 Your new post is loading...
España cerró 2024 con una generación renovable de 148.999 GWh (un 10,3% más que en el año anterior), que suponen el 56,8% del total del mix. Estos datos anuales, que son los mejores registrados por Red Eléctrica hasta la fecha, exhiben el alto grado de avance de la transición ecológica en nuestro país. El impulso de la potencia instalada de generación renovable, así como unas condiciones meteorológicas favorables durante 2024, permitieron que la hidráulica aumentase su producción un 35,5% respecto a 2023 y que la solar fotovoltaica creciera un 18,9%, hasta sobrepasar su récord por sexto año consecutivo. Estos son algunos de los datos extraídos del Informe del sistema eléctrico español 2024 y Las renovables en el sistema eléctrico español 2024, dos documentos de Red Eléctrica, empresa de Redeia responsable del transporte y la operación del sistema eléctrico, que analizan el comportamiento del sistema eléctrico durante el pasado ejercicio. Con este impulso de las renovable, las emisiones de CO2 equivalente derivadas de la producción eléctrica han registrado en este 2024 su mínimo histórico: 27 millones de tCO2 equivalente, lo que supone un descenso del 16,8% respecto al ejercicio anterior. En términos globales, el 76,8% de toda la energía española generada en 2024 fue libre de emisiones.
The data reported by EU Member States by the deadline of 31 March 2025 show a 5% reduction in emissions in 2024, compared to 2023 levels from the reporting stationary installations and aircraft operators. With this development, ETS emissions are now around 50% below 2005 levels and on track to achieve the 2030 target of -62%. The observed trend confirms the effectiveness and efficiency of the EU’s cap and trade system as an important policy instrument for the decarbonisation of the European economy. The most important driver for the decrease in EU ETS emissions has been the power sector, with emissions from electricity production having been reduced by 12% below 2023 levels. This reduction is due to an increase in electricity production from renewables by 8% and nuclear by 5%, coupled with a decrease in gas by 8% and coal by 15%. The main drivers of the increased electricity production from renewables have been solar (by an impressive 19%) and hydropower. Wind-generated power remained steady in spite of less favourable weather conditions in certain periods of the year. The total production of electricity also remained consistent, with levels similar to 2023.
Electricity transmission system operators 50Hertz and TenneT have presented the Green Grid Compass together with the FfE (Forschungsstelle für Energiewirtschaft e. V.). The digital tool can be found on www.greengrid-compass.eu and provides data on CO₂ intensity and on the share of renewable energy in the individual European electricity bidding zones. It is based on the already existing tools eCO₂grid (50Hertz) and the CO₂ Monitor (TenneT), which were harmonised through joint development. The methodology, tested by TÜV SÜD, creates transparency and offers users past, real-time and day-ahead information on greenhouse gases. The Green Grid Compass addresses key energy transition challenges and supports the implementation of EU regulations such as the Renewable Energy Directive (RED III), which requires the hourly specification of the share of renewable energy and the CO2 intensity in the market area in question. Furthermore, the tool provides an answer to the increasing sustainability requirements and helps companies to efficiently organise their contribution to net zero.
The new report outlines a potential framework for the Environmental Footprint database. The database should provide background datasets for life cycle assessment studies. Life cycle assessment is a scientific method to analyse the environmental performance of products in a quantifiable way. The environmental footprint (EF) methods is a European standard, which provides detailed instructions on how to calculate the environmental impacts of for example products. Available, high-quality background datasets accelerate these calculations and make the results reliable. Building on these foundations, this final study outlines the proposed framework for the development and management of a publicly available Environmental Footprint database. It includes the general concept including roles and responsibilities of the different actors, the IT architecture and the IT tools needed to facilitate the creation, verification and updating of the datasets.
El Centro Común de Investigación (JRC, Joint Research Centre) de la Comisión Europea ha publicado un informe sobre las estrategias de economía circular para la electricidad renovable en la Unión Europea. El estudio demuestra que los volúmenes futuros de residuos derivados de la generación de electricidad solar y eólica en la UE son complejos y que se generarán en cantidades mucho mayores en el futuro. Además, cuantifica la huella de residuos del desmantelamiento de plantas eléctricas que utilizan combustibles fósiles.
Copper is one of the most crucial minerals needed to drive the clean energy transition, and a faster transition could push copper demand beyond current production capacity. One way to overcome this challenge is by recycling. Copper is needed for all renewable energy technologies, including wind, solar and energy storage, as well as the grid infrastructure required to integrate it all.
With the signing of a new Letter of Intent, TenneT and Siemens Energy are marking a radical change in energy’s purchasing world with the collaborative decarbonization of the supply chain for grid infrastructure. The goal is to reduce emissions by 30 percent by 2030, starting with the use of recycled copper in power transformers.
Europe has rightly recognized that electricity grids have a crucial role in decarbonising its economy, in achieving energy independence, and driving competitiveness. CurrENT is now calling for urgent action on the deployment of innovative grid technologies to unleash the full potential of Europe’s electricity grid at the lowest cost to consumers. Innovative grid technologies include grid-enhancing technologies that get more out of the existing grid, technologies that enable operation of a power system with a high penetration of renewables, and high-capacity conductors that offer up to ten times the transfer capacity of traditional conductors and significantly reduce network losses.
La Comisión Nacional de los Mercados y la Competencia (CNMC) publica el calendario de las Circulares de carácter normativo en materia de energía cuya tramitación tiene previsto iniciar en 2025. Entre ellas se incluyen propuestas relativas al establecimiento de parámetros económicos ligados a la retribución de las redes de transporte y distribución eléctrica y, en su caso, revisión de valores unitarios de la Circular 7/2019; así como sobre la metodología y condiciones del acceso y de la conexión a las redes de transporte y distribución de las instalaciones de producción de energía eléctrica (modificación de la Circular 1/2021). El calendario incluye la descripción y los objetivos que se pretenden alcanzar en cada una de las circulares, así como las fechas previstas en que se producirá el trámite de audiencia de la norma y su correspondiente adopción.
Beginning in the 2000s and continuing into the 2010s, the utility industry invested billions of dollars in Advanced Metering Infrastructure (AMI) 1.0. This significant shift, driven by advancements in technology and a focus on sustainability, revolutionised the meter reading industry and paved the way for new use cases aimed at improving ageing grid infrastructure and achieving cost savings.
Argonne researchers are using artificial intelligence to speed up the day-ahead electricity market clearing and real-time operations. The electricity market clearing and grid operations rely on the security constrained unit commitment, or SCUC, which helps grid operators set a schedule for daily and hourly power generation. As the SCUC problem is solved multiple times a day, data accumulates that can be used to discover patterns applicable to solving the next round of problems. To that end, Argonne researchers have developed AI that now can solve a SCUC about 12 times faster than conventional methods.
To maximize the efficiency of energy production and distribution, smart grid technology uses a spectrum of renewable energy control techniques. These different components are designed to handle the unpredictable nature of renewable resources, ensuring a stable and robust energy supply. From sophisticated algorithms to advanced forecasting models, control techniques continue to evolve, adapting to the growing complexity of the modern grid.
Hitachi has announced an order for five units of Hitachi Energy’s sulfur hexafluoride (SF6)-free EconiQ™ 300 kV circuit-breaker from Chubu Electric Power Grid. This is the first project in Japan where SF6-free circuit-breakers will be installed at voltages of 275 kV and above. It marks a milestone in achieving sustainable power grids in Japan and Chubu Electric Power Grid’s ambition of reducing emissions to zero by 2050. The SF6-free EconiQ circuit-breaker reduces CO2-equivalent emissions from the insulating gas by 99.3%.
|
Redeia publica su 21º Informe de Sostenibilidad, donde hace balance del cumplimiento de su Compromiso con la Sostenibilidad 2030 y de su Plan de Sostenibilidad 2023-2025, del que ya ha alcanzado el 79,9% de los objetivos. Entre los avances realizados en el último año, destacan las acciones para minimizar o mitigar los efectos del cambio climático, como la reducción del 34% de las emisiones de alcance 1 y 2 respecto a 2019 y la compensación del 100% de sus emisiones de alcance 1. A su vez, ha logrado su objetivo de cero residuos a vertedero en Red Eléctrica y ha reciclado, regenerado o valorizado el 94,3% del total de los residuos del grupo.
The European Commission has adopted the 2025-2030 working plan for the Ecodesign for Sustainable Products Regulation (ESPR) and Energy Labelling Regulation. The plan provides a list of products that should be prioritised to introduce ecodesign requirements and energy labelling over the next five years. This will foster sustainable, repairable, circular and energy efficient products across Europe, in line with the Clean Industrial Deal and the Competitiveness Compass. The priority products for ecodesign and energy labelling requirements are steel and aluminium, textiles, furniture, tyres and mattresses. In addition, the Commission will introduce horizontal measures to requirements on repairability for products such as consumer electronics and small household appliances. This will include the introduction of a repairability score for products with the most potential, and requirements on recyclability of electrical and electronic equipment.
La Asociación Española de Normalización, UNE, representante nacional de ISO, ha liderado la traducción al español de la versión oficial del estándar global que ayudará a las organizaciones a implementar un marco ESG (ambiental, social y de gobernanza). Se incorpora al catálogo nacional de estándares como UNE-ISO IWA 48 Implementación de principios ambientales, sociales y de gobernanza (ESG) para facilitar su aplicación homogénea en un mercado de más de 600 millones de hispanohablantes.
El Reglamento Europeo de Taxonomía (Reglamento UE 2020/852), establece un marco normativo que permite identificar actividades económicas ambientalmente sostenibles. Su objetivo principal, es proporcionar claridad a los inversores, facilitando el redireccionamiento de capital hacia proyectos sostenibles, garantizando la transparencia en la inversión, alineando así los objetivos económicos con compromisos climáticos europeos clave, como alcanzar la neutralidad climática para 2050. Este enfoque unificado es fundamental para canalizar los esfuerzos financieros hacia sectores clave que desempeñan un papel estratégico en la transición hacia un modelo económico sostenible. El Reglamento se basa en dos pilares fundamentales: los objetivos ambientales y los criterios técnicos de evaluación. Estos criterios, deben ser cumplidos por todas las actividades económicas incluidas en el Reglamento, para calificarse como ambientalmente sostenibles.
La empresa de tecnología climática Electricity Maps, con sede en Copenhague, ha creado una herramienta que indica la procedencia de la energía que se consume en cada momento y lugar, así como su impacto en el mediomabiente. Su intención es facilitar el equilibrio entre la oferta y las crecientes necesidades de electricidad de manera que el consumo de electricidad puede desplazarse a momentos en los que la energía limpia está fácilmente disponible y los precios son más bajos, a la vez que se impulsa la descarbonización.
In the context of supply chain constraints and increasing competitiveness over materials, circularity can help address these challenges, while avoiding and minimising environmental and social footprints from grid deployment. RGI's Wired for Circularity factsheet showcases why and how grid operators can implement circular approaches throughout the power grids' supply chain.
Distribution system operators (DSOs) play a crucial role in the global transition by facilitating electrification, thereby enabling homes, industries and transport to reduce their greenhouse gas (GHG) emissions. DSOs also contribute by actively committing to environmental targets and reducing their own greenhouse gas emissions. Moreover, the recent update to the Corporate Sustainability Reporting Directive (CSRD) has mandated new transparency standards on company reporting, particularly concerning carbon footprints. This report analyses various DSO carbon footprints, highlighting their main emission sources from direct and indirect emissions. While the relative impact of emission sources may vary between DSOs across Europe, generally the indirect emissions in scopes 2 and 3 constitute the largest share of the emissions, mainly linked to grid components and electrical losses. The report showed that for the average DSO, the relative scope 1 emissions are 4%, scope 2 are 43% and scope 3 are 54%. The data represents DSOs which connect to 106 million customers, which translates to 40% of the customers in the EU.
T&D Europe, ENTSO-E, EU DSO Entity and Europacable have released a joint statement highlighting their collaborative efforts to strengthen the European manufacturing base. A central pillar of this collaboration is the commitment to jointly deliver the European grid infrastructure of today and tomorrow, enabling European citizens and companies to access clean, affordable, and sovereign energy. This effort is underpinned by greater flexibility, efficiency, and innovation across the entire European value chain to support grid infrastructure projects. Over the coming months, the four parties will assess the potential benefits of possible common practices on asset testing and qualification specifications, increased investment visibility, and collaboration in contributing to the planned revision of the EU’s procurement rules. These efforts will lead to the development of a roadmap focused on assessing common technical approaches, contributing to the revision of EU’s public procurement rules, and continuing support for international standards and skilled workforce development.
New patents to integrate artificial intelligence into power grids have grown sixfold in recent years, with the United States and China leading the way in AI for smart grid development, according to a new study by the European Patent Office (EPO) and the International Energy Agency (IEA).
CanmetENERGY in Varennes, Quebec, conducts applied research aiming to facilitate the integration of renewable DERs to the electric grid and net-zero energy buildings in partnership with industry, university and utilities. To perform this work, the centre uses numerous test benches and tools.
Driven by regulatory pressures, such as the EU’s F-gas regulation, and the growing demand for sustainable solutions, the power sector is shifting toward SF6-free switchgear. This strategic transition is especially relevant for the GCC region, where ambitious sustainability initiatives like Saudi Arabia’s Vision 2030 aim to cut carbon emissions and significantly expand renewable energy capacity. Transitioning to SF6-free switchgear is not only about regulatory compliance—it represents a critical investment in the future of power grids.
Smart grid solutions powered by AI implementation have revolutionized energy management. In exploring case studies, success stories demonstrating why AI-driven smart grid projects are thriving are examined.
|