Aluminum
4.5K views | +18 today
Your new post is loading...
Scooped by MaterialsReview
November 2, 2015 2:31 AM
Scoop.it!

Century Aluminum posts $56.1M loss

Century Aluminum posts $56.1M loss | Aluminum | Scoop.it
Century Aluminum Co. on Thursday reported a steep loss as cheap exports from China have depressed worldwide prices, yet the company vowed to continue efforts to keep its Berkeley County smelter open beyond a Dec. 31 contract deadline with its electricity provider.

“We are far, far from ready to even begin giving up,” Michael Bless, Century’s president and CEO said of the Mount Holly plant during a conference call with analysts.

Bless called it “unacceptable” for Moncks Corner-based utility Santee Cooper to reject a deal to bring electricity to the 600-worker site and “a real tragedy” if a solution cannot be found.

“We will fight during the next two months for the future of this excellent plant and the people who depend on it,” he said, adding that the modern and efficient Mount Holly plant “should always be the last man standing in the U.S.”

Santee Cooper has said it cannot accept Century’s proposal because it would increase costs for other customers. The smelter is one of the largest manufacturing employers in the county.

Century wants the state-owned utility to let an unidentified third-party power provider use the utility’s transmission lines to bring electricity to the Mount Holly site. Century has said it would pay Santee Cooper about $13 million for the use of its lines, but the power company has said the proposal would be illegal under current federal regulations.

The company announced last week that it will close the Mount Holly smelter at the end of the year if a deal can’t be reached over the next few weeks.

Gov. Nikki Haley said Wednesday that state officials “pushed as hard as we could” to strike a deal with Century but can’t “choose one business over another or do special favors for anyone.”

While Century Aluminum accounts for about 8.8 percent of Santee Cooper’s annual electric revenues, or roughly $175 million, Santee Cooper says that money simply covers what it costs to serve the aluminum provider through a combination of power generation and electricity purchases from a third party.

Bless said Thursday that Mount Holly “has, over time, had the highest power cost of any U.S. smelter and this situation persists today, by a good margin.”

Century’s quarterly loss of $56.1 million, or 65 cents a share, was more than double what Wall Street analysts were expecting. It compares with a $50.4 million gain a year earlier.

Bless blamed cheap, government-subsidized exports from China for weakening aluminum prices, which hit a six-year low last week on the London Metal Exchange.

“This behavior has caused a meaningful deterioration in the operation of orderly global markets,” Bless said. “We are working actively with the industry and the U.S. government to address this situation, which must be rectified.”

Century Aluminum recently has idled or cut production at other smelters, closing its Ravenswood, W.Va., facility and reducing output at its Hawesville, Ky., plant to 40 percent of capacity.

Sales for the third quarter of 2015 were $454.5 million compared with $500.6 million for the same period a year earlier.

Century’s loss for the first nine months of the year was $16.2 million.

The company’s stock closed at $4.29 Thursday, up 15 cents from the previous trading session but well below its 52-week high of $31.75.

Century had been a minority partner in the Mount Holly plant until acquiring Alcoa’s 50.3 percent interest in December.

Reach David Wren at (843) 937-5550 or on Twitter at @David_Wren_
MaterialsReview's insight:

Century wants the state-owned utility to let an unidentified third-party power provider use the utility’s transmission lines to bring electricity to the Mount Holly site. Century has said it would pay Santee Cooper about $13 million for the use of its lines, but the power company has said the proposal would be illegal under current federal regulations.

No comment yet.
Scooped by MaterialsReview
October 27, 2015 8:06 AM
Scoop.it!

Logan Aluminum announces groundbreaking

Logan Aluminum announces groundbreaking | Aluminum | Scoop.it
Logan Aluminum’s long talked about expansion project will likely be unveiled this week.

Logan County’s largest employer announced Monday morning that it would hold a ground breaking ceremony for an expansion project on Wednesday at 1 p.m.

No further details were announced, but in March the Kentucky Economic Development Finance Authority gave preliminary approval to Logan Aluminum for incentives regarding an expansion project.

The preliminary approval is for a proposed $282 million expansion project for the north Logan industry, which is the county’s largest employer and among the biggest in the region.

According to the proposal, Logan Aluminum would create 188 jobs that could pay an average of $50 per hour including benefits.

The purpose for the potential expansion would be to make flat-rolled aluminum sheets for the automobile industry. Some $70 million would be spent on building improvements and $212 million would be used for equipment purchases.

The incentives that Logan Aluminum could see includes a $1.8 million rebate in sales tax on some $40 million that could be spent on materials and a $5.2 million tax incentive over 10 years for the jobs created by the project.

Logan Aluminum is a Delaware registered corporation. We are a joint venture with two shareholders; Novelis Corporation and Tri-Arrows Aluminum Corporation. Physically located near Russellville, Logan Aluminum is a leading manufacturer of flat rolled aluminum sheet, primarily for use in the beverage can market. At Logan Aluminum, we use the latest technology, but it is the commitment of ‘every individual, every team, every day’ to improve and advance in concert with our unique team-based work system that has propelled us to a leadership position in the industry.
MaterialsReview's insight:

Ceremony will be for new expansion project, no other details released


The preliminary approval is for a proposed $282 million expansion project for the north Logan industry, which is the county’s largest employer and among the biggest in the region.

According to the proposal, Logan Aluminum would create 188 jobs that could pay an average of $50 per hour including benefits.

No comment yet.
Scooped by MaterialsReview
October 27, 2015 7:39 AM
Scoop.it!

Aluminium pack recycling records best ever performance

Aluminium pack recycling records best ever performance | Aluminum | Scoop.it
The Q3 results are the direct result of adjustments made to the accreditation process, following lower than expected tonnages in Q1 and Q2, and increasing volumes of aluminium packaging recovered from incinerator bottom ash (IBA) being reported through the system.

An estimated 18,800 tonnes is required in the final quarter to achieve the 2015 recycling target.

Rick Hindley, executive director of the Aluminium Packaging Recycling Organisation (Alupro) said: “Alupro has consistently advocated streamlining the reprocessor/exporter accreditation process and these changes have had an immediate effect. With more reprocessors coming on stream we are increasingly confident that aluminium will not only achieve the 2015 recycling target, but also that in future the figures will be a more accurate picture of the amount of aluminium packaging recycled in the UK or exported for recycling. We are very pleased to see that new reprocessors are becoming accredited to the system and are grateful to Defra and the national environment agencies for working to bring about these changes.

“We knew that 2015 would be a period of adjustment following changes to the aluminium protocols which came into effect in January. This is the first set of data since further revisions were introduced to the protocol which allows PRNs to be issued on 70% of the non-ferrous material recovered from incinerator bottom ash. We are increasingly confident that the 2015 recycling target will now be met.”
MaterialsReview's insight:

“We knew that 2015 would be a period of adjustment following changes to the aluminium protocols which came into effect in January. This is the first set of data since further revisions were introduced to the protocol which allows PRNs to be issued on 70% of the non-ferrous material recovered from incinerator bottom ash. We are increasingly confident that the 2015 recycling target will now be met.”

No comment yet.
Scooped by MaterialsReview
October 27, 2015 3:39 AM
Scoop.it!

US aluminum producers say Chinese firm evading import duties

US aluminum producers say Chinese firm evading import duties | Aluminum | Scoop.it
An industry body representing the U.S aluminum sector has accused China’s Zhongwang Holdings, the world's second largest aluminum extrusion producer, of systematically and illegally evading import duties.

In a petition filed with the U.S. Commerce Department late last week, the Aluminum Extruders Council (AEC) alleges that the Hong Kong-listed producer has avoided payments by cutting and welding its aluminum extrusions into slabs so they would be classified as pallets — which are not subject to the same duties.

Extrusion is the process of shaping aluminum, used in the construction, transport, and automotive sectors, by forcing the metal to flow through an opening in a die.


The complaint comes at a rough time for producers of the lightweight metal worldwide, as prices have touched the lowest in six years, due to a global surplus.

The U.S. Department of Commerce has 45 days from the date of filing to decide whether it will launch an investigation, AEC said in a statement.

"We always export products under trade rules," the company said Monday, according to Chinese business paper The Standard. It added that products sent to the U.S. "are deep-processed ones excluded from anti-dumping and anti-subsidy rules."

Currently, China accounts for about half of the world’s aluminum supply thanks to cheap power and the world’s most efficiently built smelters. Established producers from North America to Russia and the Middle East are anxious about the Asian giant’s increasing influence, but do not want to cut capacity for fear of losing market share.

The filing is considered the first formal move to curb China's aluminum exports.

MaterialsReview's insight:

The complaint comes at a rough time for producers of the lightweight metal worldwide, as prices have touched the lowest in six years, due to a global surplus

No comment yet.
Scooped by MaterialsReview
October 26, 2015 4:19 AM
Scoop.it!

Packaging Recovery Data Shows Improvement For Aluminium

Packaging Recovery Data Shows Improvement For Aluminium | Aluminum | Scoop.it
Packaging waste recovery data for the third quarter of 2015 shows that reported aluminium packaging recycling has recorded its highest ever quarterly performance at 23,330 tonnes, according to figures released by the Environment Agency.

According to the Aluminium Packaging Recycling Organisation (Alupro), the Q3 figures are the direct result of adjustments made to the accreditation process, following lower than expected tonnages in Q1 and Q2, and increasing volumes of aluminium packaging recovered from incinerator bottom ash (IBA) being reported through the system.


An estimated 18,800 tonnes is required in the final quarter to achieve the 2015 recycling target.


Rick Hindley, executive director of Alupro said: “Alupro has consistently advocated streamlining the reprocessor/exporter accreditation process and these changes have had an immediate effect.


“With more reprocessors coming on stream we are increasingly confident that aluminium will not only achieve the 2015 recycling target, but also that in future the figures will be a more accurate picture of the amount of aluminium packaging recycled in the UK or exported for recycling.


“We are very pleased to see that new reprocessors are becoming accredited to the system and are grateful to Defra and the national environment agencies for working to bring about these changes.

“We knew that 2015 would be a period of adjustment following changes to the aluminium protocols which came into effect in January. This is the first set of data since further revisions were introduced to the protocol, which allows PRNs to be issued on 70% of the non-ferrous material recovered from incinerator bottom ash. We are increasingly confident that the 2015 recycling target will now be met.”

MaterialsReview's insight:

Alupro – “This is the first set of data since further revisions were introduced to the protocol, which allows PRNs to be issued on 70% of the non-ferrous material recovered from incinerator bottom ash. We are increasingly confident that the 2015 recycling target will now be met”

No comment yet.
Scooped by MaterialsReview
October 26, 2015 4:16 AM
Scoop.it!

Meet the new London Taxi: hybrid TX5 black cab revealed

Meet the new London Taxi: hybrid TX5 black cab revealed | Aluminum | Scoop.it
London’s black cab is a globally recognised icon. Like the red phone box, Big Ben and Buckingham Palace, London’s famous Hackney Carriage has lined the streets of our capital for decades, with the most recent model remaining largely unchanged for almost 20 years.

Now though, current owner of the London Taxi Company (LTC), Geely, has debuted an all-new model for 2017 – called the TX5 – complete with a super-efficient hybrid powertrain, enough room for six passengers, and a bold new look. The new black cab be built at the company’s state-of-the-art production facility in Warwickshire, following a substantial £300m investment programme.


The TX5 design concept captures the spirit of past generations of LTC models and draws on more than sixty years of style that has made the black cab and iconic sight on the streets of London. Senior vice president of Geely design, Peter Horbury, told Auto Express: “The brief was clear. It has to look like a London taxi.”


The new design uses a similarly vertical front grille, and rounded headlights, with a more upright stance and classy chrome touches. While the interior design is still under consideration, the six-seat layout has been confirmed, alongside the large panoramic glass roof for a more “premium experience.”


David Ancona, Design Director of Geely Barcelona said: “This decision was market driven. The [Mercedes] Vito quite successful because it had that extra seat. It allowed three couples to go out together, or people to go to airports in groups. So it was decided to go that way.”


It makes use of a new lightweight aluminium structure and composite panelling, and benefits from a futuristic plug-in hybrid drivetrain that will return a realistic range of “well over 100 miles” along with a “full five-star Euro NCAP score” – according to Geely bosses.


As before, the new London taxi will use a front engine, rear-wheel drive layout, allowing it to boast the same market-leading tight turning circle. Despite its obvious associations with the outgoing TX4, Geely tells us all 2,000 components have been designed from the ground up.


The taxi isn’t due to hit the streets until late 2017, though a production-ready version with prices and specs is expected a little earlier. Despite the higher specification and complex drivetrain, Ancona insists the TX5 won’t cost any more to buy or lease than the current model – thanks to government subsidies for low emission vehicles.


MaterialsReview's insight:
Cleaner, greener, more practical and similar enough to the classic black cab to avoid upsetting the purists, the new London Taxi is here! It makes use of a new lightweight aluminium structure and composite panelling, and benefits from a futuristic plug-in hybrid drivetrain that will return a realistic range of “well over 100 miles” along with a “full five-star Euro NCAP score” – according to Geely bosses.
No comment yet.
Scooped by MaterialsReview
October 23, 2015 4:59 AM
Scoop.it!

Week-In-Review: Regulation Nation Goes Back to the Future

Week-In-Review: Regulation Nation Goes Back to the Future | Aluminum | Scoop.it
States 1, EPA 0

Things got started Monday when the Sixth Circuit Court of Appeals stayed the Environmental Protection Agency’s new controversial Waters of the US rule in all 50 states. EPA has been accused over overstepping its authority to regulate new bodies of water and 16 states have already challenged the new water rules in court. The circuit court’s action extends a stay on the rules in those states to the entire nation.


The National Association of Manufacturers called it a “tremendous victory,” as the rule would put manufacturers on the hook to get permits for storm drains, manmade ponds and other “waters.” Good luck in court, EPA. You’re going to need it. Expect more skirmishes like this in the months ahead before the full court decides on the legality of the law.

Speaking of Waters, Alcoa Owns a Riverbed

That’s right, not only is Alcoa, Inc., a huge primary aluminum smelter, and an added-value services provider but it’s also in the hydroelectric power business!

In another case of a court saying “not yours, government,” the state of North Carolina was on the receiving end of the legal smackdown as Alcoa successfully argued it owns the bottom of the Yadkin River, where the aluminum giant was attempting to renew its federal hydroelectric license.

Alcoa had a smelter along the river in Badin, North Carolina for decades before they closed it in 2010. Hydroelectric dams on the river fueled its operations. Since then, Alcoa has taken the power the dams generated and sold it on the wholesale market as Alcoa Power Generating, Inc.

North Carolina argued that Alcoa was only allowed to use the river so long as it was providing jobs via its smelter. US District Judge Terrence Boyle ruled in April that the Yadkin was not navigable before being dammed, undercutting the state’s claim to the riverbed. Then last month he ruled that Alcoa owned the land under the river outright, saying that Alcoa showed it has title to the 38-mile stretch of the Yadkin on which it operates the 4 hydroelectric stations.

This week a key permit will come due for Alcoa’s license renewal process.

A state judge ruled in late September that environmental regulators illegally denied Alcoa a state water-quality certification that is needed to renew its federal license. That judge ordered the Department of Environmental Quality to act on Alcoa’s application within 30 days (next week is the deadline).

The water-quality certification, if granted by DEQ, would say that Alcoa’s hydro project doesn’t harm the Yadkin and would clear the way for renewal of the company’s federal license for up to 50 years.

The new Yodercorp Power Generation Chicago Dam will be set up in the run-off stream behind the alley on my home in the next few weeks. I hope it’s not navigable waters!

India Has Climate Plans, Too!

Our friends in India got into the regulation of greenhouse gases game this week by releasing an “Intended Nationally Determined Contribution (INDC) for 2030.” What’s that, you ask? Other than a title with a lot of qualifiers?

It’s a climate change reduction blueprint document that’s heavy on predictions of greenhouse gas reductions from the world’s 4th-largest polluter (behind China, the US and Europe) and light on the details of how, exactly, India will achieve its 2030 goals. However, as my colleague Sohrab Darabshaw points out, it’s the best starting point India has ever had when it comes to cleaning up its major industries.

Back to the Aluminum Future

This week also saw us reach the actual day, October 21, 2015, that Marty McFly takes the DeLorean time machine to in the 1985 film, Back to the Future!

The Aluminum Association, however, would like to take the DeLorean back to 2013 before imports of Chinese semi-finished products rose 115%.

The Association is petitioning the US International Trade Commission for relief from the flood of imports and will meet with officials from the China Non-Ferrous Metals Industry Association, its Chinese counterpart, next week.

MaterialsReview's insight:
Back to the Aluminum Future

This week also saw us reach the actual day, October 21, 2015, that Marty McFly takes the DeLorean time machine to in the 1985 film, Back to the Future!


The Aluminum Association, however, would like to take the DeLorean back to 2013 before imports of Chinese semi-finished products rose 115%. The Association is petitioning the US International Trade Commission for relief from the flood of imports and will meet with officials from the China Non-Ferrous Metals Industry Association, its Chinese counterpart, next week.

No comment yet.
Scooped by MaterialsReview
October 22, 2015 11:25 AM
Scoop.it!

Don't Miss Out – Free Registration for ALUMINUM USA

Don't Miss Out – Free Registration for ALUMINUM USA | Aluminum | Scoop.it
On November 11-12, the ALUMINUM USA trade show will be held at the Cobo Center Detroit. Representing the entire value chain of the aluminum industry, the event will feature over 100 companies from 18 nations, with about 40% from the U.S. and Canada and 60% from Europe and Asia, bringing a global perspective to the show. Around 2,000 visitors, including managers, engineers, and decision-makers, from around the world are expected to attend the event.

ALUMINUM USA 2015 will also be offering visits to two automotive highlights in Detroit — the Ford Rouge Factory Tour – The Henry Ford or the Automotive Hall of Fame. Registered visitors interested in attending one of the tours, should email Reed Exhibitions at attractions@aluminum-us.com by October 30, 2015 to get one of the 50 tickets available for each attraction. Please mention in the subject line which museum you would like to visit.

Registration for ALUMINUM USA is now open. Readers of Light Metal Age are invited to use the code ALU46 to receive free entry into the trade show, granting them access to aluminum company representatives ranging from materials and primary production and moving downstream to semi-fabricated producers, secondary remelters and recyclers, fabricators, and final applications, as well as equipment suppliers.


Register with discount code: ALU46.

MaterialsReview's insight:

Free Registration for ALUMINIUM USA:

On November 11-12, the ALUMINUM USA trade show will be held at the Cobo Center Detroit. Representing the entire value chain of the aluminum industry, the event will feature over 100 companies from 18 nations, with about 40% from the U.S. and Canada and 60% from Europe and Asia, bringing a global perspective to the show. Around 2,000 visitors, including managers, engineers, and decision-makers, from around the world are expected to attend the event.

No comment yet.
Scooped by MaterialsReview
October 22, 2015 5:20 AM
Scoop.it!

Global Market for Aluminium Aerosol Cans Declines Slightly

Global Market for Aluminium Aerosol Cans Declines Slightly | Aluminum | Scoop.it
AEROBAL’s secretary general Gregor Spengler does not find the figures particularly disturbing: “After years of unabated growth it is only natural that there is consolidation in the market that can then simply lead for once to a slight decline in demand and production. If one considers the extremely difficult economic situation worldwide and the general political situation and takes the record level from last year into account at the same time, this small halt in growth is not a disaster for goodness sake.”

Demand for aluminium aerosol cans stagnated in Europe but this was not a major surprise after several years of sustained growth in a market that continues to show per capita consumption rates at record levels. Russia and the markets in Asia and South America, and in particular the BRIC countries, were unable to meet their ambitious goals. The US market also showed a weaker trend in the first half of the year; however, there are already signs for an improvement in the second half of the year.

The lion’s share of all aluminium aerosol cans produced continues to go into the market for deodorants and perfumes and the market share here is stable at 80 per cent. Compared with the previous year’s figures, there was a noticeable decline in the food sector, which was just over ten per cent. This sector did not live up to what was expected of it, particularly in Europe. However, there was a clear increase in the production figures for the pharmaceutical sector where growth was only just short of being double-digit. The markets for household and technical products also bucked the trend.

Overall, at AEROBAL, whose members account after all for over 70 per cent of global production of aluminium aerosol cans, one is nourishing quite justified hope for a quick return to the road to success. Global demand improved slightly at the beginning of the second half of the year so that it appears possible that there might even be slight growth for the whole of 2015.

The ever-smaller lot sizes being demanded increasingly from the client side are a challenge for the industry. This leads not only to increased retooling but at the same time increases the complexity of production over the whole process chain.
 
“I am sure that with their expertise, their modern manufacturing facilities, their flexibility and their innovative capability our members will successfully face these challenges as they have done in previous years,” says AEROBAL’s president Giorgio Aliprandi confidently. “This also applies to the increased customer interest in weight savings, the use of new alloys or the use of recycled materials. Our World Aluminium Aerosol Can Award demonstrates what remarkable solutions AEROBAL companies have already developed here. Other examples of innovative cans can also be found on our website at www.aerobal.org or in our free online magazine CANS, which can be ordered via CANS@aerobal.org.”

AEROBAL is also quite confident when it comes to the question of possible competition from plastic aerosol cans. Plastic cans have so far only been used in a few niche markets. However, aluminium aerosol can manufacturers must be on their guard and counter this potential alternative with the obvious benefits of the aluminium can. As a recognised permanent material it is appealing with its excellent, unlimited recyclability without any loss in quality and the high material recycling rates achieved in practice. Aluminium cans do not suffer from material fatigue, exhibit better barrier properties and are compatible with all common propellants and contents. Since more than 50 years they have ensured the safe use of aerosols by end consumers worldwide. Moreover, consumers perceive aluminium as a high-grade material which differentiates it both visually and haptically from plastic and results in enhancement of the brand at the point of sale.More info:
www.etma-online.org
MaterialsReview's insight:

Following years of continuous growth during which the production figures for the aerosol can industry raced from one record to the next, the market has now finally taken a pause for breath. AEROBAL, the International Organisation of Aluminium Aerosol Container Manufacturers, reported a small decline in production worldwide of one per cent year-on-year for the first half of 2015.

No comment yet.
Scooped by MaterialsReview
October 22, 2015 3:20 AM
Scoop.it!

New role for Pohl at Novelis

New role for Pohl at Novelis | Aluminum | Scoop.it
The vice president of financial planning & analysis has assumed the role with immediate effect, replacing Steve Fisher who was promoted to chief executive officer in August. Pohl will lead all financial activities for Novelis until such time as a permanent chief financial officer is appointed.

He joined Novelis in 2009 as vice president of finance for North America and went on to take up his planning & analysis role in July 2012. Novelis operates in 11 countries, has approximately 11 500 employees and reported revenues of more than US$ 11 billion for its 2015 fiscal year.
MaterialsReview's insight:

Global: Rolled products leader Novelis Inc., the world's largest recycler of aluminium, has confirmed Steve Pohl as interim chief financial officer.

No comment yet.
Scooped by MaterialsReview
October 21, 2015 2:04 AM
Scoop.it!

Metals giant heads Bond Wolfe deal spree

Metals giant heads Bond Wolfe deal spree | Aluminum | Scoop.it
Novelis, world leader in aluminium rolling and recycling, which counts Jaguar Land Rover as a long standing partner, is taking 7,608 sq ft of office space at Hawthorns House in West Bromwich.

Headquartered in Atlanta, Georgia, its output goes into everything from beverage cans to automobiles, architecture to consumer electronics.

Its automotive division has a base at Wednesbury.

Spanning 11 countries and nearly 11,500 employees, Novelis is a subsidiary of India’s Hindalco Industries, itself part of the Aditya Birla Group.

James Mattin, Bond Wolfe managing partner, said: “We are thrilled to have attracted such a prestige client.

“It was the culmination of a search across the area. We were able to use our extensive experience and knowledge of the local market to identify accommodation that suited Novelis’ criteria. They will be modifying the space to further suit their needs but ultimately Hawthorns House and its location ticked all the boxes.”

Situated close to both Junction 1 of the M5 motorway and the A41 Birmingham Road, Hawthorns House is opposite Hawthorns railway station serving the Midland Metro and the Stourbridge to Birmingham rail line.

The firm has signed a three year lease.

In a second significant letting, MCI Logistics has taken 5 St Michaels Court, West Bromwich, also on a three year deal.

Expanding out of their existing Oldbury office, the firm is a leading supplier of professional, temporary and permanent drivers and transport personnel across the Midlands, South West and throughout the UK.

Mr Mattin noted: “The local office market has been consistently improving throughout 2015 and these latest deals follow other lettings we have concluded including SevaSupport and Arvato at Landchard House, The Labour Party at West Plaza, and the NHS at Kingston House. It is a very encouraging scenario and we are confident there is more to come.”

Bond Wolfe, which is based on the eighth floor of West Plaza and celebratedits 30th year this summer, has also completed two smaller transactions.

A takeaway shop with two bedroom flat above at 285 Walsall Road, West Bromwich, has been sold for £155,000, purchased by a local caterer for their new retail presence.


And a three year lease has been signed on 9 Bridge Street, Walsall, by a local barber shop.


It comes in the wake of a letting next door at 11 Bridge Street to Bridge Street Cycles and 13 Bridge Street to tattoo and piercing studio Vivid Ink. A further two units within the parade are under offer. “It reflects the renewed confidence in the town by local traders and operators,” said Mr Mattin.

MaterialsReview's insight:

Black Country property agents Bond Wolfe have announced a string of deals headed by the UK arm of global metals giant Novelis.

No comment yet.
Scooped by MaterialsReview
October 20, 2015 10:52 AM
Scoop.it!

ALUMINUM USA – November 11-12, 2015, Detroit, Michigan

ALUMINUM USA – November 11-12, 2015, Detroit, Michigan | Aluminum | Scoop.it

ALUMINUM USA is the place to be to get a comprehensive overview of the entire aluminum industry. With ALUMINUM USA, Reed Exhibitions expands its world leading brand ALUMINIUM to one of the most important markets for the global aluminum industry. It is the meeting place for suppliers of raw material, semi-finished and finished products, surface treatment and producers of machinery, plant and equipment for aluminum processing and manufacturing.


The United States is the world's third largest consumer market for aluminum and is experiencing a large growth in various industries. Around 2,000 international trade visitors look for new solutions and technologies, not only from producers of the raw material but also processors, refiners, suppliers for the automotive or building industry e.g. producers of sections, suppliers of the latest technologies for e.g. extrusion, heat treatment, casting, sawing or surface refinement. More than 150 exhibitors will present their latest technologies at the first edition of ALUMINUM USA in Detroit, Michigan, taking place at the Cobo Center Detroit, November, 11-12, 2015. Register now! Link: http://www.aluminum-us.com/

MaterialsReview's insight:

ALUMINUM USA is the place to be to get a comprehensive overview of the entire aluminum industry. With ALUMINUM USA, Reed Exhibitions expands its world leading brand ALUMINIUM to one of the most important markets for the global aluminum industry. It is the meeting place for suppliers of raw material, semi-finished and finished products, surface treatment and producers of machinery, plant and equipment for aluminum processing and manufacturing.

No comment yet.
Scooped by MaterialsReview from Revue de presse d'ALUMINIUM FRANCE
October 19, 2015 11:47 AM
Scoop.it!

Constellium’s AIRWARE® aerospace technology

Constellium’s AIRWARE® aerospace technology | Aluminum | Scoop.it
Constellium’s AIRWARE® is a low-density rolled and extruded aluminium alloy product that is stiffer and stronger, offering excellent mechanical properties to ensure high-performance during the demanding launch and landing phases of spacecrafts. At the same time, the lower density facilitates the ascent of spacecrafts to outer space.

AIRWARE® contributed to a successful first exploration Flight Test (EFT-1) case of NASA’s Orion Spacecraft built by Lockheed-Martin.

Together with AIRWARE® 2050, Constellium’s specific aerospace Al 2219-T87 will also feature in the main primary structure of Exploration Mission 1 (EM-1). EM1 will be the Orion’s second planned crew-less test flight.

Via ALUMINIUM FRANCE
MaterialsReview's insight:

Constellium’s AIRWARE® is a low-density rolled and extruded aluminium alloy product that is stiffer and stronger, offering excellent mechanical properties to ensure high-performance during the demanding launch and landing phases of spacecrafts. At the same time, the lower density facilitates the ascent of spacecrafts to outer space.

No comment yet.
Scooped by MaterialsReview
October 19, 2015 6:31 AM
Scoop.it!

Alcoa: Where is it Headed?

Alcoa: Where is it Headed? | Aluminum | Scoop.it
Alcoa, the US-based aluminium conglomerate, has been in the spotlight for several consecutive weeks, however some may quesiton as to why it is garnering so much attention?
What is Alcoa?

The multinational company, headquartered in New York, is a global leader in lightweight metals and manufacturing techniques. A consistent part of its competitiveness is explainable by its vertical integration in the sector. Indeed, Alcoa produces both raw aluminium and semi-manufactured products and it has operations in all major steps of the value chain: mining, refining, fabricating and recycling.

The firm mainly operates through three business divisions: Global Primary Products (GPP), Engineered Products and Solutions (EPS) and Global Rolled Products (GRP). GPP deals with pure commodity operations (mining, refining and recycling) while EPS concerns primarily manufacturing operations. Finally, the GRP is itself divided in two different functions, namely global packaging (mainly involved in industrial packaging) and aerospace, transportation and industrial (providing semi-manufactured products for those industries).
“The right time to split up”

The light metals giant has been hit by the tumbling of commodity prices (aluminium is down 20% from last year), consequently the management pursued a strategy aimed at reducing the exposure of the firm to aluminium prices. Mining and smelting operations have been substantially reduced, while the downstream business has been consolidated through the recent acquisitions of RTI Metals, Firth Rixson, and TITAL. Such dealsare intended to meet the increasing demand from aerospace and automobile industries while simultaneously consolidating the revenues coming from the business less tied with raw material quotes.


However, what mostly attracted the attention of the market was the announce on the 28th of September that the company will split its upstream and downstream operations into two publicly traded companies. The former will keep the name of the original company, while the latter’s name is still to be decided. The legacy business will consist of 64 facilities, a staff of approximately 17000 employees and a yearly revenue of $13.2 billion for 2014 while the yet unnamed company will employ roughly 43000 workers, having a comparative revenue of $14.5 billion. Indeed, the latter is forecasted to be traded at a much higher multiple due to the high-profit-margin nature of the operations. CEO and Chairman Klaus Kleinfeld commented on the operation at CNBC:

“The globally competitive Upstream Company will comprise five strong business units that today make up Global Primary Products — Bauxite, Alumina, Aluminium, Casting, and Energy,” [while] “The innovation and technology-driven Value-Add Company will include Global Rolled Products, Engineered Products and Solutions, and Transportation and Construction Solutions.” tweet

Kleinfeld will be the CEO of the downstream business while still serving as chairman of the legacy business for the transition period.

Following the release in late September, AA stocks jumped 5%. Out of the 18 analysts consulted by Bloomberg, 11 classified the stock as a buy, 6 as a hold and 1 as a sell. Consensus over the 12-month price stands at $13.40 per share, which compared to today’s (13th October) closure at $10.08, represents a 33.1% potential increase. Ultimately, the operation will create different businesses appealing different types of investors: an upstream cyclical business that is likely to generate lot of cash during upturns and a value-add business capable of delivering growth in the long term serving the automotive and aerospace industries.


Q3 Earnigs: A bad miss

Cushioning the enthusiasm tied to the split-up announce, Alcoa reported last week (on the 8th of October) third-quarter earnings per share of $0.07, missing the consensus estimate ($0.14) by half. Shares in the company fell 4% as a consequence of the release. The reasons underlying such downturn are to be fund in the large impact China’s economic downfall had on Alcoa’s business and in the numerous divestitures in the mining and smelting operations that negatively impacted revenues (down 11% from last year) coming from those. However, growing sales in the value-add business, led by heightened demand coming from the transportation industry, limited the plunge.

The biggest competitor of Alcoa, for the very nature of its business, is the global economy itself. Even though the Asian economic slowdown is likely to prevent a recovery in commodity prices, thus increasing the pressure on Alcoa’s downstream business, eventually, when the global economy strengthens, the upstream business will benefit from a rising demand in raw aluminium thus enjoying boosting revenues. In addition, Alcoa predicts a substantial aluminium deficit in 2016, if this would actually be the case demand would pick up, aluminium prices would follow and company revenues boost. Hence, for the positive outlook both upstream and downstream businesses are facing, the disappointing earnings will likely not change the consensus buy-rate attached to the stock.

MaterialsReview's insight:

“The globally competitive Upstream Company will comprise five strong business units that today make up Global Primary Products — Bauxite, Alumina, Aluminium, Casting, and Energy,” [while] “The innovation and technology-driven Value-Add Company will include Global Rolled Products, Engineered Products and Solutions, and Transportation and Construction Solutions.” tweet

No comment yet.
Scooped by MaterialsReview from The Green Book leading directory in Singapore
October 15, 2015 3:35 AM
Scoop.it!

Role of Aluminium Fabricators

Role of Aluminium Fabricators | Aluminum | Scoop.it
Building your dream house is finally happening. You have saved enough money and decided to build a contemporary house. Contemporary houses are usually quirky which allows you to show your creativity and uniqueness. Everything about the house is planned, from the design, materials to be used and even the furniture. Customizing the furnishings is ideal but it means more attention has to be given in your house construction.



If you are going to construct a 2-storey house, building a staircase will definitely be one of the things you have to be given a thought of. Usually, the staircase becomes an attraction since it consumes a big part of the house. To impress your visitors, selecting the design and materials to be used has to be given a lot of considerations. You can be after aesthetic or the quality of the materials. In most houses, the use of aluminium is preferred because it is stylish, durable and corrosion free. Aluminium is known for its excellent strength in spite of its light weigh ratio. Its flexibility makes it possible for aluminium to form into the shape and design that you desire. The group of people who have the skill to turn raw aluminium parts into a new product is called aluminium fabricators. Aluminium fabricators manufacture or construct objects using semi-finished materials to create a customize furniture or product instead of being assembled from ready-made components or parts.



Constructing a new house must be well planned and detailed. It can be meticulous but do not let the hardships you will encounter bring you down. If you have to be hands-on in order to achieve the design that you desire, do so. Remember that at the end of the day, your, house will be your escape after a long day of traveling and work. If you need to, you can seek assistance from aluminium fabricators to build your customized staircase or furniture. Doing so can make you feel totally satisfied on how your house turned out.

Via Riko Aida
MaterialsReview's insight:

Building your dream house is finally happening. You have saved enough money and decided to build a contemporary house. Contemporary houses are usually quirky which allows you to show your creativity and uniqueness.

No comment yet.
Scooped by MaterialsReview
October 14, 2015 4:15 AM
Scoop.it!

Nestlé Nespresso: Boosting the benefits of aluminium at Nespresso

Nestlé Nespresso: Boosting the benefits of aluminium at Nespresso | Aluminum | Scoop.it

Aluminium does much more than just protect your Grand Crus. It is infinitely recyclable, and can also help preserve the environment.

This is why Nespresso has made sustainable sourcing a central element of its commitment known as the Positive Cup.

A simple touch of the finger and your Grand Cru releases its unique aromas, while the empty capsule drops into the dedicated container. Is it unusable forever? Actually no. It is more likely that the used capsule is setting off on a new adventure. A bike, a car, an airplane – who knows what form aluminium will take in its next life?

Nespresso makes this message clear in its upcoming advertising campaign. This capsule is not just trash by any means; it is designed from a raw material of inestimable value, one that is infinitely recyclable.

Advantages of aluminium

Aluminium, one of the most used materials in the industrial world, has the advantage of being very lightweight.

Using it,  therefore helps to reduce the environmental footprint related to goods transport. Now more than ever, recycling aluminium is a key factor in avoiding overexploitation of the planet’s resources.

At Nespresso, aluminium is like a gleaming thread woven throughout our history. It encases our Grand Crus because it is remarkably airtight. Used as both armour and as a container, the capsule protects the ground coffee from oxygen, moisture, heat and light. Protecting against natural elements, this casing is the steward of a Grand Cru’s aromatic richness, for optimal pleasure once in the cup.

Aluminium is also used as the material best suited to the sophisticated technology of Nespresso machines.

Since its initial extraction is costly in both energy and resources, Nespresso recognises the need to make the most of aluminium’s fabulous recyclability potential: once this material is recovered and melted, it regains its original characteristics.

Aluminium recycling targets at Nespresso

Nespresso has been committed to facilitating capsule recycling since the early 1990s.


Through lengthy, persistent efforts, initially at the European level, then worldwide, the brand has managed to put in place and expand enough viable collection channels to exceed the goal it set in 2013.

By the end of 2014, Nespresso’s collection capacity had surpassed 80% through more than 14,000 dedicated collection points in 34 countries. Each of these countries requires a specific recycling system.


Sustainably sourced aluminium

Recycling aluminium saves 95% of the energy required in the initial production phase. This is why, in the late 1990s, Nespresso decided to focus on two strategic areas related to aluminium.


Downstream, the brand is educating its customers about the ecological benefits of returning used capsules.


Simultaneously, Nespresso is increasing its collection capacities to accept capsules sold worldwide for recycling. By late 2014, this capacity had surpassed 80%.


Upstream – which is often unknown to the general public – Nespresso is committed to ensuring the aluminium it uses is totally sustainably sourced. The brand must be able to ‘trace’ the origin of the aluminium it purchases, how it is produced, used and recycled.


Sustainable collaboration

For the past few years, to hold the industry more accountable and make it more transparent, the brand has been working with the International Union for Conservation of Nature (IUCN), the leading global consortium dedicated to nature conservation. It is a union of several states, more than 1,000 non-governmental organizations and about 11,000 scientists and experts working in 160 countries.


Alongside Nespresso, the organisation has paved the way for wholly pioneering perspectives to ultimately create the first sustainable aluminium standard.


“As our company relies extensively on the qualities of aluminium to protect the freshness and aroma of our high-quality coffees, we believe that these new standards will ensure greater transparency in the dedicated supply chain,” said Jean-Marc Duvoisin, CEO of Nestlé Nespresso SA.


“This will have positive consequences for consumers, businesses and the environment,” he added.


New goals

The Positive Cup sustainability programme has set a new corporate target. By 2020, Nespresso aims to have a collection capacity of 100%.


In 2015, Nespresso intends to launch trials for the current capsule-to-capsule programme. The end result means recycling used capsules into new ones, an important achievement from an environmental perspective.


First sustainable standard

The proposal quickly began turning heads of a number of industry leaders, who joined forces in 2012 to create a multi-partisan platform called the Aluminium Stewardship Initiative (ASI).

By late 2014, their efforts had paid off. The world’s first sustainable aluminium standard was created, with the support of the IUCN.

This ASI Performance Standard now determines the ethical and environmental performance criteria applicable in every step of the supply chain.


An increasing number of companies are now adopting its guidelines: major automakers, packaging producers and members of the aeronautics industry are all eager to take part in improving the sector’s performance.


2020 target

This positive enthusiasm is aligned with Nespresso’s objectives. The brand aims to have 100% sustainably sourced aluminium by 2020, one of the three key commitments of the Positive Cup.


Today, Nespresso’s aim guides its assessment of every sourcing partnership to ensure that it collaborates only with companies applying this stringent standard. This is a tangible way of promoting both the new ASI Performance Standard and sustainably sourced aluminium.

MaterialsReview's insight:

At Nespresso, aluminium is like a gleaming thread woven throughout our history. It encases our Grand Crus because it is remarkably airtight. Used as both armour and as a container, the capsule protects the ground coffee from oxygen, moisture, heat and light. Protecting against natural elements, this casing is the steward of a Grand Cru’s aromatic richness, for optimal pleasure once in the cup.


Aluminium is also used as the material best suited to the sophisticated technology of Nespresso machines.

No comment yet.
Scooped by MaterialsReview
October 9, 2015 2:52 AM
Scoop.it!

Award for aluminium recycling scheme

Award for aluminium recycling scheme | Aluminum | Scoop.it
The Ethical Corporation’s annual Responsible Business Awards recognise sustainable and ongoing business collaboration. This year’s winners in the Best Business to Business (B2B) Partnership category are Jaguar Land Rover and Novelis for their work on the REALCAR project.

The aim of the REALCAR (Recylced Aluminium CAR) project is to develop a new aluminium alloy for use in vehicle manufacture. Innovate UK played a key role in enabling this work by funding an initial research and development project.

The winning project needed to show clear environmental, social and commercial benefits. The judges commented:

This project has great commercial impact tackling a major issue with measurable impact and values, very scalable for other industries; new and unique. Multiple outcomes have emerged from a single B2B partnership - including suppliers - that stands above the rest.

This innovation helps to reduce greenhouse gases in the production phase. It also supports a circular economy. Recycling aluminium uses 95% less energy and a lighter car reduces vehicle exhaust emissions. This has the benefit of conserving energy and other natural resources.
MaterialsReview's insight:

A collaboration between Jaguar Land Rover and Novelis to develop the use of recycled aluminium has won Best B2B Partnership award.


No comment yet.
Scooped by MaterialsReview
October 8, 2015 10:19 AM
Scoop.it!

Wall Street braces for stock-market fall ahead of Fed minutes

Wall Street braces for stock-market fall ahead of Fed minutes | Aluminum | Scoop.it
The Dow industrials looked set to snap a streak of four consecutive gains, as U.S. stock futures pointed lower ahead of minutes from the Federal Reserve’s most recent policy-setting meeting.

Market reaction to better-than-expected jobless claims numbers released Thursday was muted, as stock-index futures maintained modest losses.

A relatively subdued rise in Chinese markets, where traders returned from a long holiday break, and mixed trade in European stocks set the early tone, pitching futures lower.

With that backdrop, anticipation of the Fed minutes and of Alcoa Inc.’s quarterly results — due after the close of trading Thursday — has fostered a sense of skittishness among investors, as a downdraft in commodities continues.

Futures for the Dow Jones Industrial Average YMZ5, -0.40% fell 57 points, or 0.3%, to 16,757.00, paring a deeper dip of more than 100 points earlier. Those for the S&P 500 index ESZ5, -0.43% dropped around 7 points, or 0.4%, to 1,980.25. Futures for the Nasdaq-100 index NQZ5, -0.46% were down 16 points, or 0.4%, to 4,307.00.

The Shanghai Composite Index SHCOMP, +2.97% closed up just under 3%, as that market reopened after a five-session holiday break, but the gain wasn’t enough to satisfy investors. The Hang Seng China Enterprises Index HSCEI, -1.03% rallied 11.5%, while the Chinese market was closed, and investors had expected bigger gains from China, said Angus Nicholson, market analyst at IG.

Nicholson said Chinese stocks started selling off at the open. “Given the HSCEI had performed so strongly over the five days, it was hoped it could put in another 2% performance today,” he said in emailed comments. The HSCEI closed down 1% on Thursday.

Also read: China could become a big problem for stocks again

Others noted that investors are also cashing in on some gains for U.S. stocks. “The markets have been boosted by the prospect of an interest-rate increase being pushed back to next year, following last week’s poor jobs report,” said Craig Erlam, senior market analyst at Oanda, in emailed comments.

The S&P 500 SPX, +0.80% and the Dow industrials DJIA, +0.73% have gained a respective 2.3% and 2.7% this week so far. On Wednesday, U.S. stocks rose across the board, with the Dow posting gains for the fourth-straight session. The S&P 500 tapped near a psychological resistance level of 2,000, closing just shy of that at 1,995.83, a 0.8% gain for the session.

Need to know: Why this stock-market rebound isn’t just a ‘flash in the pan’

Fed minutes ahead: Some insight on the Fed’s thinking could come with the release of the minutes of the Sept. 17 Fed meeting, due at 2 p.m. Eastern Time. In particular, markets will be looking for more clues on why the central bank held back on an interest-rate hike. They are also likely to focus on what the U.S. central bankers thought about China and job creation. September saw a unexpectedly sharp drop in payrolls.

The jobless claims reported showed the number of people who applied for U.S. unemployment benefits fell by 13,000 to 263,000 in the week ended Oct. 3, marking the lowest level since mid-July.

Stocks to watch: Investors will also be braced for the unofficial kickoff to earnings season, which comes after the close of trading Thursday with earnings from Alcoa Inc. AA, -0.36%

The aluminum producer is expected to post a year-over-year profit decline for the first time in six quarters. It could lead out what’s expected to be the weakest reporting season in six years for S&P 500 companies.

Shares of Encana Corp. ECA, +3.80% rose 5% in premarket after Canada Pension Plan Investment Board (CPPIB) and The Broe Group said they have agreed to buy oil and gas assets from the company for a value of about $900 million.

U.S-listed shares of Deutsche Bank AG DB, +1.37% DBK, -0.88% could also move after the bank warned it will take a €5.8 billion ($6.5 billion) charge and could cut its dividend this year.

Dell Inc. is in talks to combine with EMC Corp. EMC, +0.58% according to people familiar with the matter, reported The Wall Street Journal late Wednesday. EMC shares rallied 3.6% ahead of Thursday’s opening bell.

Shares of Amazon.com Inc. AMZN, +0.83% could add to late-session gains after a Bloomberg report that the online retailer could be showing interest in launching a live, online TV service. Etsy ETSY, +0.78% shares looked set to fall after Amazon announced the launch of a rival to the online crafts marketplace.

Other markets: The Nikkei 225 index NIK, -0.99% finished down nearly 1%, after weak Japanese machinery orders prompted buying of the Japanese yen USDJPY, -0.09% which rose against the U.S. dollar.

European stocks SXXP, -0.16% traded mixed, with the FTSE 100 index UKX, +0.26% on track for a seven-day winning streak. The Bank of England left key interest rates unchanged at the conclusion of its rate-setting meeting.

Oil prices CLX5, +0.56% continued to gain, though a surprise rise in U.S. inventories was keeping that advance in check. Gold prices GCZ5, -0.91% declined 1%.
MaterialsReview's insight:

With that backdrop, anticipation of the Fed minutes and of Alcoa Inc.’s quarterly results — due after the close of trading Thursday — has fostered a sense of skittishness among investors, as a downdraft in commodities continues.

4Josh Taylor's curator insight, October 14, 2015 1:00 AM

This article explains recent stock exchanges for both the U.S. And China, the U.S. stock market is experiencing consistent losses while China's stock market is rising. This is most definitely a negative effect for our economy. I did not realize how poorly our stock market was doing currently. 

3Smith Damir's curator insight, October 14, 2015 6:18 PM

(a) What indicator is being discussed?

      Stock Market

(b) Summarize the article:

      This is negative economic new because it talks about how the stock market is falling because the companies stocks are falling which causes them to trade and downdraft their stocks.

(c) I did not realize:      I did not realize that the stock market provides companies with access to capital in exchange for giving investors a part of ownership in the company.
Scooped by MaterialsReview
October 8, 2015 7:26 AM
Scoop.it!

Stressed aluminium industry seeks govt cover

Stressed aluminium industry seeks govt cover | Aluminum | Scoop.it
Facing the twin onslaught of galloping imports and meltdown in global prices, the domestic aluminium industry on Wednesday made a strong pitch for a safeguard duty breather in its meeting with revenue secretary even as its demand for doubling import duty to 10% remains unanswered.

Sources said representatives from all three major domestic aluminium producers — Vedanta, Hindalco and Nalco — under the aegis of Aluminium Association of India (AAI) met revenue secretary Hasmukh Adhia and appraised him that since 55% of domestic demand is being met through imports, nearly half of their 2.1 MT capacity is lying unutilised.

“The prices of the metal have also crashed. Since April 2011, aluminium prices at London Metal Exchange (LME) have dropped by 42% from $2,623/tonne to $1,540/tonne in August this year, but the production cost remains the same. The domestic industry is hardly making any money, but reeling under a mammoth debt burden of R70,000 crore. Government needs to step in to save the industry from bleeding,” said an industry source.

AAI representatives have also told Adhia that due to the prevailing conditions, Vedanta was forced to shut down its rolling mill at Balco and de-rated its Lanjigarh refinery operations by half, affecting more than 1,500 jobs.
With domestic demand cooling off, Chinese firms have now increasingly looking at India as a a convenient destination to off-load their surplus aluminium. Industry sources said unless the government steps in, their Rs 1.4 lakh crore investment to ramp up cumulative capacity to 4.1 MTPA from current 2 MTPA stands jeopardised.

AAI representatives could not be reached for comments. It was also not known what transpired in the meeting between AAI office-bearers and revenue secretary.

AAI representatives had met finance minister Arun Jaitley last month requesting to raise the basic customs duty on aluminium products to 10% from 5% now.

The government had recently imposed a 20% provisional safeguard duty on imports of certain catergory of steel.
MaterialsReview's insight:

Sources said representatives from all three major domestic aluminium producers — Vedanta, Hindalco and Nalco — under the aegis of Aluminium Association of India (AAI) met  revenue secretary Hasmukh Adhia and appraised him that since 55% of domestic demand is being met through imports, nearly half of their 2.1 MT capacity is lying unutilised.

No comment yet.
Scooped by MaterialsReview
October 7, 2015 5:28 AM
Scoop.it!

Roy Harvey Assumes Leadership of Alcoa’s Global Primary Products Group

Roy Harvey Assumes Leadership of Alcoa’s Global Primary Products Group | Aluminum | Scoop.it
Lightweight and high performance metals leader Alcoa (NYSE:AA) today announced that Roy Harvey, Executive Vice President, Human Resources and Environment, Health, Safety and Sustainability, is appointed President of Global Primary Products (GPP), succeeding Bob Wilt, effective immediately. Harvey previously served as both Chief Operating Officer and Chief Financial Officer of GPP, Alcoa’s upstream business. The Company recently announced plans to separate the upstream and value-add businesses into independent publicly-traded companies.

“Roy Harvey is an excellent leader to continue the transformation of our Global Primary Products Group into one of the industry’s strongest global competitors”

“Roy Harvey is an excellent leader to continue the transformation of our Global Primary Products Group into one of the industry’s strongest global competitors,” said Klaus Kleinfeld, Alcoa Chairman and Chief Executive Officer. “He has a strong track record of success working across the upstream businesses - in mining, refining, smelting and casting operations – in Europe, South America and North America. Roy’s experience and proven performance will be invaluable as Alcoa prepares to launch the upstream business as a public company.”

During his career, Harvey has also held several key corporate and group-level business assignments. He served as Director of Corporate Treasury and as head of Investor Relations and most recently he had oversight for all talent programs for Alcoa’s 60,000 worldwide employees as well as responsibility for the Company’s global health, safety and environmental programs.

Harvey graduated from Columbia University School of Engineering and earned Master Degrees in Finance and International Business from the Wharton School of Business at the University of Pennsylvania.

Kleinfeld also thanked Bob Wilt for his 16 years of service to Alcoa. “As President of GPP U.S. during the economic recession, Bob led Alcoa’s upstream facilities in the U.S. through one of the most dramatic downturns in the history of the aluminum industry. Most recently, as GPP President, Bob led the restructuring of Alcoa’s global primary portfolio and oversaw a wide range of productivity improvements that substantially increased the global competitiveness of Alcoa’s upstream businesses.”


About Alcoa

A global leader in lightweight metals technology, engineering and manufacturing, Alcoa innovates multi-material solutions that advance our world. Our technologies enhance transportation, from automotive and commercial transport to air and space travel, and improve industrial and consumer electronics products. We enable smart buildings, sustainable food and beverage packaging, high-performance defense vehicles across air, land and sea, deeper oil and gas drilling and more efficient power generation. We pioneered the aluminum industry over 125 years ago, and today, our more than 60,000 people in 30 countries deliver value-add products made of titanium, nickel and aluminum, and produce best-in-class bauxite, alumina and primary aluminum products. For more information, visit www.alcoa.com, follow @Alcoa on Twitter at www.twitter.com/Alcoa and follow us on Facebook at www.facebook.com/Alcoa.

MaterialsReview's insight:

“Roy Harvey is an excellent leader to continue the transformation of our Global Primary Products Group into one of the industry’s strongest global competitors”

No comment yet.
Scooped by MaterialsReview
October 7, 2015 2:32 AM
Scoop.it!

Alcoa to provide Airbus with multimaterial fastening systems

Alcoa to provide Airbus with multimaterial fastening systems | Aluminum | Scoop.it
Alcoa, headquartered in New York and Pittsburgh, has signed contract valued at approximately $1 billion with Airbus to provide high-tech, multimaterial aerospace fastening systems, according to the company. The deal is Alcoa’s largest fastener contract ever with the aircraft manufacturer. Alcoa says its fasteners fly on every Airbus platform.

“Our growing aerospace capabilities, technology strength and global, first-rate customer service continue to strengthen Alcoa’s decades-long partnership with Airbus,” says Alcoa Chairman and Chief Executive Officer Klaus Kleinfeld. “Alcoa is proud to partner with Airbus to provide breakthrough technologies for some of the most advanced aircraft in the world.”

Alcoa’s fasteners will be used to assemble some of Airbus’s latest high-growth airplanes, including the A350 XWB, Airbus’ newest commercial airplane, and the A320neo. In addition, Airbus will use Alcoa’s fastening systems for longer-running platforms, including the A330, according to Alcoa.

As part of this agreement, Alcoa says it will supply advanced fastening systems, such as those that enhance the assembly of aircraft panels and engine pylons on newer airplanes with sophisticated design features.

Alcoa’s fasteners are made using a variety of materials, including stainless steel, titanium and nickel-based superalloys, which improve fatigue life, enable lightning strike protection and improve wear and reusability on conventional and composite aircraft, the company says. Alcoa will produce these fastening systems at 14 of its global manufacturing facilities.

Alcoa acquired global titanium company RTI International Metals, aerospace components manufacturer TITAL and global jet engine parts leader Firth Rixson in an effort to grow its aerospace business. Alcoa also has grown organically. It opened the world’s largest aluminum-lithium facility in Lafayette, Indiana, launched expansions to increase jet engine parts production in La Porte, Indiana, and Hampton, Virginia, began installation of advanced aerospace plate manufacturing capabilities in Davenport, Iowa, announced plans to double its coatings capabilities for jet engine components in Whitehall, Michigan, and announced an investment in technology that strengthens the metallic structures of traditional and additive manufactured parts, also in Whitehall.

Alcoa Fastening Systems & Rings, a business unit of Alcoa, is a leading worldwide designer and manufacturer of fastening systems and rings, including specialty fasteners, fluid fittings, assembly components, installation systems and seamless rings for aerospace and industrial applications. Headquartered in Torrance, California, the company has more than 8,700 employees at 39 manufacturing and distribution/logistics locations in 13 countries.
MaterialsReview's insight:

Alcoa will supply primarily titanium, steel and nickel-based superalloy fastening systems for every Airbus platform.

No comment yet.
Scooped by MaterialsReview
October 6, 2015 10:58 AM
Scoop.it!

How it's made - Aluminum Beverage Can - YouTube

How it's made - Aluminum Beverage Can

The aluminum soda can is a humble testament to the power and scope of human ingenuity. If that sounds like hyperbole, you should watch this video, which features eleven solid minutes of engineering explanation and is not boring for even a second.
MaterialsReview's insight:

The aluminum soda can is a humble testament to the power and scope of human ingenuity. If that sounds like hyperbole, you should watch this video, which features eleven solid minutes of engineering explanation and is not boring for even a second.

No comment yet.
Scooped by MaterialsReview
October 6, 2015 8:35 AM
Scoop.it!

New lightweight aluminum-steel alloy rivals titanium in strength

New lightweight aluminum-steel alloy rivals titanium in strength | Aluminum | Scoop.it
Old-fashioned steel has been one of the most reliable and ubiquitous building materials for centuries, so it might seem a bit outmoded to talk of a steel breakthrough. But researchers at Pohang University of Science and Technology in South Korea may have made steel cool again, not to mention stronger and lighter, reports Popular Mechanics.

The researchers have devised a method for creating an aluminum-steel alloy that is more flexible, lightweight and stronger than any kind of steel ever made.

This isn't the first time anyone has thought to add aluminum to the steel mix. Back in the 1970s, Soviet scientists recognized that by blending steel and aluminum, they could forge an ultra-strong, lightweight metal, but these advantages were always superseded by one major drawback: it was incredibly brittle. When significant force was applied, it always broke rather than bent.

The problem is that when you fuse aluminum and iron atoms together, that tends to create tough, crystalline structures called B2, which are what make the aluminum-steel alloys so brittle. No one has ever found a way around this problem, until now. Hansoo Kim and his team at Pohang discovered that if the B2 crystals could be dispersed properly throughout the steel, the surrounding alloy could insulate them from splintering.

"My original idea was that if I could somehow induce the formation of these B2 crystals, I might be able to disperse them in the steel," explained Kim.

It's not as simple as it sounds. Kim and his team spent years painstakingly heat-treating and thinly rolling their steel in repeated attempts to control when and where B2 crystals were formed. They experimented by adding bits to the mix. Nickel, for example, offered the particularly important advantage of making the crystals form at a much higher temperature. Finally, they mastered the technique.

The result of all this work is a viable aluminum-steel alloy that is 13 percent less dense compared to normal steel, and with a comparable strength-to-weight ratio compared to titanium alloys. That's significant, and it could make aluminum-steel alloy the building material of the future.

"Because of its lightness, our steel may find many applications in automotive and aircraft manufacturing," said Kim.
MaterialsReview's insight:

"Because of its lightness, our steel may find many applications in automotive and aircraft manufacturing," said Kim.

No comment yet.
Scooped by MaterialsReview
October 6, 2015 5:43 AM
Scoop.it!

Aluminum Association responds to U.S-China joint presidential statement

Aluminum Association responds to U.S-China joint presidential statement | Aluminum | Scoop.it
The Aluminum Association, based in Arlington, Virginia, has issued a statement commending the Joint Presidential Statement by the United States and China which lays out concrete and achievable goals for addressing climate change promptly.

The association says the U.S. aluminum industry has long been part of the solution to address climate change, citing the automotive, construction and packaging industries as three sectors that have relied on the use of aluminum as an efficient, sustainable material.

The U.S.-China Joint Presidential Statement promises to make these kinds of gains enjoyed in the United States commonplace in China within a short period of time, the Aluminum Association states.

“We welcome China’s commitments to a cleaner manufacturing future, and the use of aluminum will be a meaningful solution to the challenges of global climate change,” says Heidi Brock, president and CEO of the Aluminum Association. “As they work to address climate change, we believe China should commit to setting appropriate standards for aluminum production emissions and coal usage, taking offline production assets that do not meet those standards.”

According to the Aluminum Association, in 2005, China supplied 13 percent of the world’s aluminum. Today, spurred by energy subsidies, Chinese producers supply roughly half of this metal, the association says. China’s tax regime also incentivizes the export of this excess, carbon-intensive production which has displaced energy-efficient, sustainably produced North American aluminum, the association claims.

The Aluminum Association says it is working to raise the visibility of a variety of issues with the U.S. government related to the global trade of aluminum, calling on relevant authorities to investigate claims of unfair trade practices like the deliberate misclassification of metal to avoid taxes, and urging bilateral discussions between China and the U.S.
MaterialsReview's insight:

The Aluminum Association, based in Arlington, Virginia, has issued a statement commending the Joint Presidential Statement by the United States and China which lays out concrete and achievable goals for addressing climate change promptly.

No comment yet.
Scooped by MaterialsReview
October 6, 2015 5:08 AM
Scoop.it!

Recycling Aluminium Cans: Problems Associated With Improper Disposal

Recycling Aluminium Cans: Problems Associated With Improper Disposal | Aluminum | Scoop.it
Aluminium cans are the most environmentally friendly and most recyclable type of container in the world. Aluminum cans allow the contents inside them to retain their taste, while protecting them from the negative impact of the elements. It is very durable and has a long life span. In addition, the can itself does not get rusty or lose its properties in any way. These are probably the most important reasons why aluminium is widely used for food packaging.

Aluminium recycling is the process by which scrap aluminium can be reused in products after its initial production. The process involves simply re-melting the metal, which is far less expensive and energy-intensive than creating new aluminium through the electrolysis of aluminium oxide (Al2O3), which must first be mined from bauxite ore and then refined.

It is very beneficial to recycle aluminium, recycling scrap aluminum requires only 5% of the energy used to make new aluminum, and in addition, 10 cubic yards of landfill space are saved for every ton of aluminium recycled. Recycled cans can be used to make furniture, airplane, appliances and more.

A major problem likely to occur from improper disposal of aluminium cans is environmental pollution. This comes from the fact that aluminium cans are non- biodegradable. This means that it takes a very long time for aluminium to be degraded and so, a lot of these cans end up in landfills or lay on the streets. Just like every other non-biodegradable material, it goes further to block drainage causing flood and gives rise to stagnant water which causes other health associated problems.

When aluminium cans are wasted, they must be replaced with new ones made from raw materials. Mining of these materials poses a great threat to the environment. Toxins are released into the soil and water when bauxite is mined and processed for refining into alumina. For every ton of aluminium produced, about 5 tons of caustic red mud wastes are produced along with a host of other pollutants including airborne emissions, toxic liquid effluents, etc.

The safety of man’s health in the environment is endangered due to the fact that once the environment is polluted, a lot of toxic waste are released which will result in respiratory diseases, poisoning, etc.

In the long run, we will be at the losing end when we fail to take proper care of our environment.

Don’t just throw your cans away, dispose them properly by supplying to appropriate waste management agencies.
MaterialsReview's insight:

Aluminium is a silvery-white, soft, non-magnetic ductile metal. It is the third most abundant element (after oxygen and silicon) in the Earth’s crust, and the most abundant metal there.

No comment yet.