In der Session „Technologien“ auf dem Leichtbau-Gipfel 2015 in Würzburg, widmeten sich Referenten von EDAG, Brose und Polytec unter anderem der Simulation und der FE-Modellvalidierung.
Saint-Jérôme, March 24, 2015 – The Composites Development Centre of Quebec (CDCQ) is proud to announce the achievement of the ISO 17025 accreditation, an international recognition of competence. Issued March 2, 2015, this accreditation demonstrates that tests conducted by its specialists are performed in a highly controlled, secure environment, in accordance with the the Standards Council of Canada (SCC) protocols, in partnership with the Bureau de normalisation du Québec (BNQ).
Aquarius Fibreglas has developed a fully infused boat hull, claiming it is the first of its kind in India. Featuring a DIAB sandwich core, the vessel is a 15.65 metre Fast Interceptor Boat. Composites Consulting Group (CCG), an independent DIAB Group company, says it offered Aquarius a full first onsite build to ensure the full value of composite design was realised.
Scott Bader has recently become an approved composites materials supplier of moulding and structural adhesive products to all production facilities around the world which make up the Daimler AG Group of manufacturing companies: Mercedes-Benz Cars, Daimler Trucks, Mercedes-Benz Vans, and Daimler Buses.
Thermoplastics specialist Solvay (Brussels, Belgium) and core specialist 3A Composites (Sins, Switzerland) announced at JEC Europe a collaborative effort to develop and manufacture light-weighting specialty foam and sandwich materials for the advanced transportation market.
Conceived as a showcase for large-scale additive manufacturing capabilities developed through a public/private partnership anchored by Oak Ridge National Laboratory (ORNL, Oak Ridge, TN), the passenger cell or tub (seat frames, cockpit, hood and tail) and four fenders — five pieces total — for the 680-kg, battery-powered two-seaterStrati were printed in 44 hours. The car subsequently was assembled in two days and driven off the IMTS Emerging Technology Exhibit stand before show’s end to cheers from the crowded exhibit floor.
Aus einer PLA-Variante entstehen auf einem 3D-Drucker Interieurteile für Prototypen neuer Fahrzeuge. Bei Automobil-Konstrukteur Thomas Pazulla kommen entstehen Prototypen häufig im 3D-Drucker.
Key among the attributes that make it so attractive is its excellent strength-to-weight ratio, biocompatibility, corrosion resistance, and its extensive temperature range and low thermal expansion coefficients. But these attributes also make conventional processing methods challenging. For example it can take up to 10 to 100 times longer to shape components made from titanium than those made from aluminium alloys. In addition, production technologies that use mechanical abrasion result in high levels of waste titanium material. Production methods for processing titanium therefore have to be fast and minimise waste to be considered economical.
Im Fokus des Auftritts der Lanxess AG, Köln, auf der heute beginnenden VDI-Tagung „Kunststoffe im Automobilbau“ stehen die vielfältigen Möglichkeiten, die Konstruktionen auf Basis der endlosfaserverstärkten Thermoplast-Composites der Marke Tepex ... Mehr >
Las Vegas is a city of few winners and lots of ... let's say "not winners." But when the Specialty Equipment Market Association was in town for the 2014 SEMA Show, QA1 was a two-time winner. The new carbon-fiber driveshaft from QA1 won not one but two SEMA Global Media Awards—one for their new Mopar rear suspension conversion system and one for the new carbon-fiber driveshaft, seen here.
Strong demand for high speed boats is expected to drive the global marine composites market over the next six years. Cruise ships, speed boats, sail boats, and power boats manufacturing are the major marine composites applications. Power boat production was the most dominant application in 2013. Carbon fiber composites, glass fiber composites and foam core materials are the key marine composites products. Carbon fiber is presumed to witness rapid growth owing to high demand over the forecast pe ...
With full-rate production in 2017, FACC will deliver four shipments/week of composite fan track liners, rear case liners, bifurcation linings and anti-fluid panels used on Airbus A350 XWB powerplants.
FACC (Ried im Innrkreis) is responsible for development and production of the engine composites as part of a life-of-program contract for the new Trent XWB engine – a fuel efficient power system that entered service at the end of 2014, following delivery of the first Airbus A350 XWB to launch customer Qatar Airways.
Carbon fiber is an amazing material. even 40 years after it was first invented. Despite all the other wonder materials that modern technology has developed, carbon fiber is still the king and still the most widely used composite in aerospace.
Evaluating technological developments that will soon allow Carbon Fiber Composites to go beyond their current commercial use in high-end or premium sports vehicles and into the mainstream.
Im Karlsruher Innovationscluster Technologien für den hybriden Leichtbau KITe hyLITE arbeiten drei Fraunhofer-Institute sowie die Universität Karlsruhe (CART – Center of Automotive Research) und Unternehmen der Automobil- und Zulieferindustrie eng zusammen.
Fibers used to reinforce composites are supplied directly by fiber manufacturers and indirectly by converters in a number of different forms, which vary depending on the application. Here's a guide to what's available.
Fibers used to reinforce composites are supplied directly by fiber manufacturers and indirectly by converters in a number of different forms, which vary depending on the application.
Brilliant ideas need brilliant materials. Designed to overcome the strength limitations of traditional 3D printed materials, the revolutionary Mark One 3D pr...
I love Paris in the springtime. A time full of hope, a time full of change. A time when the graffiti strewn sidings on the way into the Gard Du Nord train station act as signposts guiding the Eurostar passengers towards the one true show that finds and binds the international composites manufacturing community: JEC Europe.
specifications for the prototype of the aircraft will be revealed in three to four months," revealed G. Ashok Kumar, joint secretary for civil aviation, on the sidelines of India Aviation 2014 on Friday.Unlike the defence projects, he said the government would partner with private sector companies on this venture, including the Tatas and the Mahindras, for the project.
Built in East Germany, the Trabant 601 was notorious for its many faults – not the least of which was a body made out of Duroplast, a hard plastic made of cotton waste and phenol resins that led those in the West to describe the car as being made of cardboard. However, it now looks as if the Trabant is getting the last laugh as scientists look at ways of making cars out of cotton and other botanical fibers formed into a new class of hybrid composites.
New emission, safety, and mileage standards in Europe and North America call for vehicles that are ever stronger and lighter, which means that steel and aluminum are giving way to carbon composite materials. Basically, such carbon fiber-reinforced plastics (CFRP) are made up of carbon fibers reinforced by resins, which provides strength and durability, and by tweaking the materials put in, engineers can alter the composite to fit particular applications.
These composites are light, strong, durable, and have proven their worth in everything from F1 racers to aircraft to surgical prostheses, but using them is a trade off. High-tech synthetic carbon composites may be marvelous materials, but they're also expensive and difficult to fabricate. Alternatives, such as glass fiber, can bring down the cost, but they tend to be heavier and not quite as strong.
To get content containing either thought or leadership enter:
To get content containing both thought and leadership enter:
To get content containing the expression thought leadership enter:
You can enter several keywords and you can refine them whenever you want. Our suggestion engine uses more signals but entering a few keywords here will rapidly give you great content to curate.