Composites
8.6K views | +0 today
Your new post is loading...

Popular Tags

Scooped by MaterialsReview
September 3, 2015 8:43 AM
Scoop.it!

China Is No Longer Cheap

China Is No Longer Cheap | Composites | Scoop.it

For the past 11 years, China was a second home for Scott Huff and he racked up frequent flyer miles as his company, Innovate Manufacturing, grew to four factories and an engineering services office there. Huff and Innovate’s focus going forward, however, has shifted to the U.S. where the company is opening a new injection and blow molding facility in Knoxville, Tenn.

In his September column, my editor, Jim Callari, wrote about the reshoring phenomenon, a topic I also tackled last March. China itself has been in the news these days, thanks to a flagging economy with particular weakness in manufacturing. The timing of those struggles and Innovate’s announcement was not lost on Huff, who also cautioned against counting on China’s imminent demise.

“These are interesting times,” Huff said, “but as I tell people all the time, nothing is a good or as bad as it appears to be. Things have changed, and China is under a lot of cost pressures. The cost of living in China has outpaced the growth of salaries in the last 11 years, and the cost of employing people in China has gone up substantially.”

As a result, Huff noted that labor intensive work, formerly a strong suit of China, was increasingly shifting elsewhere. For Innovate, which specializes in large reusable hydration products (picture sideline water jugs), labor costs were just one factor that pushed it to bring some manufacturing back to the states. Another big one was air—or rather the cost to ship it.

“If there are more than 8 ounces of air in that bottle, it better be very labor intensive to make it outside of the U.S.,” Huff said. Power costs also played a role, with Huff estimating that utilities in China are double what Innovate will pay in Tennessee. Finally, proximity to customers was key, with Knoxville a truck drive away from all the major population centers east of the Mississippi River.

Will companies still invest in China? Of course, the country has a lot to offer, not the least of which being a billion plus consumers. The reasons companies invest there, however, are changing.

“China is no longer cheap,” Huff said. “China is very capable, but the market is getting very competitive.”

MaterialsReview's insight:

Will companies still invest in China? Of course, the country has a lot to offer, not the least of which being a billion plus consumers. The reasons companies invest there, however, are changing.

No comment yet.
Scooped by MaterialsReview
September 3, 2015 3:55 AM
Scoop.it!

GRUPO ANTOLIN: Purchase of Magna International's interiors business wrapped up

GRUPO ANTOLIN: Purchase of Magna International's interiors business wrapped up | Composites | Scoop.it
Grupo Antolin (Burgos / Spain; www.grupoantolin.com) on 31 August completed the takeover of the interiors operations of Magna International (Aurora, Ontario / Canada; www.magnaint.com) – for previous coverage, see Plasteurope.com of 21.04.2015. The acquisition does not include Magna’s two joint ventures in China, the Spanish automotive interior components supplier said, adding that the takeover of these two is expected to close before the end of this year.

The purchase doubles Grupo Antonin’s size, lifting its sales to more than EUR 4 bn. With a workforce of over 27,000, the Spanish company will become the third largest global player in the automotive interiors market with a presence in Europe, North America and Asia.
MaterialsReview's insight:

The purchase doubles Grupo Antonin’s size, lifting its sales to more than EUR 4 bn. With a workforce of over 27,000, the Spanish company will become the third largest global player in the automotive interiors market with a presence in Europe, North America and Asia.

No comment yet.
Scooped by MaterialsReview
September 1, 2015 5:28 AM
Scoop.it!

It's smooth sailing for Composites One

It's smooth sailing for Composites One | Composites | Scoop.it
Composites One LLC has sailed its way to a Silver Exhibitor Award at the upcoming IBEX trade show.

Arlington Heights Ill.,-based Composites One is one of 15 exhibitors that will receive that award at the event, Sept. 15-17 in Louisville, Ky. The award recognizes contributions to IBEX and to the marine industry.

IBEX — the International Boatbuilders Exhibition & Conference — has been in operation for more than 20 years. In a news release, Composites One marketing communications director Marcy Offner said that the show “has always been willing to embrace new or more efficient technologies.”

Composites One distributes resins, reinforcements, gelcoats, pigments and related products from more than 450 suppliers. The firm has been solely owned by the Dehmlow family — through its Synergy 55 Corp. business — since 2012. Its history dates back to 1940, when Louis H.T. Dehmlow III and two business partners founded Great Lakes Solvents in Chicago.
MaterialsReview's insight:

In June 2014, Composites One bought the composites distribution business of Nexeo Solutions LLC for an undisclosed price. That deal moved Composites One close to $1 billion in annual sales.

No comment yet.
Scooped by MaterialsReview
September 1, 2015 3:28 AM
Scoop.it!

Unprecedented flex designed into 777X composite wings

Unprecedented flex designed into 777X composite wings | Composites | Scoop.it
With a 235-ft/71.8m wingspan, and the latest in composite material and design technology, the 777X will fly with wings designed to flex up during flight, giving the plane greater glide capabilities. A new Boeing video sheds some light on the design.
MaterialsReview's insight:

The 787's wingspan, however, is 197 ft/60m. Wingspan on the 777X will be 235.5 ft/71.8m. Boeing will use this length, and the latest design and materials, to create wings on the 777X that will be even more flexible, allowing it to glide more bird-like. Check out the above video for a short review of the theory and technology behind the flexible wing design.

No comment yet.
Scooped by MaterialsReview
September 1, 2015 3:23 AM
Scoop.it!

Aeroengine Composites, Part 1: The CMC invasion

Aeroengine Composites, Part 1: The CMC invasion | Composites | Scoop.it
GE Aviation (Cincinnati, OH, US) expects a tenfold increase in the use of CMCs in its engines over the next decade (readm ore in “Ceramic-matrix composites heat up” under "Editor's Picks"). One reason is that, unlike metals in the hot zone, CMCs don’t need to be air-cooled, freeing up flow to boost the engine’s propulsion and efficiency.

GE’s first CMC parts to enter service will be the static first stage HP compressor shroud in the LEAP engine. Also called HP turbine shrouds, and reportedly some of the hottest parts in a turbofan, 18 of these direct airflow to ensure turbine blade efficiency. They are manufactured using SiC/SiC at GE’s CMC-dedicated Asheville, NC, US, factory, which also will make the inner and outer combustion liners and stage 1 and 2 nozzles for the GE9X engine.

These parts not only reduce cooling air requirements but also improve durability. Finished parts from Asheville will proceed to Advanced Ceramic Coatings (ACC, Hickory, NC), which operates from the US facility of surface treatment specialist Turbocoating (Rubbiano di Solignano, Italy). ACC will apply GE’s proprietary EBCs to protect SiC/SiC components from surface recession (erosion) and expects to deliver its first coated parts later this year.

Although CMCs were first targeted to static applications, the real revolution, say proponents, will come with dropping weight and cooling in rotating parts. In February 2015, GE successfully tested CMC rotating parts in an F-14 military jet engine. Similar to the fan disk reduction enabled by CFRP fan blades, these CMC LP turbine blades allow smaller, lighter metal turbine disks (see Fig. 2) and bearings and other parts can be downsized, multiplying weight savings by as much as a factor of three.
MaterialsReview's insight:

According to GE Aviation’s CMC design section leader Jonathan Blank, replacing nickel alloys with CMCs inside the engine is a huge step and sets the stage for revolutionary jet engine design changes. GE is also exploring use of CMCs in helicopter engines and in gas turbines and compressors for electrical power plants.

No comment yet.
Scooped by MaterialsReview
August 31, 2015 4:48 AM
Scoop.it!

India establishes world’s first 100 percent solar-powered airport

India establishes world’s first 100 percent solar-powered airport | Composites | Scoop.it

In a move that’s expected to save 300,000 tonnes of carbon emissions over the next 25 years, the state of Cochin on the southwest coast of India is transitioning its airport to 100 percent solar power.

As of May 2016, the airport will run on 46,150 solar panels laid across 45 acres in a nearby cargo complex, and not only will the contribution to the environment be equivalent to planting 3 million trees, it will produce the power equivalent to run 10,000 homes each year.

MaterialsReview's insight:

According to Ariha Setalvad at The Verge, India already has 4 gigawatts of solar capacity, and using Cochin as an example, the Indian government has been encouraging other local airports to seriously consider how they can incorporate solar energy into their operations.

No comment yet.
Scooped by MaterialsReview
August 28, 2015 10:35 AM
Scoop.it!

The 10-minute carbon-fibre inspection - Canadian Cycling Magazine

The 10-minute carbon-fibre inspection - Canadian Cycling Magazine | Composites | Scoop.it
Carbon fibre is no longer the exotic material that it once was. The cycling industry has embraced its use with open arms and manufactures almost everything with it these days. With proper care, a carbon fibre bike with carbon parts can be a dream to ride and last a long time. When used for how it’s intended, carbon fibre has the upper hand in performance for most situations. Yes, it does occasionally break, and not all carbon fibre is created equal, but no other material can be manipulated the way carbon can. One thing that does ring true with all carbon components: they need to be inspected routinely for cracks or damage.
No comment yet.
Scooped by MaterialsReview
August 28, 2015 4:54 AM
Scoop.it!

Polymer Nanocomposite Market To Grow Exponentially Till 2022: Grand View Research, Inc. - Press Release

Global polymer nanocomposite market is expected to grow substantially over the forecast period owing to the increasing demand from the automotive sector. The market is classified based on product type including nanoclay, graphene, carbon nanotube, metal oxide, inorganic particle reinforced composites and nanofiber. The polymer nanocomposite market is predicted to witness significant growth owing to its increasing demand from various applications including aerospace engineering, electronics & semiconductors, defense, construction, energy, packaging and food & beverage.
MaterialsReview's insight:

In addition, strict government and environmental regulations related to automotive emissions is expected to propel the polymer nanocomposite market over the forecast period. Furthermore, increasing demand for packaged food coupled with rapid development in the construction industry is predicted to surge market demand over the projected period. North America is expected to contribute significantly towards market growth owing to the rapid development in the aerospace and energy sector.

No comment yet.
Scooped by MaterialsReview
August 27, 2015 3:18 AM
Scoop.it!

New report provides sustainable roadmap for automotive composites industry

New report provides sustainable roadmap for automotive composites industry | Composites | Scoop.it
Increasingly important

Fibre-based composites are becoming increasingly important in the manufacture of automotive components. These new materials look set to continue their penetration of the automotive sector, and their large-scale use in mass-production cars, trucks and other vehicles is being widely predicted.

The global composites industry - around 90% of which is currently glass fibre-based - is now worth an estimated Euro 80 billion, and over the past five years, automotive and transportation has grown to become its biggest sector by tonnage.
MaterialsReview's insight:

Composite materials have been used for non-structural car parts since the 1950s. In recent decades, automotive interiors have been increasingly produced from thermo-plastics, with semi-structural parts now widely made from thermoset composites.

No comment yet.
Scooped by MaterialsReview
August 26, 2015 3:11 AM
Scoop.it!

Composite Integration Announce New Distributor in Taiwan

Composite Integration Announce New Distributor in Taiwan | Composites | Scoop.it
Composite Integration has announced the appointment of Atech Composites as its exclusive distributor in Taiwan with additional non-exclusive rights to also sell in China, Indonesia, Vietnam, Thailand and Malaysia.
MaterialsReview's insight:

Atech is the specialist composites division of yacht builder Horizon Yachts who are already using Composite Integration Ciject equipment for the large-scale infusion of yacht structures as well as manufacturing smaller VRTM components.

No comment yet.
Scooped by MaterialsReview
August 25, 2015 7:40 AM
Scoop.it!

FAA to Review Flammability of Composites After Dreamliner Fire

FAA to Review Flammability of Composites After Dreamliner Fire | Composites | Scoop.it
The FAA is re-evaluating the flammability testing used to certify Boeing’s 787 Dreamliner after reports that the resins used in the composite materials provided “fuel for the fire” on the parked aircraft at Heathrow back in 2013.
MaterialsReview's insight:

The standards used in testing didn’t assume there would be insulation to trap the heat and energy and that the accident clearly demonstrates that if an intense fire starts on an airplane, the resin in the composites will burn and create a self-sustaining fire.

No comment yet.
Scooped by MaterialsReview
August 25, 2015 3:11 AM
Scoop.it!

Work Starts at Airbus on the Largest Carbon Fibre Wings in Civil Aviation

Work Starts at Airbus on the Largest Carbon Fibre Wings in Civil Aviation | Composites | Scoop.it

The wing has the same span of the company’s current A350–900 but 90% of the parts have been modified for the A350–1000 and the trailing edge has been extended to resize the wing for additional payloads and increased range.

At 32 metres long by six metres wide, the A350 XWB wing is the largest single part made from carbon fibre composite material in use in civil aviation today. They are designed and developed at Airbus’ facility in Filton, near Bristol, where a number of other systems are designed and tested including fuel systems and landing gear.

MaterialsReview's insight:

The wing has the same span of the company’s current A350–900 but 90% of the parts have been modified for the A350–1000 and the trailing edge has been extended to resize the wing for additional payloads and increased range.

No comment yet.
Scooped by MaterialsReview
August 25, 2015 3:08 AM
Scoop.it!

CAMX 2015 preview: TenCate Advanced Composites : CompositesWorld

CAMX 2015 preview: TenCate Advanced Composites : CompositesWorld | Composites | Scoop.it

CAMX 2015 preview: TenCate Advanced Composites
TenCate Advanced Composites (Morgan Hill, CA, US) will highlight several technologies.

TenCate Advanced Composites (Morgan Hill, CA, US) will highlight several technologies. TenCate TC275-1 is an out-of-autoclave (OOA) epoxy prepregs that features good moisture resistance and good hot/wet strength retention. This product has a dry Tg of 183°C and a 136°C wet Tg after saturation. TC275-1 has an extensive database on a variety of fibers including HexTow HM63, IM-7 and Grafil’s TR50S 15k fiber.  TC275-1 is in several active qualification programs and is in use in large-volume applications.

No comment yet.
Scooped by MaterialsReview
September 3, 2015 5:48 AM
Scoop.it!

AnalySwift Launches Purdue Software to Speed Modeling of Composite Materials, Structures

AnalySwift Launches Purdue Software to Speed Modeling of Composite Materials, Structures | Composites | Scoop.it

WEST LAFAYETTE, Ind. and NORTH LOGAN, Utah – Manufacturers and engineering firms in the advanced composites sector can now use new software developed at Purdue University to reduce the design cycle of materials and structures, and analyze models too complex for existing methods.

AnalySwift LLC, a commercial software provider, has launched SwiftComp, technology that provides efficient, high-fidelity modeling of composites and reduces analysis times without a loss of accuracy, while capturing details of composites that were unreachable using traditional methods. The company licensed the technology, which was developed by Wenbin Yu, associate professor in Purdue's School of Aeronautics and Astronautics.

Allan Wood, president and CEO at AnalySwift, said the company's customers span several traditional sectors including aerospace, automotive and energy.

"These sectors face challenges including getting products to market more quickly, designing earlier in the process and improving technical RD capabilities," he said. "Imagine the competitive advantages engineers and companies could achieve when reducing analysis time from days to minutes. SwiftComp can make that happen."

Wood said SwiftComp is more versatile than traditional analysis software.

"The software can quickly and easily calculate the effective properties of composites and heterogeneous structures and materials including composite laminates, woven composites, stiffened structures, sandwich structures, corrugated structures and other buildup structures and heterogeneous materials," he said. "As long as a building block for the structure can be identified, SwiftComp can compute the best structural model for use in macroscopic structural analysis. It also computes the local stresses in the microstructure, which is essential for strength and failure of composites."

Yu said SwiftComp strengthens the manufacturing and engineering sectors' ability to harness the full potential of advanced composite materials for various applications including sandwich structures, wind turbine blades, and composite aerostructures, cars and rotor blades.

"SwiftComp takes the fundamental building block of material as input, then outputs the structural properties needed for macroscopic analysis," he said. "The software can be used for virtual testing of composites or as a plugin to power conventional FEA codes with high-fidelity multiscale modeling for composites."

Wood said Yu's codes have been used by hundreds of researchers in industry, academia and national laboratories.

"Wenbin Yu is well known and highly respected in our field and he brings real-world solutions in the areas of structural mechanics, micromechanics, multiphysics modeling and multiscale modeling," he said. "Licensing SwiftComp further enables AnalySwift to deliver on our motto, 'Right results. Right away.' We are excited to demonstrate its value to engineers and companies that model composite materials and structures."

SwiftComp is available through cdmHUB, an online platform hosted at Purdue that encourages users to evaluate emerging and existing composite simulation tools, and hosts simulation challenges to educate and unify the composites community.

About AnalySwift LLC

Located within one of the nation's highest concentrations of advanced composites companies, AnalySwift LLC is well suited to provide users with a competitive advantage through cutting-edge technology for structural modeling and micromechanics modeling. Utilizing this technology, licensed from Purdue University and Utah State University, AnalySwift offers users the best compromise between efficiency, accuracy and versatility for multiphysics analysis of composite materials and structures.

About Purdue Research Foundation Office of Technology Commercialization

The Purdue Research Foundation Office of Technology Commercialization operates one of the most comprehensive technology transfer programs among leading research universities in the U.S. Services provided by this office support the economic development initiatives of Purdue University and benefit the university's academic activities. The office is managed by the Purdue Research Foundation, which received the 2014 Incubator Network of the Year from the National Business Incubation Association for its work in entrepreneurship. For more information about funding and investment opportunities in startups based on a Purdue innovation, contact the Purdue Foundry at foundry@prf.org. For more information on licensing a Purdue innovation, contact the Office of Technology Commercialization at innovation@prf.org

MaterialsReview's insight:

AnalySwift LLC, a commercial software provider, has launched SwiftComp, technology that provides efficient, high-fidelity modeling of composites and reduces analysis times without a loss of accuracy, while capturing details of composites that were unreachable using traditional methods.

No comment yet.
Scooped by MaterialsReview
September 2, 2015 3:55 AM
Scoop.it!

TeXtreme Key to the New Cobra Puma Golf Driver

TeXtreme Key to the New Cobra Puma Golf Driver | Composites | Scoop.it

Cobra Puma Golf has taken the golf industry to a new level; through a relationship with CASIS (Center for Advancement of Science in Space), they are continuing to push the boundaries in golf by presenting their new driver reinforced by TeXtreme, Cobra King.

No comment yet.
Scooped by MaterialsReview
September 1, 2015 4:28 AM
Scoop.it!

COMPOSITES EUROPE 2015 just weeks away : CompositesWorld

COMPOSITES EUROPE 2015 just weeks away : CompositesWorld | Composites | Scoop.it
COMPOSITES EUROPE 2015, in Stuttgart, Germany, is just weeks away, Sept. 22–24. On its 10th anniversary, the trade fair is setting new records, including 450 exhibitors from 30 nations, exhibiting across three fair halls.

COMPOSITES EUROPE 2015 is also promoting new themes, program highlights and premiers. In addition to automation for serial production and new light construction concepts, the show will feature repair of fiber-reinforced plastic components, potential biologically-based materials and basalt fibers. In total, 11,000 composites professionsls are expected to attend the event, a third of whom are coming from overseas.

The COMPOSITES forum offers a lecture program consisting of exhibition proposals, as well as sessions dedicated to the themes, “Composite 4.0 at RWTH Aachen University: Innovative technologies, from fibre production to repair solutions” and “Composites in the application of wind energy.” It is free for visitors to the fair to take part in the forum.

In the Product Demonstration Area the exhibitors are Evonik Industries, the Institute for Aeroplane Construction from the University of Stuttgart, Euro-RTM-Group, RH Schneidtechnik and Piekenbrink Composites.

In the specialist area, “Industry meets Science” — being held for the second time after its successful premiere in 2014 under the management of the Institute of Plastic Processing (Institut für Kunststoffverarbeitung (IKV)) — the most recent developments and highlights from the domains of processing technologies, design, quality assurance and repairs are demonstrated.

Together with the Nova Institute, COMPOSITES EUROPE shows how good sustainability can exist in light construction. More than 20 businesses exhibit their products at the fair, ranging from plastic materials made from meadow grass through to flax fleece and reinforced volcanic rock filaments.

The Basalt Fiber Network demonstrates that basalt also offers numerous technological options for the composite industry. At one community stand, 28 businesses and research institutes from Germany emphasize the potential of basalt fibers. Special attention to the network lies in the development of textile technological processes, as well as in the research of composites and semifinished products.

The “1st International Composites Congress (ICC),” which takes place Sept. 21–22 in Stuttgart, replaces the previous AVK conference and in the future will be organised by the Composites Germany trade association as a prelude to the fair.

With the bio!CAR, COMPOSITES EUROPE offers a new conference (Sept. 24-25) for the automotive industry for the first time, with a focus on biological-based materials in automobile construction. The conference is organised by bioplasticsMAGAZINE in collaboration with Reed Exhibitions trade fair organisers, Nova Institute and AVK.
MaterialsReview's insight:

The HYBRID Expo, which takes place in parallel to COMPOSITES EUROPE, shows innovative hybrid construction solutions. The 70 international exhibitors include many branches from machine construction, tool construction, and research and development, as well as numerous suppliers of complete solutions, showing the entire process chain around the serial manufacture of hybrid components. Of particular focus at the fair are process integration and acceleration in the manufacture of metal-plastic compounds.

No comment yet.
Scooped by MaterialsReview
September 1, 2015 3:26 AM
Scoop.it!

PlastiComp Expands Hybrid Long Glass+Carbon Fiber Thermoplastic Composite Materials Line

PlastiComp Expands Hybrid Long Glass+Carbon Fiber Thermoplastic Composite Materials Line | Composites | Scoop.it
WINONA, MINN., USA – PlastiComp, Inc., a global leader in long fiber thermoplastic (LFT) materials and technologies, announced that it has commercialized its innovative Complet® Hybrid long glass+carbon fiber composites in two additional thermoplastic polymer matrices. Their hybrid products, which combine long glass fiber and long carbon fiber together in a single, affordable ready-to-mold composite pellet, are now available in polypropylene (PP) and engineered thermoplastic polyurethane (ETPU), last year they were initially introduced in nylon 6/6 (PA 6/6).

“PlastiComp’s hybrid long glass+carbon fiber products nicely fill the performance and price gap that exists between long glass fiber and long carbon fiber reinforced thermoplastic composites,” said Steve Bowen, president and CEO of PlastiComp. “Carbon fiber’s higher cost is the only real disadvantage preventing its wider use. By offering long glass and carbon fiber combinations we are able to significantly lower carbon fiber’s cost to entry barrier without compromising its high performance benefits.”
MaterialsReview's insight:

As a fully integrated long fiber compounder, PlastiComp provides product design and performance analysis assistance when converting applications to new materials as well as partnership opportunities during OEM new product development initiatives for which PlastiComp can customize their LFT materials to meet specific performance criteria

No comment yet.
Scooped by MaterialsReview
August 31, 2015 11:39 AM
Scoop.it!

Viks celebrates its second birthday with carbon fiber

Viks celebrates its second birthday with carbon fiber | Composites | Scoop.it

In 2013, Estonian designer Indrek Narusk introduced the Viks, a limited-edition stainless steel fixed-gear commuter bike. Now, to celebrate the line's second anniversary, he's rolled out a carbon fiber version.The Viks Carbon has the same frame design as its predecessor – it's essentially two side-by-side tubular frames, which are joined at the head tube, seat tube and bottom bracket. While its main tubes are indeed composed of carbon fiber (custom-made by Slovenia's Berk Composites), its joints and some other bits and pieces are still stainless steel.

MaterialsReview's insight:

As a result of the switch to carbon, the frame weighs 3 kg (6.6 lb) less than the steel version, with the complete bike tipping the scales at 10 kg (22 lb).

No comment yet.
Scooped by MaterialsReview
August 31, 2015 3:01 AM
Scoop.it!

Research delivers insight into the global aluminum composite panels market 2015 industry size and forecast 2020

Research delivers insight into the global aluminum composite panels market 2015 industry size and forecast 2020 | Composites | Scoop.it
Global Aluminum Composite Panels Industry is an in-depth report that offers a unique mix of specialist industry knowledge and the region-wise research expertise. The report delivers the market size and the trends for each sector.

The report on Global Aluminum Composite Panels market begins with an overview of the market. The report details the historical data of the Global Aluminum Composite Panels market along with the current scenario.
MaterialsReview's insight:

The key players’ market revenue, top strategies, innovations, collaborations, and other developments are mentioned in detail in the report. These insights about the top companies in the Global Aluminum Composite Panels market will let the user know about the market opportunities they can tap on to, with the best of tactical decisions.

No comment yet.
Scooped by MaterialsReview
August 28, 2015 5:06 AM
Scoop.it!

Automated preform process boosts properties while cutting cycle time

Automated preform process boosts properties while cutting cycle time | Composites | Scoop.it
Co-founder Thorsten Groene describes Cevotec’s work to ready FPP for broad commercial application. “We have improved the robotic arms to optimize their movement and cooperation. We are also using faster pick and place units with nominal 160 picks/min, which will speed up the placement process.” According to Groene, a new FPP line, operational in March 2016, will be capable of longer patches as well as using wider and thicker tapes. “Thickness influences both the process speed and the mechanical properties of the preform,” he notes. Higher performance parts will use thinner tapes, while the challenge for industrial and recreational product preforms will be balancing thickness vs. properties.
MaterialsReview's insight:

So what is possible? Groene says FPP can produce highly optimized preforms with 150% increased stiffness and up to 50% less scrap vs. continuous fabric preforms. For example, Cevotec has produced a CF snowboard reinforcement which achieves separately optimized bending and torsional properties as well as precise longitudinal loads with a zero material scrap during manufacturing.

No comment yet.
Scooped by MaterialsReview
August 27, 2015 6:19 AM
Scoop.it!

RWTH Aachen launches large-scale project for the repair of CRP-based series vehicles

RWTH Aachen launches large-scale project for the repair of CRP-based series vehicles | Composites | Scoop.it

At RWTH Aachen University and in close cooperation with seven research institutes and around fifty industrial companies, new technologies are being developed for identifying and assessing damage. The project also covers the customised production of repair materials – so-called patches – and the actual carrying out of the repair, including quality assurance.

The background behind this research initiative is that new vehicle concepts are opting increasingly for FRP and especially carbon-reinforced plastics (CRP), because these materials have not only lower weight but also very high stiffness and strength. Advances in the efficiency of the production plants and a reduction in cycle times have resulted in FRP also being increasingly used in the large-volume series production of vehicles. Furthermore, the pressure from legislators to reduce CO2 emissions means that lightweight construction materials such as composites are being deployed in ever more vehicles.

MaterialsReview's insight:

The project follows the Industry 4.0 principles: all elements involved in the creation of value must be designed so that they can be flexibly adapted to changing requirements and be linked in such a way that they can communicate with each other. Because of the new approach, completely new business models are generated, the development of which will also be examined.

No comment yet.
Scooped by MaterialsReview
August 26, 2015 3:15 AM
Scoop.it!

TRB Lightweight Structures Release Aerospace-Grade Lightweight Composite Panel

TRB Lightweight Structures Release Aerospace-Grade Lightweight Composite Panel | Composites | Scoop.it
According to the company, Cellite 840 tm panels are manufactured from woven glass with a phenolic resin and a nomex honeycomb core. Available with a full set of test data, they are typically available with short lead times in a wide range of thickness and size. The new design extends the range of TRB's lightweight composite flat panels which have a long history of use in rail and aerospace applications.
MaterialsReview's insight:

TRB Lightweight Structures have announced the release of an aerospace-­grade lightweight honeycomb composite panel designed for aerospace interior applications.

No comment yet.
Scooped by MaterialsReview
August 26, 2015 3:09 AM
Scoop.it!

Bayer MaterialScience Celebrate 50 Years of HDI Production in Leverkusen, Germany

Bayer MaterialScience Celebrate 50 Years of HDI Production in Leverkusen, Germany | Composites | Scoop.it
Bayer MaterialScience, which will operate under the new name Covestro from September 1, is celebrating a major anniversary, 50 years of hexamethylene diisocyanate (HDI) production in Leverkusen, Germany.
MaterialsReview's insight:

"As mobility increases, this calls for high-performance and durable coatings that are also environmentally friendly," said Daniel Meyer, Head of the Coatings, Adhesives, Specialties Business Unit at Bayer MaterialScience and Covestro. "Polyurethane coatings fulfill these requirements precisely and have established a firm place, particularly in glossy topcoats."

No comment yet.
Scooped by MaterialsReview
August 25, 2015 5:26 AM
Scoop.it!

Watch This Guy Make His Own Carbon Fibre Hydrofoil and Kiteboard

Watch This Guy Make His Own Carbon Fibre Hydrofoil and Kiteboard | Composites | Scoop.it
Watch this guys first attempt at making his own carbon fibre hydrofoil and board. From sanding, laminating and vacuuming the 6 min video jump cuts its way through the process with the final shots taken on the board itself.
No comment yet.
Scooped by MaterialsReview
August 25, 2015 3:09 AM
Scoop.it!

Carbon Fiber Poised to Become Mainstream in Near Future

Carbon Fiber Poised to Become Mainstream in Near Future | Composites | Scoop.it

“We’ve never had a 2,700-pound BMW since model year ’91,” said Jose Guerrero, i-brand product manager at the Bavarian automaker. This German luxury giant’s space-age i3 electric car is a featherweight by modern standards. A major contributor to this impressively modest weight is its carbon fiber reinforced plastic (CFRP) passenger compartment, one of the first in the world.

This firm’s i sub-brand is focused on building environmentally responsible transportation.

“People more and more are buying and purchasing products that align with their belief systems,” Guerrero said. “BMW i means sustainability.”

MaterialsReview's insight:

This plastic-reinforced fabric is a miracle material of the future, one that’s guaranteed to play a large role in the automotive industry. It’s already fairly prominent today, but usage will only increase going forward because its benefits are impossible to ignore.

No comment yet.