This is my coke piano/launchpad. I've used an arduino mega and a python script programmed by me, with the PyAudio library. Basically, the launchpad can play any sound loop in .wav, so I added some samples and some piano sounds.
There’s no denying the fact that everyone loves the ever popular Arduino. However, the “shield” approach used by Arduino has its limitations and those of us that are also fans of the Gadgeteer prototyping platform know that there’s a better solution – modules. Finally, it looks like there will be a module-based Arduino derivative that will allow the use of Gadgeteer modules.
This project is about building a PC-based temperature and relative humidity logger using the chipKIT Uno32 board and the DHT11 sensor. The project setup requires no additional wires (other than the USB cable) and components; the DHT11 sensor is directly plugged into four I/O pins of the Uno32 board and the project is ready to go. This could be a handy and an easiest way to setup an ambient room monitoring system for a server room. The Uno32 reads the temperature and relative humidity from the DHT11 sensor at preset interval and sends the data to PC through the USB-UART interface. A PC application is developed using the open-source Processing programming platform to log data onto an ASCII file. The PC application also displays the real-time temperature and relative humidity on computer screen.
Finally!!! Finally I put my hands on a brand new Arduino Yún. I’ve been waiting for this a long, loooong time. I’ve been playing with Arduino since the “diecimila” model came out and I, as a lot of people, always suffered the lack of connectivity and of real computing power. I tried to solve some of these problems using RaspberryPi and/or Electric Imp, but I always missed the Arduino approach… easy, lots of shields and Arduino ready parts, a lot of documentation, a strong community and the freedom of Open Source.
LIMBERboard is an atmel based, flexible, stretchable, programmable microcontroller board embracing open source design. Ideal for makers of all kinds, LIMBERboard is particularly suited for the growing wearable technology space.
This second sensor project uses the IR Fire Sensor. It has two outputs, 1 digital, 1 analog. I'm using the digital output (sensitivity set with onboard trimmer pot) to set the Pin 13 LED, to show flicker. I'm dumping the raw analog output to the serial monitor.
Your Arduino Yún includes two lightweight software components that make it easy to connect with hundreds of APIs and cloud services from any sketch.
First, there's a small C++ library called Temboo.cpp that comes bundled with the Arduino IDE. When you include this library in a sketch, it provides a streamlined syntax for configuring and invoking calls to run Temboo Choreos.
Behind the scenes, calls to Temboo are routed to a client program that comes packaged with your Linino base image. This client is a Python program that formats the Choreo execution request and uses HTTPS to forward the request to Temboo via the cURL utility.
Tessel is an Internet-connected microcontroller for software developers. It runs JavaScript right on the device—no server necessary. Use your own IDE and libraries to program it, just like web development. Uploading new firmware is as easy as tessel push!
Tessel is an internet-connected microcontroller programmable in JavaScript that enable developers to extend the reach of the web to physical things. Since Tessel is compatible with Node.js and leverages the Node Package Manager, adding additional capabilities is as easy as plugging in a Tessel module and npm installing its firmware. Get Tessel and start making smart, internet connected devices!
Raise the perfect bread, brew beautiful beer, and rear happy chicks with an Arduino temperature controller. If you live in a less than reliable climate like England, directions that tell you to keep something at a set temperature aren’t particularly helpful – we don’t have air conditioners, and raising the thermostat for the whole house isn’t practical for just making a loaf of bread. Even kept inside, chicks can die if the temperature drops at night; and getting them to hatch in the first place has an even stricter temperature range. But I need my bread, and the chicks need hatching – so instead of purchasing expensive equipment, we can cobble together a competent temperature controller with an Arduino and household bits.
A robot with the brains of a Raspberry Pi and the easy build of LEGO®.
We would like to introduce the BrickPi : a project at Dexter Industries to turn the Raspberry Pi into a robot.
The BrickPi is a slide-on board that turns your Raspberry Pi into a robot. The BrickPi helps you connect LEGO® Mindstorms sensors, motors, and parts to easily turn your credit card size computer into a powerful robot.
It seems that our dorm room, which has six people, needs some type of “Protocol” in order to keep everything running smoothly. Dividing the chores up can be a tricky task, and there are a number of ways to do it. Balancing washing dishes, vacuuming, cleaning the bathroom, and taking out the garbage between six people evenly can be a bit of a pain. On top of that, with a shared budget for food, keeping track of IOU’s is equally difficult.
In this project you’ll take two simple ideas — a classic “cricket” noisemaker and a solar battery charger — and combine them into something great. Along the way you’ll also learn how to use the Arduino microcontroller as efficiently as possible for minimal power consumption.
The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE.
The Google Creative Lab is hoping to change that with a new open source project called "Coder," which turns the Pi into a "personal Web server and Web-based development environment." After installing the Coder image on a Pi's SD card and hooking it up to your network, you'd log into it from a browser on a Windows, Mac or Linux computer connected to the same network. It works in Chrome, Internet Explorer, Safari, Firefox, and any "relatively modern browser."
This was a 2 hour project I whipped up in order to learn how to use a new Bluetooth LE 4.0 module I picked up at redbearlab.com, called a BLE Mini.
I've since thought of several much simpler ways (and more dependable) to accomplish the same thing, such as simply lighting 3 LEDs behind weather icon cut-out masks instead of the whole servo thing... but again, I wanted to learn to run the servo too. So there it is.
Consumer film scanners don’t provide enough detail, and professional models require too much money and pampering. What’s a dedicated film nerd to do? For Peter De Smidt, the answer was to build his own high-res scanner using the Nikon D600 and 50mm Micro lens he already had on hand, a bit of lumber and a lot of patience.
The basic idea is that a DSLR can capture a super-detailed scan of a negative or slide if it takes the sit-and-stitch route, capturing the image one little piece at a time and later stitching the results together to produce a final composite. De Smidt’s basic rig consisted of a backlit holder for the film and a sliding piece to hold the camera above it.
An increasing number of vendors offer 32-bit microcontrollers based on ARM® Cortex®-M processors, and at the same time, there are also new development environments introduced for these microcontroller products. Some programming languages and tools, previously available only for programming for desktop computers, are being ported to ARM microcontrollers too.
A long while back (in a galaxy very far away), we built a temp and humidity monitor with the SHT-21 chip. It's a very accurate, albeit very expensive, solution. What if good enough, is good enough? If you don't need scientific resolution, the DHT-11 is a very inexpensive solution. Today we built a temp and humidity monitor with this module. I started off with a DHT-11 breakout board from geeetech. I used this module because it has the pull up resistor and a conditioning capacitor onboard. I connected S (signal) to pin 2, - to Gnd, and + to 5vdc.
A fountain can make a nice decorative fixture for your garden. But it isn't always easy to run a power cord out to where you want it. So I decided to run it on solar power. The system is controlled by an Arduino. This allows you to save energy by programming when the fountain will be turned on.
The other day, we gave you an overview of the Yún’s hardware. Today, we are going to talk about the Bridge library, describing how it facilitates communication between the two processors. The Arduino Yún has two different processors on-board: an Atheros AR9331 running Linino (a customized OpenWRT GNU/Linux distribution maintained by Dog Hunter) linked through its serial port with an Atmel ATMega32U4 (the same processor as the Leonardo). The Bridge concerns itself with communication between these two parts of the Yún.
Everybody seem to build something remote controlled, So I though - Why not to control my REAL car (Toyota Corolla 2007) with a remote ?! It took lots of time, few major technological barriers (Reading the remote with Arduino, controlling transistors, DC motor) but it works !
To get content containing either thought or leadership enter:
To get content containing both thought and leadership enter:
To get content containing the expression thought leadership enter:
You can enter several keywords and you can refine them whenever you want. Our suggestion engine uses more signals but entering a few keywords here will rapidly give you great content to curate.