Espressif Systems released the ESP-IDF v6.0 framework a few days ago with stable support for ESP32-C5 and ESP32-C61 SoCs, as well as preview support for...

CIX has introduced the ClawCore Armv9.2 CPU family with up to 80 TOPS of AI performance, optimized for OpenClaw deployments.

Ohm Lab Neuro N6 is a compact, modular, Arduino-compatible Edge AI/AI Vision development board powered by an STMicro STM32N6 Arm Cortex-M55...

Radxa AICore DX-M1M is a compact, low-power M.2 edge AI acceleration module built around the DeepX DX-M1M neural processing unit (NPU) and delivers up to...

Instructions to installed MT7902 Linux drivers to support both WiFi and Bluetooth on Ubuntu 24.04 and other Linux distributions.

Google won't allow people to (easily) sideload apps through APK files on certified Android devices starting in September 2026.It will still be possible,...

Grinn GenioSoM-360 is the first system-on-module (SoM) based on MediaTek Genio 360P octa-core Cortex-A76/A55 SoC with a 7.4 TOPS AI accelerator.It comes...

ITEAD has sent us samples of the Open Nextion ONX3248G035 and ONX2432G028 ESP32-S3 HMI displays for review.Open Nextion is a new product line that...

Leopard Imaging LI-IMX530-10GigE-NL is a high-end 25MP global shutter camera designed specifically for the NVIDIA Holoscan edge AI platform.The camera...

Waveshare "Gigabit / 2.5G Dual Ethernet Mini-Computer (B)" is a thin Raspberry Pi CM5 fanless mini PC with a 4K HDMI video output, 2.5GbE and Gigabit...

The SparkFun OpenScale - IoT project is a ready-to-use ESP32-based IoT smart scale with open-source hardware and firmware support that makes it easy to...

Designed by Rabbit-Labs EU, the Flipper Zero ESP32-C5 multi-board is an expansion board for the Flipper Zero built around the ESP32-C5 dual-band Wi-Fi 6...

AERIS-10 is an open-source hardware, "low-cost" (more on that later) 10.5 GHz phased array radar system featuring Pulse Linear Frequency Modulated (LFM)...

Espressif's ESP32-P4 revision 3.0 and greater converts pin 54 of the chip from NC (non-connected) to a power rail (VDD_HP_1), requires a few extra...

Ampisu is a Raspberry Pi RP2040-based, pocket-sized, isolated USB lab power supply programmable with a WebUSB GUI and SCPI commands.

KiCad 10 open-source EDA software has just been released with support for dark mode, importers for Allegro, PADS, and gEDA/Lepton PCB, and various changes...

8-inch ESP32-P4 touch display supports WiFi 6, BLE, 802.15.4, optional 4G LTE and LoRaWAN connectivity, integrates camera, mic array, speaker...

u-blox has expanded its JODY family of modules with the NXP IW623/AW693-based JODY-W6 series that adds tri-band Wi-Fi 6E and Bluetooth 5.4 (including LE...

Designed by Clintech Ltd.in Bulgaria, the Clintech Pico Board appears to be the first development board based on the Raspberry Pi RP2354B chip with 2MB...

We have previously written about various industrial Raspberry Pi systems and gateways that come with RS-485 built in, but we had yet to cover a dedicated...

PycoClaw is a MicroPython-based platform for running AI agents on ESP32 and other microcontrollers that brings OpenClaw workspace-compatible intelligence...

Elecrow has sent us a solar-powered ThinkNode M6 Meshtastic device for review.Last year, I reviewed the ThinkNode M1 and M2 Meshtastic nodes, and I was a...

ADLINK has just launched the DLAP-701 Series, a NVIDIA Jetson T5000/T4000-based compact edge AI platform designed for humanoid robots, autonomous mobile...

Advantech EKI-6333BE-4GD is a tri-band Wi-Fi 7 industrial-grade access point designed for autonomous systems with support for redundant 12V - 48V DC...

The M5Stamp C6LoRa is a compact LoRa SMD module that combines the ESP32-C6 Wi-Fi 6, Bluetooth LE, and 802.15.4 microcontroller with the SX1262 LoRa...