1. Synopsis/ Documents 2. Block diagram and circuit diagram with explanation. 3. Bill of material. 4. Components Specification list 5. Working principle of the project. 6. Datasheet of all components. 7. Program/code of Arduino with training. 8. Complete Working principle description. 9. Complete interfacing description. 10. you can get the project by courier. 11. viva preparation
A river cleaning robot is a specialized autonomous or remotely operated device designed to clean and maintain rivers and other water bodies. These robots are equipped with various technologies and features to remove debris, pollutants, and other environmental contaminants from the water. Here are some common features and technologies associated with river cleaning robots:
Sensors: River cleaning robots are equipped with a variety of sensors to detect and identify different types of pollutants and debris in the water. These sensors can include cameras, infrared sensors, and chemical sensors to analyze water quality.
Navigation Systems: Autonomous river cleaning robots use navigation systems such as GPS and advanced algorithms to navigate through the water and reach specific locations. This allows them to cover large areas efficiently.
Collection Mechanisms: River cleaning robots are equipped with mechanisms for collecting and removing debris from the water. This can include nets, scoops, conveyor belts, or other systems designed to capture and store pollutants.
Filtration Systems: Some robots incorporate filtration systems to remove smaller particles and pollutants from the water. These systems can include mesh filters or advanced filtration technologies to improve water quality.
Remote Operation: In addition to autonomous operation, some river cleaning robots can be remotely operated by human operators. This allows for more precise control in challenging or dynamic environments.
Energy Sources: River cleaning robots may be powered by rechargeable batteries, solar panels, or a combination of both. Using renewable energy sources helps reduce the environmental impact and allows for longer operational periods.
Communication Systems: River cleaning robots often have communication systems to send real-time data and status updates to a central control system or human operators. This enables monitoring of the robot's performance and facilitates timely decision-making.
Adaptability: The design of river cleaning robots may allow them to adapt to different river environments, including varying water depths, currents, and types of debris. This adaptability enhances their effectiveness in diverse conditions.
No branding, handmade look for students, and different styles as required by students.
๐๐ฏ๐ผ๐๐ ๐จ๐ : ๐ซ๐ถ๐๐ถ๐ฅ ๐ง๐ฒ๐ฐ๐ต๐ป๐ผ๐น๐ผ๐ด๐ถ๐ฒ๐โข is Indiaโs ๐Top rated & Leading R&D Company. It's an ISO 9001:2008 Certified Company & Govt Approved under MCA & it was Established in 2013.
๐จ๐ปโ๐ซ For Engineering Students ๐ฃ๐ต.๐. | ๐ .๐ง๐ฒ๐ฐ๐ต | ๐.๐ง๐ฒ๐ฐ๐ต | ๐ฆ๐ฐ๐ถ๐ฒ๐ป๐ฐ๐ฒ | ๐๐ผ๐ฏ๐ฏ๐๐ถ๐๐ All Branches โ CSE, IT, ECE, EE, ME, Civil, Bio, etc ๐ฉ๐ปโ๐ Students can build their own projects in our lab in one-day training with our experts.
This is one of my news digests. If you like my editorial choices, there are more to be found by clicking on the "dear reader" link, and on my name above. Enjoy !
Takeoff projects help students complete their academic projects. Register at takeoff projects today to find and learn about different interesting big data projects and grab the best jobs. Get started right now.
@robocreater DIY Smart RFID System using Arduino | Step-by-Step Robotics Project ๐ค๐ About this Video: In this video, I am unboxing and testing the RFID RC522 Sensor I recently ordered from Amazon! RFID technology is used everywhereโfrom office ID cards to metro gates. Today, I will show you how to interface this sensor with an Arduino to build a smart security system. Whether you are a beginner or a hobbyist, this project is a perfect way to learn about wireless identification and automation. ๐ What You Will Learn: โข Unboxing and pinout of the RC522 RFID Module. โข How to connect the RFID sensor to an Arduino Uno. โข How to read unique IDs from different RFID tags and cards. โข Building a basic Access Control System. ๐ ๏ธ Components Used: โข Arduino Uno โข RFID RC522 Module (Sensor + Tags) โข Jumper Wires โข Breadboard โข LEDs (for Status Indication) Donโt forget to: โ Subscribe for more DIY Robotics and STEM projects! โ Like the video if you found it helpful. โ Comment below if you have any questions about the code or wiring.
Top 5 Mind-Blowing Raspberry Pi Projects You Must Try in 2025!
Looking for the BEST Raspberry Pi projects to build in 2025? In this video, we explore 5 insane Raspberry Pi ideas that are perfect for makers, developers, electronics enthusiasts, and DIY tech lovers! Whether you're a beginner or an advanced creator, these Raspberry Pi projects will inspire your next innovation.
๐ก From AI-powered automation to smart home systems, these Raspberry Pi builds are practical, futuristic, and incredibly fun to create.
These Raspberry Pi ideas can help you:
- Improve coding skills - Build smart gadgets - Create automation systems - Learn IoT and AI - Start your own tech projects
Disclaimer: All the projects shown in this video belong to their original creators. เคนเคฎ เคเคจเคเฅ เคฌเคนเฅเคค เคเคญเคพเคฐเฅ เคนเฅเค เคเคฟ เคเคจเฅเคนเฅเคเคจเฅ เค เคชเคจเฅ projects เคนเคฎเคพเคฐเฅ เคธเคพเคฅ share เคเคฟเค เคฏเคพ เคนเคฎเฅเค เคเคธ video เคฎเฅเค include เคเคฐเคจเฅ เคเฅ permission เคฆเฅเฅค Please check out the full project videos of the respective creators belowโเคเคจเคเฅ เคเฅเคจเคฒ เคเฅ เคญเฅ เคเคฐเฅเคฐ support เคเคฐเฅเค! ๐
โก๏ธ Watch Next: "๐Arduino UNO Q Explained โ New Qualcommโs Game Changing Board! - https://youtu.be/4xSnmXcuoF0
๐ Tell us in the comments: Which Raspberry Pi project was your favorite? And what project should we build next?
๐ Donโt forget to LIKE, SHARE & SUBSCRIBE for more amazing Raspberry Pi tutorials, IoT projects, AI innovations, electronics DIY builds, Arduino ideas, ESP32 projects, and smart technology videos!
๐ Turn on notifications so you never miss future uploads!
Kati writes about making a Linux cyberdeck computer using a childrenโs toy, a VTech Lern und Musik Laptop, as a computer case. Every time I saw someone with one of those unnecessarily cute mini-laptops, I got extremely jealous. But most of them are a bit too expensive for something Iโd only use to flex. I [โฆ]
Did you know ESP32 already has a built-in temperature sensor? ๐ณ In this video, I showed how to read the internal temperature sensor of ESP32 and monitor the chip temperature in real time. This sensor is mainly used for: Thermal monitoring Overheating detection Power optimization Internal chip temperature analysis I also explained why the readings change when CPU load or WiFi usage increases ๐ฅ Next video โ OLED / IoT dashboard integration ๐
Are you about to shelve your project because your microcontroller ran out of pins? Stop right there! Discover how a simple port expander IC can save your circuit and give you massive I/O capacity in seconds. ๐
In this tech fundamental tutorial, we explore the power of port expanders. Learn how to gain 16 programmable input and output pins using just a serial communication protocol. We cover the straightforward setup: supplying power, connecting data and clock lines, and configuring reset and address pins. For those who want to push the boundaries, we even explain how to connect 8 ICs in parallel for a massive 128-pin setup. Engineering is about overcoming limits, not settling for them.
Don't forget to subscribe to the "Explorer Engineer" channel for more advanced engineering solutions and professional tech tutorials! ๐
In this project, I made a WiFi controlled robotic car using ESP8266, DC motors, and a motor driver module. The car can be controlled wirelessly through WiFi using a mobile phone. ๐คโก
If you like this project, donโt forget to Like ๐ Share ๐ค and Subscribe ๐ for more electronics and IoT projects. ๐ #ESP8266 #IoT #RobotCar #WiFiCar #DIYProject #Electronics #Arduino #EngineeringProject
Im zweiten Teil unseres Wetterballon-Projekts wird es technisch! Wir zeigen euch die Hardware-Komponenten, die wir fรผr unsere Sonde verwenden. Mit dabei sind der Raspberry Pi fรผr die Datenverarbeitung, Arduino fรผr die Sensorik vร die LoRa-Technologie fรผr die Fernรผbertragung der Telemetriedaten.
Verkabelung und Integration der Hardware.
Vorteile von LoRa fรผr die Funkรผbertragung in groรen Hรถhen.
Herausforderungen bei extremen Temperaturen in der Stratosphรคre.
Habt ihr selbst schon Projekte mit LoRa umgesetzt? Wir freuen uns auf eure technischen Tipps!
๐ Smart RGB Hourglass โ Next Level Arduino Project by HD Robotics Electronics!
In this project, I built a fully interactive RGB LED Hourglass using an ESP8266 D1 Mini, dual 8x8 WS2812B LED matrix panels, MPU6050 motion sensor, OLED display, buzzer, and a rechargeable 18650 battery system.
The LED particles move dynamically depending on the orientation of the device, creating a realistic gravity effect using the MPU6050 gyro sensor ๐
โจ Features: ๐น 1 / 2 / 3 / 5 / 10 minute timer modes ๐น Multiple melody & buzzer sounds ๐น OLED menu system ๐น Navigation with only 2 buttons ๐น Automatic RGB demo mode after 5 minutes standby ๐น Beautiful LED animations and effects ๐น Custom 3D printed PETG enclosure in white
The entire housing was designed and printed by myself, giving the project a clean and modern premium look ๐ค
More tutorials and project videos are coming soon on YouTube and my website! Search for HD Robotics Electronics on Google and check out all my other creations ๐ฅ
Learn how an LDR works in a simple way! An LDR changes its resistance based on light intensity: more light means lower resistance, and darkness means higher resistance. Perfect for beginners in electronics and electrical engineering. #LDR #LightDependentResistor #Electronics #ElectricalEngineering #Sensors #Arduino #CircuitBasics #EngineeringStudents #Shorts #LearnElectronics
Every time we buy a new sensor or module, the first question is always: โHow do I use this?โ ๐ญ So in this video, I shared some of the best websites for learning embedded systems, electronics, ESP32, STM32, Arduino, sensors, communication protocols, and real hardware projects ๐ Websites covered: Random Nerd Tutorials โ Best for ESP32 & IoT Last Minute Engineers โ Great for sensors & wiring guides DeepBlue Embedded โ Perfect for STM32 & advanced embedded systems These websites can save you hours of debugging and research ๐ฅ I also created a PDF with all useful links โ check the profile/link for it โก
๐ Este tutorial es con fines educativos. Tambiรฉn hay algunos enlaces de afiliado que ayudan al canal a seguir, que en ningรบn caso son malignos ni tienen ningรบn coste adicional. No se fomenta el uso ilegal de nada, si algo te gusta, cรณmpralo para dar tรบ apoyo. No nos hacemos responsables de su mal uso.
Aclarado quรฉ comprar en AliExpress: para lo minรบsculo, WIZ Studio; con pantalla y baterรญa, LilyGo; y para empezar, Wemos o Lolin (C3 Mini o S2 Mini). #ESP32 #Arduino #DIYelectronics #Microcontrollers
La Blue Pill STM32F103C8T6 corre a setenta y dos megahertz con arquitectura ARM Cortex-M3 de treinta y dos bits, tiene veinte kilobytes de RAM contra los dos del Arduino Uno, diecisรฉis canales ADC de doce bits, tres UART, dos SPI, dos I2C y CAN bus. Todo eso por dos dรณlares cuando un Arduino Uno oficial cuesta veinte. El problema es que no trae programador incluido, necesitas un ST-Link V2 externo, y si no aprendes a configurar sus registros correctamente no hace absolutamente nada. No es para principiantes, es para quienes ya dominaron el Arduino y quieren subir de nivel en sistemas embebidos reales. โก #electronica #STM32 #BluePill #ingenieria #embebidos
Arduino Speedometer ๐ณ๐ฅ | Real Time Digital Speed Meter | Robomaa Automations I Made a Digital Speedometer using Arduino ๐คฏโก Smart Speedometer Project ๐๐ฅ | Arduino Engineering Project DIY Arduino Speed Meter ๐ณ | Future Dashboard Project Engineering Students Made This Smart Speedometer ๐โก๐ค Welcome to Robomaa Automations!
๐ Arduino Based Digital Speedometer Project โก
Is smart engineering project me maine ek real-time speedometer banaya hai jo speed ko accurately display karta hai ๐ณ๐ฅ
๐ง Features: โ Real Time Speed Detection โ Digital Display Output โ Smart Arduino System โ Smooth Working Mechanism
Are you an Electronics Engineering student or a tech enthusiast looking to start your journey into the world of microcontrollers? This video is the perfect starting point for you! In this video, we break down everything you need to know about Arduino from an engineer's perspective. We skip the fluff and dive straight into the hardware and potential of this amazing open-source platform. What we cover in this video: What is Arduino? โ Understanding the core concept. The Hardware: A detailed look at the ATmega328P microcontroller. Technical Specs: Breaking down Digital I/O, Analog Pins, and Voltage requirements. Real-world Applications: From simple LED blinking to complex Robotics and IoT systems.
Hey guy's R4GE VipeRzZ here, and today I'm going to show you how you can setup on home VPN using a Raspberry Pi. This will allow you to make it seem like you are at home no matter where you are using the internet from in the world.
- If want to set static IP not using DHCP. Recommend that you set static IP using DHCP. sudo nano /etc/dhcpcd.conf interface eth0 static ip_address=192.168.1.10/24 static routers=192.168.1.1 static domain_name_servers=192.168.1.1 sudo reboot
- If you want to use IPV6 net.ipv4.ip_forward = 1 net.ipv6.conf.all.forwarding = 1
- If you donโt want to use IPV6 net.ipv4.ip_forward = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1
- Allow traffic forwarding (Added for backup not needed) sudo apt install iptables-persistent -y sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE sudo netfilter-persistent save
- Install & bring up Tailscale curl -fsSL https://tailscale.com/install.sh | sh sudo tailscale up --advertise-exit-node --accept-dns=false --snat-subnet-routes=true โ-reset
This video demonstrates my Smart RFID Parking System developed using a Raspberry Pi. The project uses RFID technology to control access, ultrasonic sensors to detect cars entering and exiting, and a servo motor to control the gate. The system also includes a Flask web dashboard that displays real-time parking information, gate status, access results, and camera images. The project is fully automated and starts automatically when powered on.
To get content containing either thought or leadership enter:
To get content containing both thought and leadership enter:
To get content containing the expression thought leadership enter:
You can enter several keywords and you can refine them whenever you want. Our suggestion engine uses more signals but entering a few keywords here will rapidly give you great content to curate.
Scoop.it!
Your new post is loading...
