for their Masters of Mechanical Engineering (MEng) at the university. The team, which is the first UK university student team to enter the IHPVA event, designed and built the ARION1 two-wheeled velocipede to compete in the main human powered speed challenge "200 metre flying start single rider" category.
According to Scott Bader, the design, engineering and materials selected for ARION1 focused on maximising the aerodynamic performance and minimising the overall weight of the vehicle. Structurally, it needs to handle the high force through the pedals driving the front wheel, support a single rider in a recumbent position and be stable in a straight line at speeds of over 80 mph. Its overall dimensions are approximately 2.8 metres long by 0.85 metres high and 0.5 metre wide. The rider or 'pilot' of the ARION1 velocipede sits almost flat with legs forward, completely enclosed inside a two part carbon fibre composite body shell; the top half is removable to enable rider access.
Carbon fibre reinforcements, foam core materials and related design and processing technical support were provided by key sponsors of the student project including: Far-UK, Evonik, the UK National Composites Centre (NCC), as well as Scott Bader.
Scott Bader claims, the use of carbon fibre with Crestapol high performance resin inside and out of the ARION1 was extensive to achieve the strength to weight ratio needed for this type of speed challenge vehicle. The aerodynamic, rigid, thin walled, outer body shell is a sandwich laminate construction, moulded using carbon fibre fabric, Crestapol 1250LV infusion resin and cut-to-size sections of ROHACELL IG rigid closed-cell PMI foam core. The entire internal frame and where possible other components, such as the seat, the front end section and push rods, were also CFRP fabricated parts.
For the critical h-shaped high load bearing frame section that fits around the front wheel supporting the wheel strut, drive chain system and pedals, Far-UK recommended an infused part design using its AxontexTM carbon fibre (CF) braid and foam core system with Crestapol 1250 LV resin. This lightweight, high modulus, infused sandwich laminate specification was finally chosen by the ULV Team in preference to an epoxy prepreg based option that had also been tested; the Axontex CF braid system provided the flexibility needed to wrap around the curved sections and to accurately conform around machined sections of ROHACELL IG foam core. Dry lay-up and vacuum infusion at room temperature of the h-section was completed in just a few hours. The use of Crestapol 1250 LV enabled low temperature, rapid cure infusion of the part without any mould expansion. Scott Bader explains that this was a critical factor for the team as the mould was also used as a jig to machine holes in the frame components, so maintaining mould dimensional accuracy was critical. The Crestapol infusion resin was specified as it is fully compatible with the CF braid and was simple to process at ambient temperature to provide the combination of very high strength, stiffness and toughness needed for the bike frame, with no requirement for any post curing.
To minimise weight, Scott Bader says Crestabond M1-20 was used extensively throughout the interior of ARION1 to structurally bond CFRP, metal and wood parts, as well as a number of Big Head metal fasteners and fixings of the team's own design. This included CF-CF bonding of the front end section and the lay shaft mounts into the outer body shell, as well as bonding the anodised aluminium head tube and crankset mounts to the carbon fibre front end member.
The 2015 attempt by the UVL Team made UK record breaking history, with Ken Buckley setting a new human powered British land speed UK record of 75.03 mph piloting ARION1. However, the UVL Team were unable to match the Canadian Team AeroVelo, whose co-designer and rider, Todd Reichert, set a new IHPVA world record of a staggering 85.71 mph. Work on ARION2 is already underway by third year engineering students, for a ULV Team to compete again in 2016.
|
Scooped by
MaterialsReview
October 6, 2015 8:56 AM
|
Dell has announced plans to increase the amount of recycled materials that’s used to manufacture including excess carbon fibre.
Dell has partnered with Sabic to recycle excess carbon fibre and scrap raw materials into new Dell products starting in late 2015. The company has initially selected its Latitude and Alienware lines to contain the recycled carbon fibre and plans to expand the programme across these two product lines in 2016.
Dell estimates that by partnering with Sabic, it will prevent 820,000 pounds of carbon fibre from ending up in landfills. The recycled carbon fibre materials have an approximately 11% smaller carbon footprint than simply using virgin carbon fibre.
Since Dell began its closed-loop recycled plastics supply chain in January 2014, the company has recycled 4.2 million pounds of closed-loop plastics into enclosures for new Dell products. These plastics were used in more than 30 flat panel monitor models and three Dell OptiPlex desktops available globally, with plans to scale across servers and other products in 2016. Dell’s process was certified by UL Environment as the first closed-loop supply chain, and continues to be the only one in the industry. Dell was also able to reduce its product carbon footprint via the closed-loop products by 11% and realised a cost savings over previous sources.
|
Scooped by
MaterialsReview
October 1, 2015 2:41 AM
|
Carbon fiber-reinforced polyurethane (PUR) composites offer huge potential for reducing vehicle weight and thus also CO2 emissions. Covestro, formerly Bayer MaterialScience, has developed a new Baydur® matrix system for carbon fiber structural components that has three times the energy absorption potential of comparable resins. It is therefore able to provide an extremely high level occupant safety in the event of a collision. Automakers and direct suppliers also benefit from high productivity, because the components are manufactured efficiently using the state-of-the-art high-pressure resin transfer molding (HP-RTM) process.
“We developed the polyurethane system with high-profile partners in the automotive industry and optimized it for the latest requirements,” explained Detlef Mies, expert for RTM composites at Covestro. “Our partner ThyssenKrupp used it to manufacture prototypes at its state-of-the-art Composites Technical Center in Dresden. These have performed extremely well in material testing.” Carbon fiber content is approximately 54 percent by volume. Material data are available on request.
The HP-RTM process has proved very effective for manufacturing robust composite parts in volumes in the low hundreds of thousands. Wovens or fabric with oriented carbon fibers are first laid in the open mold, which is then closed. In the space of a few seconds, the low-viscosity PU system is injected into the closed mold under high pressure. Thanks to the high reactivity of the PU system, the composite cures rapidly and fully (Snap Cure), and the component can be demolded and processed after a short time. Cycle times are just a few minutes, with consistently high quality.
Various polyurethane matrix materials from Covestro are already being used successfully to manufacture composite materials via RTM, the pultrusion process and other process technologies.
More information: www.covestro.com
|
Scooped by
MaterialsReview
September 29, 2015 4:58 AM
|
Engineers building NASA’s Orion are making manufacturing improvements for the spacecraft ahead of its missions to deep space destinations near the moon and on the journey to Mars.
The Orion capsule’s heat shied successfully survived its test flight last year reaching temperatures of about 4,000 degrees Fahrenheit and speeds approximately 80 percent of what it will endure when it comes back from missions near the moon, all while keeping the temperature inside the crew module in the mid–70s. Post-flight examinations of the heat shield confirmed it performed well within expected tolerances.
The heat shield was composed of a titanium skeleton and carbon fibre skin that gave the crew module its circular shape on the bottom and provided structural support, on top of which a fibreglass-phenolic honeycomb structure was placed. The honeycomb structure had 320,000 tiny cells that were individually filled by hand with an ablative material called Avcoat designed to wear away as Orion returned to Earth through the atmosphere. During the process, each individual cell was filled by hand as part of a serial process, cured in a large oven, X-rayed and then robotically machined to meet precise thickness requirements.
However, during the manufacture of the heat shield for Orion’s flight test, engineers determined that the strength of the Avcoat/honeycomb structure was below expectations. While analysis showed, and the flight proved that the heat shield would work for the test, the EM–1 Orion will experience colder temperatures in space and hotter temperatures upon reentry, requiring a stronger heat shield.
Through lessons and data obtained from building and flying the heat shield, the team was able to make a design update for the Avcoat block design that will meet the EM–1 strength requirements. It is also expected to provide a cost savings and shorten the current heat shield manufacturing timeline by about two months. Engineers have now folded the update into the design review that will lock down the design for the next version.
|
Scooped by
MaterialsReview
September 18, 2015 10:26 AM
|
SGL Group to showcase innovative material solutions at Composites Europe 2015 0 comment At this year’s Composites Europe, the European industry trade show for composite materials taking place from September 22-24 in Stuttgart, SGL Group will be presenting its innovative material solutions along the entire value chain, from carbon fibres, textile products and prepregs to carbon fibre-reinforced components (CFRPs). “With the constant development of our portfolio, we can offer our customers tailored and innovative solutions in the fields of fibres and components, resulting in significant benefit to customers thanks to favorable process capability and enhanced properties. We will be demonstrating this with the many product innovations on show at Composites Europe,” commented Andreas Wuellner, Head of Business Unit Carbon Fibres and Composite Materials. ICV prepreg In addition, SGL Group will be showcasing its current development activities. For the first time, the company will present an isotropic nonwoven prepreg (ICV prepreg) based on recycled carbon fibres combined with an epoxy resin.
Due to a new manufacturing process that makes it possible to use recycled carbon fibres, this material possesses almost isotropic mechanical properties, according to the manufacturer. The ICV prepreg has an entirely new type of surface appearance and can be used in pressing processes as well as conventional autoclave processes. These characteristics make the material especially interesting as a means of opening up new applications with epoxy resin prepregs, the company reports. SIGRAPREG prepregs The SIGRAPREG prepregs of SGL Group can also be combined with new fast-hardening resin systems that are currently being developed with a view to the requirements of future large-scale component production. These snap-cure resin systems are said to combine great hardening times, good storage stability and adhesiveness of the pre-impregnated semi-finished products optimized for automated machining. An additional highlight in terms of innovative product solutions will be the presentation of the SIGRAPREG TowPreg, which has already been shown for the first time at JEC 2015. These pre-impregnated rovings made from carbon or glass fibres are especially suitable for challenging winding and lay-up processes thanks to their outstanding winding properties, which results in excellent mechanical properties in the component. Thermoplastic fibre composites As an innovation in the field of thermoplastic fibre composites, SGL Group will be presenting long fibre-reinforced thermoplastics (LFRPs) for the first time. These materials are available as both glass fibre-reinforced and carbon fibre-reinforced semi-finished products on the basis of various plastic types and enable significant inherent benefits, such as short cycle times, weldability, good recyclability and ease of combination with other thermoplastic semi-finished products. The new thermoplastic materials and their applications will be presented at the trade show using the example of a front end. This is made from LFRP consisting of glass-fibre-reinforced polyamide (GF-PA6). Unidirectional (UD) tapes and carbon fibre-based organic sheets are integrated directly in a manufacturing process step and thereby reinforce structures of the front end under high local stress.
|
Scooped by
MaterialsReview
September 14, 2015 2:51 AM
|
When a custom car shop reaches a certain level of notoriety, be that a TV show or a million Facebook likes, the owner usually decides to open a gift shop with branded merchandise. We have no problem with that, but when the company in question is Forgiato, things can get crazy.
If you're into any kind of car, there's no way you don't know about Forgiato. They're the ones who make all those gigantic wheels for "donks", as well as chromed grilles for every Chevy, Cadillac or Chrysler you can imagine. More recently, the Forgiato dudes also began making custom wheels for exotic cars, like the Mercedes-AMG GT S Edition 1 we showed you yesterday.
That white coupe had been customized by our friends at Office-K, a Tokyo one-stop-shop of craziness. It seems Forgiato sent over not only the alloys but also a custom cigar case. Because that's what it means to be a total boss!
Hopefully, Osamu Tamura won't mind us sharing his personal Facebook photos. We just thought the carbon case was a one-of-a-kind idea that needed to be discovered.
After seeing the item for the first time, we did a bit of digging and found the cigar case is one of the most expensive items on the Forgiato online store. It costs $100 and comes complete with three of the finest tobacco goods you can find.
Carbon fiber is a good example of a technology that's being misused. After all, it was developed in motorsport as a way to save weight and add structural rigidity. But after road-going supercars started adopting it, carbon became a way of showing the world you are rich. Soon, the Chinese found ways to make the complex and expensive weave from cheap plastic.
OK, we may have deviated from the original story a bit, but I was trying to warm you guys up to the idea that the carbon cigar case might actually be made of metal and paint. Still, I can imagine Tony Montana with a set, so it's all good.
|
Scooped by
MaterialsReview
September 11, 2015 4:00 AM
|
I’m in Detroit, at the 2015 Society of Plastics Engineers’ (SPE) Automotive Composites Conference and Exhibition (ACCE), co-chaired by our contributor Dale Brosius and organized by our contributor Peggy Malnati. And I’m seeing real composite cars, and real, in-production composite parts. I’m also thinking about the recent article published in the September issue of CW on fast (snap) cure resins aimed at automotive applications. Before I get into what I’ve seen here at the show, I want to talk about an important resin product that I left out of that article in print: Daron resin transfer molding (RTM) resins from DSM Composite Resins AG (Schaffhausen, Switzerland and Zwolle, The Netherlands). DSM has updated the company’s RTM resin, trademarked Daron, to target fast processing of automotive structural parts. The new resin series actually consists of three resins, each with specific characteristics and Tg, but all tunable in regards to cycle time and specific designs.
Offering performance equivalent to epoxy, low-viscosity Daron was originally developed as a hybrid of unsaturated polyester and polyurethane. The hybrid system has been reported to consist of an unsaturated polyester polyol (A) component and an isocyanate (B) component of the MDI type. DSM says the resin chemistry provides high fracture toughness and good impact resistance, together with fast wetout, and is compatible with all fiber types. The company says Daron is relatively insensitive to process and fiber variation, and wets out carbon fiber very well. Sub-one-minute cure is possible, and cure can be tailored to part complexity and molding process by varying the mold temperature and accelerator type. Also, little or no post-cure is needed, and an efficient internal mold release system ensures hassle-free demolding in a serial production scenario.
In terms of Daron’s use by OEMs, DSM says the resins are currently being evaluated but no details can be discussed. That said, ESE Carbon Company (Miami, FL, US) is using Daron 200 to make an all-carbon aftermarket car wheel, reportedly the lightest carbon fiber wheels currently available at 5.2 kg, and rated for a maximum axle load of 1746 kg. The wheels are produced in ESE Carbon’s proprietary Next Generation Autoclave Process (NGAP), which combines a high-speed autoclave cure with liquid infusion. ESE Carbon chose Daron for its low viscosity, adjustable cure chemistry, good wetout of the carbon reinforcement and high mechanical properties at elevated temperatures, says company president Eric Escribano.
So, back to Detroit, and the 15th year of the ACCE event. It’s now so large that the exhibits are in the exhibit hall of the Suburban Collection Showplace, while the presentations fill three big ballrooms. Papers of note: I was not familiar with cellulose nanocomposites, so I was glad to hear the great presentation by Kim Nelson, vice president of nanocellulose technology at American Process Inc. (Atlanta, GA, US). She noted that cellulose nanofibers aren’t new, but that her company has found a way to produce cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) in a less-costly way while making the products more stable. Her group has also developed treatments for ensuring compatibility with polymer resins as well as much higher temperature resistance. She noted that her company is working with Futuris Group (Port Melbourne, Australia) on a sprayable binder resin containing CNFs for composite seating for Tesla cars. Another project involves collaborating with ORNL on using CNCs to reinforce and strengthen additive manufacturing /3D printing resins. Bottom line: even at very low concentrations, CNCs and CNFs can improve the properties of polymer resins, and in turn, composite parts, cost-effectively.
Parts of note: in the parts display, the chassis tub of the Zenos sports car is on display. Designed by Antony Dodworth, a fixture at ACCE events and the chief technical and manufacturing officer at his company Bright Lite Structures, with a wealth of Formula One design experience, the chassis is a complex honeycomb-cored structure with carbon face sheets that come from recycled carbon fabric off-cuts and trim waste. Each of the five elements of the tub incorporates intricate deep draws and shapes, made with Huntsman’s Victrox polyurethane resin and a plastic honeycomb. The tub elements reportedly are quickly layed in the mold, then sprayed with the resin, then thermoformed in a one-shot sub-15 minute cycle. The five pieces are adhesively bonded together, and to a central “spine” of aluminum extrusion that helps anchor the mid-positioned engine. David Bareis of Huntsman says the resin provides good toughness. Dodworth has designed the part with varying thicknesses of core to match loads, and with part consolidation in mind. No secondary operations are needed. This car is popular in the UK, particularly with racing enthusiasts, and about 30 cars are made per month. Here’s a link to a British car mag that test-drove the car, with pictures that include the carbon fiber tub: https://www.carthrottle.com/post/6-reasons-why-the-zenos-e10-s-is-the-best-sports-car-youve-never-heard-of/.
As Dale Brosius notes, we’ve entered a new era of “smart lightweighting,” where engineers are not just substituting composites for metals, but beginning to put materials where they’ll have the greatest impact on mass reduction, with the least cost penalty, in a more holistic approach to vehicle design. Perhaps it’s not what we expected 15 years ago, but it makes sense.
|
Scooped by
MaterialsReview
September 9, 2015 5:42 AM
|
German distributor and compounder Lehmann & Voss (LuV, Hamburg; www.lehvoss.de) has extended its range of technical compounds through the acquisition of WMK Plastics (Solingen / Germany; www.wmk-plastics.de). Financial details of the deal were not disclosed. LuV said the purchase broadens its existing portfolio of high-performance compounds and functional masterbatches.
WMK Plastics is a family-owned compounder with a workforce of 40 people. The company has been producing and selling engineering thermoplastics to customers in German-speaking Europe for more than 30 years, and offers a wide range of services from grinding and granulation to colouration. Its portfolio comprises technical compounds equipped with all kinds of fillers and additives.
The Solingen-based company will operate as an independent subsidiary within LuV, and will continue to be headed by its current managing director Thorsten Rosenbohm. Not part of the transaction is WMK’s regrinding facility in Wuppertal / Germany. Plasteurope.com was unable to obtain a statement from the company about the plant’s future.
LuV has adopted an internationalisation strategy as part of which it established a representative office in South Korea in May this year (see Plasteurope.com of 14.05.2015). Last year it also raised its activities in China and the US.
|
Scooped by
MaterialsReview
September 8, 2015 12:58 PM
|
A company that develops graphene and other nanoparticles for commercial use has entered an 18-month research project to help protect aircraft from lightning strikes.
The project is managed by the National Aerospace Technology Exploitation Programme (NATEP) and involves two end users, Airbus UK and BAE Systems.
Also taking part in the project are Cobham (lightning strike advice and testing), SHD Composites (carbon fibre reinforced epoxy resin pre-impregnated fabric supplier) and Haydale (supplier of functionalised graphene enhanced epoxy resins).
Ammanford-based Haydale has developed a proprietary plasma process for commercialising the use of graphene and other nanoparticles.
NATEP is providing a grant of up to £150,000 towards the £300,000 cost of the research project, of which Haydale Composite Solutions (HCS) will receive up to £100,000.
New materials will result in safer aircraft Carbon fibre composites are used extensively in aircraft applications such as fuselages, leading edges and wing surfaces.
However, because the composite materials are poor conductors of electricity they are prone to damage from lightning strike. This has led to aircraft companies incorporating copper or aluminium meshes into the composite materials which add significant weight and cost.
The aim of the project is to develop alternative composites that are better able to withstand lightning strikes. This would result in safer aircraft, weight and cost savings from the elimination of the expensive metallic meshes and saving production time associated with integrating the meshes into the structure.
Gerry Boyce, managing director of HCS, said the project was a “great opportunity” for the firm.
He said: “The ability to add graphene to change one of the fundamental characteristics of the base resin, in this case, electrical conductivity, is a most important development for composite engineers and could lead to a whole new generation of graphene enhanced composite materials.”
Haydale chief executive Ray Gibbs added: “At the beginning of June we announced the appointment of Ebbi Shahidi and Quentin Fontana to develop our aerospace division within HCS and I am very pleased with this early, significant development.
'We see this having a high potential for jobs and exports' “The support of NATEP is very welcome as it will accelerate our research in this area and enable us to collaborate with leading aerospace companies to develop new materials and structures at the forefront of emerging technology.”
Bridget Day, NATEP deputy programme director, said: “We are delighted to welcome Haydale into the NATEP programme. It is particularly pleasing to assist them with a practical application that uses the exciting properties of graphene in the aerospace industry.
“We see this as having a high potential for jobs growth and exports. NATEP is a £40m programme helping UK supply chain companies develop 100 novel technologies.
“It will also enhance UK supply chain capabilities and networks and enable them to deliver high added value to future aerospace products and services and increase their ability to win new business with higher tier companies anywhere in the world.”
NATEP is being implemented by the UK’s national aerospace strategy body, the Aerospace Growth Partnership, and includes £23m from the Government through its Advanced Manufacturing Supply Chain Initiative fund. It is also sponsored by leading UK aerospace companies Airbus, Bombardier, GKN Aerospace, Rolls-Royce and Spirit.
|
Scooped by
MaterialsReview
September 4, 2015 3:41 AM
|
An isocyanate-based resin system from Huntsman Corporation (The Woodlands, TX) is a key component of lightweight structural carbon fiber honeycomb sandwich panels developed jointly with Bright Lite Structures (BLS, San Francisco, CA). The technology has been employed in the production of chassis components for the Zenos E10 sports car.
Chassis components in Zenos Z10 feature a carbon fiber honeycomb sandwich panel structure.
The BLS fabrication cycle is reportedly substantially shorter than that for conventional composite materials. And unlike traditional carbon fiber composites, BLS composites are said to be suitable for high volume manufacturing.
The BLS composite fiber technology is based on proprietary structures that blend carbon fiber and other materials of varying densities. The resulting mixed structure produces the benefits of conventional carbon fiber composites, but is 15-20% lighter. The structure reportedly requires less resin and less carbon fiber compared with conventional carbon fiber composite materials. Further, there is often significantly less material waste during component production according to BLS.
Huntsman's Vitrox isocyanate-based resin technology reportedly plays a key role in enabling the fabrication of the novel chassis structure according to the company. BLS supplies the core and reinforcement package, which results in chassis that are lighter, less expensive and faster to manufacture than those made from conventional composites.
Huntsman will feature its latest polyurethane products for the automotive industry and host a booth at the Society of Plastics Engineers (SPE) Automotive Composites Conference & Exhibition (ACCE). The event is taking place Sept. 9-11, at The Diamond Banquet & Conference Center in Novi, Michigan. Huntsman has also entered the ACCE "Best Part" competition in conjunction with BLS, showcasing chassis components used in the E10. These include the front and rear bulkheads, the body sides, the floorpan and the cantrail. The latter component offers 35 mm more visibility and excellent stiffness.
"We look forward to showcasing the adaptability of our Vitrox resin by participating in the 'Best Part' competition with BLS," said David Bareis, Composites Sales Manager, Huntsman Polyurethanes.
|
Scooped by
MaterialsReview
September 4, 2015 1:55 AM
|
The 3D printing space has been filled with ups and downs as investors wait for the next big revolution. It's been a slow process, but Ford Motor Company F 0.22% gave the industry hope when it signed a deal with Carbon3D.
Carbon3D claims that its technology is capable of printing items 25 to 100 times faster than traditional methods. This reinforced the belief that speed is one of the essential components in creating the perfect 3D printer.
However, that is not the only area that needs to be improved.
"I believe the future of 3D printing is multi-material printing," Daniel Stolyarov, co-CEO of Graphene 3D Lab Inc GPHBF 0.15% , told Benzinga. "It's multi-material meaning functional material."
Related Link: 3D Printing Industry Won't Be 'Tested' Until Hewlett-Packard, Others Arrive
Stolyarov, who runs the company with Elena Polyakova, said that 3D-printed items need to consist of many materials.
"All of this material has to be combined together to make something useful, to make something that works," he said. "What we are doing is, we are doing functional materials. For example, the conductor for the filament we released. You cannot use wires for 3D printing. Metallic wires [have] different processing parameters than plastics. Metal has a much higher temperature than plastic. You cannot really combine them using the same kind of 3D printing machine."
Stolyarov said it would be "really beneficial" if 3D printers could use a wide range of materials instead of the simple options available today.
"It's coming from a static shape kind of structure to something that functions," he added. Elena Polyakova said she expects 3D printers to become more complex over the next 10 years.
"The difference between what we can do right now and what we can do in the future is like the difference between a calculator and a modern cell phone," she said.
Disclosure: At the time of this writing, Louis Bedigian had no position in the equities mentioned in this report.
|
FACC worked to develop the winglets with Airbus Group Innovations, the Dutch National Aerospace Laboratory (NLR), Institute for Manufacturing Technology and Advanced Materials (Fraunhofer IFAM) and the Spanish research center for composite materials (FIDAMC).