GL.inet Comet 5G (GL-RM10RC) is a KVM over IP solution with a 3.69-inch touchscreen display and 5G RedCap (Reduced Capability) IoT cellular connectivity,...

wolfSSL wolfIP is open-source, lightweight TCP/IP stack with no dynamic memory allocations designed for resource-constrained embedded systems.

CircuitMess NASA Artemis Watch 2.0 is a programmable, NASA-themed smartwatch based on an ESP32-S3 WiFi and Bluetooth module and a 1.14-inch monochrome...

Advantech MIO-5356 is an industrial-grade, 3.5-inch fanless SBC powered by Wildcat Lake processor up to the Intel Core 7 350 hexa-core SoC...

Aethyr Research has released post-quantum encrypted IoT edge node firmware for ESP32-S3 targets that boots in 2.1 seconds and supports full PQC (Post...

RealTek RTL8159 10GbE to USB 3.2 adapters sell for $55 and up, and perform best on 20 Gbps USB ports, not so much on Thunderbolt/USB4 ports...

Sanctuary Systems' Sentinel Core is a Raspberry Pi CM5 mini-ITX carrier board with a PCIe x16 slot to easily connect a graphics card to accelerate 3D...

Mekotronics is known for its unusual Rockchip devices, and the R57-5S is a Rockchip RK3576 mini PC for kiosks and digital signage applications with a...

Telink has launched the TL322x wireless MCU family, starting with the TL3228, featuring a 192 MHz dual-core RISC-V MCU, and supporting Bluetooth 6.0,...

Digi International Digi IX25 is a rugged, industrial 5G cellular router designed for critical and enterprise applications.Built around a 1.2 GHz...

Forlinx Technology has recently introduced the FCU1501, a rugged, fanless industrial embedded computer and IoT gateway built around the Rockchip RK3506J...

The AWOL Vision Aetherion is a new Ultra Short Throw (UST) 4K Android TV 14 projector built around the MediaTek MT9655 TV SoC.Additionally, the projector...

Volos Projects recently showcased an easy-to-reproduce, inexpensive DIY ESP32-S3 Internet radio based on a Waveshare ESP32-S3-LCD-1.54 development board...

IBASE Technology MBB1002 eATX (Extended ATX) motherboard is powered by AMD EPYC Embedded 8004 series processors and takes up to 576GB DDR5-4800 ECC memory...

Designed by Granz Scientific LLC, the SN1 Solar Node is an ESP32-C3-based IoT node/development board designed specifically for off-grid IoT projects.

AAEON Intelli TWL01 Edge is an industrial mini PC with dual 4K display support powered by an Alder Lake-N/Twin Lake processor up to the Intel Core 3 N355...

WeAct CH32V006F8U6 Mini Core is an inexpensive, tiny development board based on the 48 MHz CH32V006 RISC-V microcontroller and equipped with a USB-C port,...

Velxio is an open-source, self-hosted simulator for Arduino, ESP32, and Raspberry Pi boards that works directly in your web browser.You can drag-and-drop...

The SupTronics X1208 is a UPS and M.2 NVMe SSD HAT for Raspberry Pi 5 designed to offer fast storage and protect the system against data loss during power...

Intel discreetly introduced the Wildcat Lake Core Series 3 CPUs at CES 2026 with some high-level specifications, but no part numbers or exact CPU, GPU,...

Nuvoton's new NuMicro M3331 is a series of 32-bit Arm Cortex-M33 MCUs clocked at 180 MHz that integrate an ARGB LED controller, a DSP instruction set, a...

This may sound like an April Fool's joke, but the Raspberry Pi 4 with 3GB RAM is real and now offered for $83.75.Raspberry Pi also announced another...

Toradex has launched two new ultra-compact (30x30mm) System-on-Module (SoM) families: OSM and Lino, powered by NXP i.MX 91 or i.MX 93 Arm Cortex-A55 SoC...

LILYGO T-Display-P4 is a feature-rich ESP32-P4 + ESP32-C6 devkit, but with a smartphone-like design and support for GPS, Ethernet, and LoRaWAN through...

When it comes to deploying local LLMs, many people may think that spending more money will deliver more performance, but it's far from reality.  That's...