The Firefly HDMI-to-MIPI-CSI converter board converts an HDMI video and audio source into a MIPI-CSI camera stream for supported Rockchip SoCs, which is...

Designed by Ruictec in China, the TD04 is a LoRa-based low-power tracker that also features BLE and dual-band GNSS.It supports both indoor and outdoor...

Waveshare ESP32-C6-Touch-AMOLED-1.8 is an ESP32-C6-based touch display development board featuring a 1.8-inch capacitive AMOLED display, a 6-axis IMU,...

OpenMediaVault 8, or OMV8 for shorts, codenamed "Synchrony" has been released, now supporting only 64-bit architectures (AMD64 and ARM64), and dropping...

Jetway B903DMTX is a fanless industrial box PC built around the Intel N97 quad-core Alder Lake-N CPU and designed for industrial applications with up to...

Firefly Technology has introduced the CAM-3576 series of tiny (38 × 38 mm) SBCs based on the Rockchip RK3576 processor with a 6 TOPS NPU for AIoT, edge...

Elecrow CrowPi 3 is the latest CrowPi learning and development kit featuring 41 built-in modules and over 150 lessons, and offering compatibility with...

Elecrow has sent us a sample of the "CrowPanel Advanced 7inch" ESP32-P4 HMI display for review.It is designed for high-performance AI and IoT (AIoT)...

HackyPi 2.0 is an ESP32-S3-based USB hacking and automation tool designed for both coders and non-coders.It features AI-assisted control, HID keystroke...

The ESP32-S3 AIoT Basic is a low-cost, learning, and prototyping kit for the ESP32-S3.The board integrates common AIoT peripherals directly onto a single...

Forlinx Embedded has recently released the FCU3011, a compact, fanless industrial AI edge computer built around the NVIDIA Jetson Orin Nano, designed for...

If you do, then you're in luck, thanks to the Suptronics X1013 expansion board for the Raspberry Pi 5, which adds ten USB ports for a total of fourteen...

Waveshare RP2350-Touch-LCD-1.85C is a Raspberry Pi RP2350 devkit with a 1.85-inch round touchscreen display with 360×360 resolution, a built-in...

Forlinx has recently released the FET1126Bx-S, a low-power SoM, which is based on the Rockchip RV1126B (commercial) or RV1126BJ (industrial) SoC.Designed...

XyphroLabs's UsbGpib is an open-source hardware, inexpensive, and portable USB to GPIB adapter aiming to provide "access to legacy GPIB/IEEE-488...

Bit-Brick Cluster K1 is a cluster board designed to mount up to four SSOM-K1 system-on-modules powered by a SpacemiT K1 octa-core RISC-V processor.The...

M5Stack NanoH2 is an ultra-compact, standalone IoT development kit powered by an Espressif Systems' ESP32-H2 wireless SoC with support for Zigbee, Thread,...

The Cerelog ESP-EEG is an 8-channel, low-cost brain computer interface (BCI) circuit board built around the ESP32 MCU and designed for EEG data...

Lattice Semiconductor has recently launched the MachXO4 low-power FPGA family featuring 896 to 9400 LUTs, fabric performance of up to 150 MHz, and...

VIEWE has launched a 4-inch round HDMI display with 720x720 resolution, and a USB touchscreen function suitable for SBCs like the Raspberry Pi, PCs...

Auvidea X242 is an industrial carrier board for NVIDIA’s Jetson Thor T5000 module, targeting edge AI, robotics, vision, and high-bandwidth embedded...

ESP-Scope is an open-source firmware transforming any ESP32 board into an oscilloscope using one of the ADC pins up to 83,333 Hz sample rate (on the...

GD32VW553-UNIFI is an inexpensive wireless IoT module based on GigaDevice GD32VW553 RISC-V microcontroller featuring 2.4 GHz WiFi 6 and Bluetooth 5.2 LE...

Seeed Studio sent us a review sample of the XIAO Soil Moisture Sensor powered by the XIAO ESP32C6 wireless module and running on a single AA battery.

Elecrow's "All-in-One Starter Kit for ESP32-P4" is an open-source learning and prototyping platform based on the ESP32-P4 processor, offering AI,...