21st Century Learning and Teaching
792.4K views | +4 today
21st Century Learning and Teaching
Related articles to 21st Century Learning and Teaching as also tools...
Curated by Gust MEES
Your new post is loading...
Your new post is loading...

Popular Tags

Current selected tag: 'makerspace'. Clear
Scooped by Gust MEES
August 31, 2017 10:53 AM
Scoop.it!

Teaching Electronics to Kids: Mechanically Programmed (no Circuit Board) Obstacle Avoiding Robot | #MakerED

Teaching Electronics to Kids: Mechanically Programmed (no Circuit Board) Obstacle Avoiding Robot | #MakerED | 21st Century Learning and Teaching | Scoop.it
Welcome to the exciting world of teaching STEM (Science, Technology, Engineering, and Math) to your own kids or for charitable work. Kids are naturally curious about how things work, and with a new trend in hardware companies creating open source hardware products, it's a great time to teach kids about electronics. But modern technology can seem too complex to even begin to understand. So where do you start?

About the Robot: This robot will run on tile, wood, laminate, low cut carpet, or other smooth surfaces. As it is designed, it will not work on extremely rough surfaces such as concrete, shag or tall carpet, grass, and such. The rough cost of this robot should be less than $10. On average, about $5~7 dollars if you look. You can find the majority of these parts on Amazon, salvage from Goodwill, garage sales, or other places..

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker+practice

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

Gust MEES's insight:
Welcome to the exciting world of teaching STEM (Science, Technology, Engineering, and Math) to your own kids or for charitable work. Kids are naturally curious about how things work, and with a new trend in hardware companies creating open source hardware products, it's a great time to teach kids about electronics. But modern technology can seem too complex to even begin to understand. So where do you start?

About the Robot: This robot will run on tile, wood, laminate, low cut carpet, or other smooth surfaces. As it is designed, it will not work on extremely rough surfaces such as concrete, shag or tall carpet, grass, and such. The rough cost of this robot should be less than $10. On average, about $5~7 dollars if you look. You can find the majority of these parts on Amazon, salvage from Goodwill, garage sales, or other places..

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker+practice

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

No comment yet.
Scooped by Gust MEES
July 23, 2017 4:39 PM
Scoop.it!

The First Transistor (Teaching Model): 9 Steps (with Pictures) | #MakerED #Electronics

The First Transistor (Teaching Model): 9 Steps (with Pictures) | #MakerED #Electronics | 21st Century Learning and Teaching | Scoop.it
Didactic model of the "first transistor".In this project the models such as constructing a didactic model of the first transistor for which I made use of the materials that can be easily obtained, in addition to a little painting, the prototype / model I did on a scale a little larger than the original.

 

But from before, a bit of history.It all started at Bell Labs, where American physicists Jhon Bardeen, Walter Houser Brattain, and William Shockley conducted experiments and observations to try to create a solid-state amplifier, making use of the properties of semiconductor materials, thus replacing the Vacuum used at that time.The above image shows the first transistor created at Bell Labs in Murray Hill, New Jersey, United States in 1947.

 

Its inventors won the Nobel Prize in Physics in 1956 for "their research on semiconductors, and the discovery of the transistor effect." Now we continue with the instructions...

 

Learn more / En savoir plus / Mehr erfahren:

 

https://en.wikipedia.org/wiki/Transistor

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makered

 

Gust MEES's insight:
Didactic model of the "first transistor".In this project the models such as constructing a didactic model of the first transistor for which I made use of the materials that can be easily obtained, in addition to a little painting, the prototype / model I did on a scale a little larger than the original.

 

But from before, a bit of history.It all started at Bell Labs, where American physicists Jhon Bardeen, Walter Houser Brattain, and William Shockley conducted experiments and observations to try to create a solid-state amplifier, making use of the properties of semiconductor materials, thus replacing the Vacuum used at that time.The above image shows the first transistor created at Bell Labs in Murray Hill, New Jersey, United States in 1947.

 

Its inventors won the Nobel Prize in Physics in 1956 for "their research on semiconductors, and the discovery of the transistor effect." Now we continue with the instructions...

 

Learn more / En savoir plus / Mehr erfahren:

 

https://en.wikipedia.org/wiki/Transistor

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makered

 

No comment yet.
Scooped by Gust MEES
July 3, 2017 9:08 AM
Scoop.it!

The Classroom or Library as a Maker Space | #MakerED #ModernEDU

The Classroom or Library as a Maker Space | #MakerED #ModernEDU | 21st Century Learning and Teaching | Scoop.it
Makerspaces, Maker Education, STEM, and STEAM are gaining lots of traction in Kindergarten though college level education. Articles, resources on social media, and conference presentations on these topics are proliferating at a rate that most educators are now familiar with maker education.

Makerspaces like vocational shops and science labs are great additions to schools. They often contain the tools, machinery, and technologies associated with making – 3D printers, laser cutters, vinyl cutters, high tech robotics, vocational tech machinery. These are great for educational institutions and learners that can afford them.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

Gust MEES's insight:
Makerspaces, Maker Education, STEM, and STEAM are gaining lots of traction in Kindergarten though college level education. Articles, resources on social media, and conference presentations on these topics are proliferating at a rate that most educators are now familiar with maker education.

Makerspaces like vocational shops and science labs are great additions to schools. They often contain the tools, machinery, and technologies associated with making – 3D printers, laser cutters, vinyl cutters, high tech robotics, vocational tech machinery. These are great for educational institutions and learners that can afford them.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

Letyquiov's curator insight, July 4, 2017 2:53 PM
Share your insight
Scooped by Gust MEES
May 25, 2017 6:17 PM
Scoop.it!

100+ Makerspace Materials & Products w/ Supply List | #Maker #MakerED

100+ Makerspace Materials & Products w/ Supply List | #Maker #MakerED | 21st Century Learning and Teaching | Scoop.it
Makerspace Materials & Products. Great Idea Starters and a FREE Supply List. Perfect For Makerspaces or a MakerEd Program at Your School or Library.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

https://gustmees.wordpress.com/2017/02/09/9553/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:
Makerspace Materials & Products. Great Idea Starters and a FREE Supply List. Perfect For Makerspaces or a MakerEd Program at Your School or Library.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

https://gustmees.wordpress.com/2017/02/09/9553/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Kim Auld's curator insight, May 25, 2017 8:07 PM
This is a great starting point for those schools that do not have a Makerspace at their school. 
 
Scooped by Gust MEES
May 4, 2017 10:39 AM
Scoop.it!

NEW PRODUCTS – Star Simpson’s Circuit Classics! | #Electronics #Maker #MakerED #MakerSpaces #PracTICE

NEW PRODUCTS – Star Simpson’s Circuit Classics! | #Electronics #Maker #MakerED #MakerSpaces #PracTICE | 21st Century Learning and Teaching | Scoop.it

Forrest M. Mims III is a trusted name in the electronics world for good reason: his charming and engaging texts have drawn millions of people into the world of electronics for the first time.

 

[Gust MEES] I agree!! I learned from him ;)

 

Star Simpson has created an electronic tribute to those hand-drawn circuits by bringing the projects to life. These kits are an exquisitely designed series of finely crafted and highly detailed boards. These are the Circuit Classics. They make a great gift for a first-time learner, an expert tinkerer, or even just as a fun conversation piece for your desk.

 

This initial release includes three of Forrest’s circuit designs in kit form: the Dual-LED Flasher, the Stepped Tone Generator, and the Bargraph Voltage Indicator. Each kit includes:

 

  • Printed Circuit Board (PCB): Includes the circuit itself, the circuit’s schematic, and a description of the circuit, all in Forrest’s iconic hand-drawn style, traced directly from his books. (Prototypes are OSHPark purple, but the final production run will be blue.)
  • Through-hole Components: All the components you need to build a working circuit. Easy to place and solder on the PCB thanks to clear footprints and large, friendly solder pads.
  • Display Stand: made of high-quality blond ash wood, each stand is crafted to let you proudly display your work.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:

Forrest M. Mims III is a trusted name in the electronics world for good reason: his charming and engaging texts have drawn millions of people into the world of electronics for the first time.

 

[Gust MEES] I agree!! I learned from him ;)

 

Star Simpson has created an electronic tribute to those hand-drawn circuits by bringing the projects to life. These kits are an exquisitely designed series of finely crafted and highly detailed boards. These are the Circuit Classics. They make a great gift for a first-time learner, an expert tinkerer, or even just as a fun conversation piece for your desk.

 

This initial release includes three of Forrest’s circuit designs in kit form: the Dual-LED Flasher, the Stepped Tone Generator, and the Bargraph Voltage Indicator. Each kit includes:

 

  • Printed Circuit Board (PCB): Includes the circuit itself, the circuit’s schematic, and a description of the circuit, all in Forrest’s iconic hand-drawn style, traced directly from his books. (Prototypes are OSHPark purple, but the final production run will be blue.)
  • Through-hole Components: All the components you need to build a working circuit. Easy to place and solder on the PCB thanks to clear footprints and large, friendly solder pads.
  • Display Stand: made of high-quality blond ash wood, each stand is crafted to let you proudly display your work.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
May 3, 2017 12:47 PM
Scoop.it!

fischertechnik GmbH - ROBOTICS - BT Smart Beginner Set | #Maker #MakerED #MakerSpaces

fischertechnik GmbH - ROBOTICS - BT Smart Beginner Set | #Maker #MakerED #MakerSpaces | 21st Century Learning and Teaching | Scoop.it
NEU!

 

Das komplette Einsteigerpaket für Kinder ab 8 Jahre. Aus über 380 Bauteilen und mit Hilfe der Sensoren (Fototransistoren, Taster) und der Aktoren (XS Motoren, Lichtschranken LEDs) können Kinder 12 leicht verständliche Modelle wie Händetrockner, Karussell, Schranke, Förderband mit Stanzmaschine oder auch mobile Raupenmodelle konstruieren. Die Steuerung »BT Smart Controller« mit 4 Eingängen für Sensoren und 2 Ausgängen für Motoren oder Lampen verfügt über eine USB-Schnittstelle und eine Bluetooth 4.0 Schnittstelle.

 

Die Software »ROBO Pro Light« (zum Download) ermöglicht eine schnelle, anschauliche und leicht verständliche Programmierung der Modelle. Zusätzlich gibt es auch die Möglichkeit die Modelle mit dem Tablet (zunächst Android) über eine App zu programmieren. Das ausführliche didaktische Begleitmaterial, welches auf dem fischertechnik eLearning-Portal (fischertechnik-elearning.com) zur Verfügung steht, unterstützt den Lernprozess der Kinder und erklärt leicht verständlich die Programmierung. Für die Ingenieure und Programmierer von morgen.

 

Inkl. BT Smart Controller als Steuerung (USB-Schnittstelle/Bluetooth 4.0 Schnittstelle), Steuerungs-Software ROBO Pro Light (System: Windows 7*, 8, 10/Tablet: zunächst Android), 2x XS Motor, 2x Lichtschranken LED, 2x Fototransistor, 2x Taster und Batteriehalter für 9V-Block (Batterie nicht enthalten).* Für Windows 7 ausgewählte Bluetooth 4.0 Sticks erforderlich.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

Gust MEES's insight:
NEU!

 

Das komplette Einsteigerpaket für Kinder ab 8 Jahre. Aus über 380 Bauteilen und mit Hilfe der Sensoren (Fototransistoren, Taster) und der Aktoren (XS Motoren, Lichtschranken LEDs) können Kinder 12 leicht verständliche Modelle wie Händetrockner, Karussell, Schranke, Förderband mit Stanzmaschine oder auch mobile Raupenmodelle konstruieren. Die Steuerung »BT Smart Controller« mit 4 Eingängen für Sensoren und 2 Ausgängen für Motoren oder Lampen verfügt über eine USB-Schnittstelle und eine Bluetooth 4.0 Schnittstelle.

 

Die Software »ROBO Pro Light« (zum Download) ermöglicht eine schnelle, anschauliche und leicht verständliche Programmierung der Modelle. Zusätzlich gibt es auch die Möglichkeit die Modelle mit dem Tablet (zunächst Android) über eine App zu programmieren. Das ausführliche didaktische Begleitmaterial, welches auf dem fischertechnik eLearning-Portal (fischertechnik-elearning.com) zur Verfügung steht, unterstützt den Lernprozess der Kinder und erklärt leicht verständlich die Programmierung. Für die Ingenieure und Programmierer von morgen.

 

Inkl. BT Smart Controller als Steuerung (USB-Schnittstelle/Bluetooth 4.0 Schnittstelle), Steuerungs-Software ROBO Pro Light (System: Windows 7*, 8, 10/Tablet: zunächst Android), 2x XS Motor, 2x Lichtschranken LED, 2x Fototransistor, 2x Taster und Batteriehalter für 9V-Block (Batterie nicht enthalten).* Für Windows 7 ausgewählte Bluetooth 4.0 Sticks erforderlich.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

No comment yet.
Scooped by Gust MEES
April 14, 2017 4:47 PM
Scoop.it!

#Maker-Easy to build mini #car with Battery-Holder case and #motor, as also a self-made #propeller | #MakerED

#Maker-Easy to build mini #car with Battery-Holder case and #motor, as also a self-made #propeller | #MakerED | 21st Century Learning and Teaching | Scoop.it

Easy to build mini car with Battery-Holder case and motor, as also self-made propeller . . In our last projects WE were using electronics, which is a bit more for teens up from 10 years. WE will now also create some projects where the younger ones can tinker around as well under the…

 

Learn more / En savoir plus / mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

 

Gust MEES's insight:

Easy to build mini car with Battery-Holder case and motor, as also self-made propeller . . In our last projects WE were using electronics, which is a bit more for teens up from 10 years. WE will now also create some projects where the younger ones can tinker around as well under the…

 

Learn more / En savoir plus / mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

 

No comment yet.
Scooped by Gust MEES
April 12, 2017 5:51 PM
Scoop.it!

Why Making Is Essential to Learning | #LEARNingByDoing #Maker #MakerED #MakerSpaces #Creativity

Why Making Is Essential to Learning | #LEARNingByDoing #Maker #MakerED #MakerSpaces #Creativity | 21st Century Learning and Teaching | Scoop.it
Research shows that hands-on learning is an effective way to teach students science. A 2009 study found that eighth-grade students who were involved in hands-on science projects demonstrated a deeper understanding of concepts than students who were taught with traditional methods such as textbook readings, lectures, and tests (Riskowski et al., 2009).

Why is hands-on learning effective? We can look to neuroscience for insight. Students who participate in science experiments, instead of just observing them, have a deeper conceptual understanding of science. Through brain imaging, researchers found that physical experience activates the sensorimotor region of students' brains, which helps reinforce what they're learning (Kontra et al., 2015).

 

If students use their hands as well as their minds, they're essentially learning twice.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

 

Gust MEES's insight:
Research shows that hands-on learning is an effective way to teach students science. A 2009 study found that eighth-grade students who were involved in hands-on science projects demonstrated a deeper understanding of concepts than students who were taught with traditional methods such as textbook readings, lectures, and tests (Riskowski et al., 2009).

Why is hands-on learning effective? We can look to neuroscience for insight. Students who participate in science experiments, instead of just observing them, have a deeper conceptual understanding of science. Through brain imaging, researchers found that physical experience activates the sensorimotor region of students' brains, which helps reinforce what they're learning (Kontra et al., 2015).

 

If students use their hands as well as their minds, they're essentially learning twice.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

No comment yet.
Scooped by Gust MEES
April 6, 2017 11:17 AM
Scoop.it!

How to make the simplest electric car - homemade mini car | #Maker #MakerED #MakerSpaces #Creativity 

How to make the simplest mini electric car - homemade car subscribe to my channel at http://www.youtube.com/subscription_center?add_user=MCIsection 

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:

How to make the simplest mini electric car - homemade car subscribe to my channel at http://www.youtube.com/subscription_center?add_user=MCIsection 

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
April 3, 2017 8:39 AM
Scoop.it!

Softlink | Make Magazin | Conductive Ink Projects | #Maker #MakerED #MakerSpaces #STEM #Creativity #PracTICE

Softlink | Make Magazin | Conductive Ink Projects | #Maker #MakerED #MakerSpaces #STEM #Creativity #PracTICE | 21st Century Learning and Teaching | Scoop.it

Make 1/2017, Seite 82

Leitungen malen

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

Gust MEES's insight:

Make 1/2017, Seite 82

Leitungen malen

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

No comment yet.
Scooped by Gust MEES
March 26, 2017 12:59 PM
Scoop.it!

Maker-First Steps in Electronics-Light guided rotating and moving plastic container | #MakerED #MakerSpaces

Maker-First Steps in Electronics-Light guided rotating and moving plastic container | #MakerED #MakerSpaces | 21st Century Learning and Teaching | Scoop.it

Light guided rotating and moving plastic container. In previous Maker tutorials WE were using LEDs and vibration motors, WE will continue with it and adding some NEW components: a transistor and a LDR (Light-Dependent Resistor). WE will use ALSO AGAIN a plastic container, this time a transparent one so that persons could see…

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
March 15, 2017 10:52 AM
Scoop.it!

This Lego tape turns anything into a Lego-friendly surface—and it's ridiculously cheap | #MakerED #Kids

This Lego tape turns anything into a Lego-friendly surface—and it's ridiculously cheap | #MakerED #Kids | 21st Century Learning and Teaching | Scoop.it
Lego tape is such a great idea, we're amazed it's not an official Lego product already. This product is being funded on Indiegogo.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

Gust MEES's insight:
Lego tape is such a great idea, we're amazed it's not an official Lego product already. This product is being funded on Indiegogo.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

Sébastien PASTOR's curator insight, March 21, 2017 2:38 PM
Simple and practical this tape can be used for anything !
Sébastien PASTOR's comment, March 21, 2017 3:06 PM
Thank you Gust Mees you have scooped it first ! Very interesting !
Gareth Trim's curator insight, March 28, 2017 4:01 AM

Where can I get this!!!!!

Scooped by Gust MEES
March 10, 2017 11:53 AM
Scoop.it!

Voice-Controlled Robot - Google Cloud Services | #MakerED #Coding #MakerSpaces #Android 

Voice-Controlled Robot - Google Cloud Services | #MakerED #Coding #MakerSpaces #Android  | 21st Century Learning and Teaching | Scoop.it
Build a voice-controlled Arduino robot. You will use your own Android phone (powered by Google Cloud Services) to control it. Lots of fun!. Find this and other hardware projects on Hackster.io.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:
Build a voice-controlled Arduino robot. You will use your own Android phone (powered by Google Cloud Services) to control it. Lots of fun!. Find this and other hardware projects on Hackster.io.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
July 28, 2017 12:57 PM
Scoop.it!

9 LED Knight Rider Circuit | LED Running Light | Led Chaser | #Maker #MakerED #MakerSpaces #Electronics

9 LED Knight Rider Circuit | LED Running Light | Led Chaser | #Maker #MakerED #MakerSpaces #Electronics | 21st Century Learning and Teaching | Scoop.it
This is a simple circuit consists of 9 LED lights in knight rider scanner mode. Get the circuit diagram and working of this project completely in this post.

 

Learn more / En savoir plus / Mehr erfahren:

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=electronics

 

Gust MEES's insight:
This is a simple circuit consists of 9 LED lights in knight rider scanner mode. Get the circuit diagram and working of this project completely in this post.

 

Learn more / En savoir plus / Mehr erfahren:

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=electronics

 

wavysquares's comment, July 29, 2017 2:33 AM
thanks
Scooped by Gust MEES
July 4, 2017 2:41 PM
Scoop.it!

Makerfest at LTESCH in Luxembourg (Europe) | #MakerED

Makerfest at LTESCH in Luxembourg (Europe) | #MakerED | 21st Century Learning and Teaching | Scoop.it

Makerfest at LTESCH in Luxembourg (Europe) A <===> Makerfest <===> was organized at Lycée Technique ESCH/ALZETTE on 04-07-2017. Over 1.000 persons, apparently 2.000 expected, were present on the second Makerfest at LTESCH (Luxembourg), organized by BEECREATIVE, Service National de la Jeunesse, SCRIPT. Lots of different schools from around the country were present with their students (learners)…

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2016/04/05/luxembourg-education-interviews-5-creativity-and-maker-spaces-beecreative/

 

Gust MEES's insight:

Makerfest at LTESCH in Luxembourg (Europe) A <===> Makerfest <===> was organized at Lycée Technique ESCH/ALZETTE on 04-07-2017. Over 1.000 persons, apparently 2.000 expected, were present on the second Makerfest at LTESCH (Luxembourg), organized by BEECREATIVE, Service National de la Jeunesse, SCRIPT. Lots of different schools from around the country were present with their students (learners)…

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2016/04/05/luxembourg-education-interviews-5-creativity-and-maker-spaces-beecreative/

 

No comment yet.
Scooped by Gust MEES
June 24, 2017 2:04 PM
Scoop.it!

​Raspberry Pi simulator lets you start tinkering without even owning a Pi | #Coding #MakerED

​Raspberry Pi simulator lets you start tinkering without even owning a Pi | #Coding #MakerED | 21st Century Learning and Teaching | Scoop.it
If you want to build your own gadgets using the Raspberry Pi but don't have the kit or even a Pi, there could soon be another way to get started.

Microsoft is building an online Raspberry Pi simulator that allows users to write code to control emulated hardware, and that currently lets users interact with an LED and collect data from a sensor.

The simulator shows a graphic of a Pi wired to a combined humidity, temperature, pressure sensor and a red LED via a breadboard, a plug board that allows circuits to be wired together rapidly. Users can type in a side panel to enter Node.js JavaScript code, which can be used to control the LED and collect dummy data from the simulated sensor. That code can be executed using a command line at the base of the panel.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

Gust MEES's insight:
If you want to build your own gadgets using the Raspberry Pi but don't have the kit or even a Pi, there could soon be another way to get started.

Microsoft is building an online Raspberry Pi simulator that allows users to write code to control emulated hardware, and that currently lets users interact with an LED and collect data from a sensor.

The simulator shows a graphic of a Pi wired to a combined humidity, temperature, pressure sensor and a red LED via a breadboard, a plug board that allows circuits to be wired together rapidly. Users can type in a side panel to enter Node.js JavaScript code, which can be used to control the LED and collect dummy data from the simulated sensor. That code can be executed using a command line at the base of the panel.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

No comment yet.
Scooped by Gust MEES
May 13, 2017 8:27 AM
Scoop.it!

Introduction to Basic Electronics, Electronic Components and Projects | #Maker #MakerED #MakerSpaces

Introduction to Basic Electronics, Electronic Components and Projects | #Maker #MakerED #MakerSpaces | 21st Century Learning and Teaching | Scoop.it
Learning about basic electronics and creating your own projects is a lot easier than you may think.  In this tutorial, we’re going to give you a brief overview of common electronic components and explain what their functions are.  You will then learn about schematic diagrams and how they are used to design and build circuits.  And finally, you will put this information to use by creating your first basic circuit.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=electronics

 

Gust MEES's insight:
Learning about basic electronics and creating your own projects is a lot easier than you may think.  In this tutorial, we’re going to give you a brief overview of common electronic components and explain what their functions are.  You will then learn about schematic diagrams and how they are used to design and build circuits.  And finally, you will put this information to use by creating your first basic circuit.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=electronics

 

Justin Moore's curator insight, May 16, 2017 7:46 PM
Great resource for students science projects.
Scooped by Gust MEES
May 4, 2017 9:18 AM
Scoop.it!

Raspberry Pi: This Google kit will turn your Pi into a voice-controlled digital assistant | MakerED #Coding

Raspberry Pi: This Google kit will turn your Pi into a voice-controlled digital assistant | MakerED #Coding | 21st Century Learning and Teaching | Scoop.it
The Google Assistant voice interaction kit will allow Pi fans to add voice control to their projects.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:
The Google Assistant voice interaction kit will allow Pi fans to add voice control to their projects.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
April 24, 2017 8:01 PM
Scoop.it!

How To Make a Powered Car | Electric Car | #Maker #MakerED #MakerSpaces #LEARNingByDoing #Creativity #PracTICE

Learn How to make a Powered Car. Make this easy powered car out of household items, DC motor and Paperboard Electric Car DIY. Template

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:
Learn How to make a Powered Car. Make this easy powered car out of household items, DC motor and Paperboard Electric Car DIY. Template

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=makered

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
April 13, 2017 1:17 PM
Scoop.it!

I took my Tinder date to build a drone out of LEGO and it was great | #Drones #Maker #MakerED #MakerSpaces 

I took my Tinder date to build a drone out of LEGO and it was great | #Drones #Maker #MakerED #MakerSpaces  | 21st Century Learning and Teaching | Scoop.it

Flybrix's drone kit lets you build and fly a custom drone using LEGO bricks - and it made for one of the best Tinder dates I've ever been on.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

Gust MEES's insight:

Flybrix's drone kit lets you build and fly a custom drone using LEGO bricks - and it made for one of the best Tinder dates I've ever been on.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

No comment yet.
Rescooped by Gust MEES from Makerspaces, libraries and education
April 12, 2017 1:58 PM
Scoop.it!

How To Solder: A Complete Beginners Guide | #Soldering | #Maker #MakerED #MakerSpaces

How To Solder: A Complete Beginners Guide | #Soldering | #Maker #MakerED #MakerSpaces | 21st Century Learning and Teaching | Scoop.it
One of the most fundamental skills a maker should be able to master is the ability to solder electronics.  Whether you’re building a robot or working with Arduino, knowing how to solder will come in handy.  The best thing about soldering is that it’s really fun to learn and easy to master.

What Is Soldering?

If you were to take apart any electronic device that contains a circuit board, you’ll see the components are attached using soldering techniques.  Soldering is the process of joining two or more electronic parts together by melting solder around the connection.  Solder is a metal alloy and when it cools it creates a strong electrical bond between the parts.  Even though soldering can create a permanent connection, it can also be reversed using a desoldering tool as described below.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 


Via Kim Flintoff
Gust MEES's insight:
One of the most fundamental skills a maker should be able to master is the ability to solder electronics.  Whether you’re building a robot or working with Arduino, knowing how to solder will come in handy.  The best thing about soldering is that it’s really fun to learn and easy to master.

What Is Soldering?

If you were to take apart any electronic device that contains a circuit board, you’ll see the components are attached using soldering techniques.  Soldering is the process of joining two or more electronic parts together by melting solder around the connection.  Solder is a metal alloy and when it cools it creates a strong electrical bond between the parts.  Even though soldering can create a permanent connection, it can also be reversed using a desoldering tool as described below.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

 

 

Kim Flintoff's curator insight, April 11, 2017 7:16 PM
When advising about Makerspace activities its fascinating to find how many people do not know the basic skill of soldering.  This article is a step-by-step- guide.
Scooped by Gust MEES
April 4, 2017 6:27 AM
Scoop.it!

Homemade Propeller Car | #Maker #MakerED #MakerSpaces #PracTICE #LEARNingByDoing 

Homemade Propeller Car | #Maker #MakerED #MakerSpaces #PracTICE #LEARNingByDoing  | 21st Century Learning and Teaching | Scoop.it
Recommended Age Range: Kindergarten, Elementary, Middle School (younger kids will need adult supervision and assistance since this project uses hot glue)Time Required: ~30 minutes
Difficulty: Easy


Cost: Around $10 in used supplies (The propeller is the most expensive component. I bought 4 of the one listed below for $16 total though the price fluctuates. It was $3.10 per propeller plus around $3 shipping and handling for all 4, so there is definitely a benefit to buying in bulk. A different, less expensive propeller could be used as long as it has a 2 mm shaft hole diameter.)

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Gust MEES's insight:
Recommended Age Range: Kindergarten, Elementary, Middle School (younger kids will need adult supervision and assistance since this project uses hot glue)Time Required: ~30 minutes
Difficulty: Easy


Cost: Around $10 in used supplies (The propeller is the most expensive component. I bought 4 of the one listed below for $16 total though the price fluctuates. It was $3.10 per propeller plus around $3 shipping and handling for all 4, so there is definitely a benefit to buying in bulk. A different, less expensive propeller could be used as long as it has a 2 mm shaft hole diameter.)

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

No comment yet.
Scooped by Gust MEES
March 31, 2017 10:30 AM
Scoop.it!

Raspberry Pi Zero W rival: New $10 Orange Pi 2G-IoT hooks into mobile networks | #MakerED #Coding

Raspberry Pi Zero W rival: New $10 Orange Pi 2G-IoT hooks into mobile networks | #MakerED #Coding | 21st Century Learning and Teaching | Scoop.it
Now, a new Orange Pi model, dubbed the Orange Pi 2G-IoT, goes in the opposition direction on connectivity, giving builders a 2G antenna for Internet of Things applications, as well as offering wireless LAN and Bluetooth for a price of $10.

The Orange Pi 2G-IoT goes up against the recently released Raspberry Pi Zero W, which also costs $10, and offers wireless LAN and Bluetooth but not mobile network access.

The new Orange Pi board features a 1GHz ARM Cortex-A5 32-bit processor with a Vivante GC860 graphics processor, and 256MB RAM.

It also supports 802.11b/g/n Wi-Fi, Bluetooth 2.1, and features a Raspberry Pi-compatible 40-pin GPIO connector.

Other features include video and audio inputs and outputs, and USB 2.0 ports. The 2G antenna supports GSM/GPRS data connections and there's, of course, a slot to insert a SIM card.

The device can run Android, Ubuntu, Debian, or Raspberry Pi, according to the Orange Pi 2G-IoT listing on Aliexpress.

While the Orange Pi 2G-IoT costs the same as the Raspberry Pi Zero W, the Raspberry board has double the RAM, at 512MB.

 

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

 

Gust MEES's insight:
Now, a new Orange Pi model, dubbed the Orange Pi 2G-IoT, goes in the opposition direction on connectivity, giving builders a 2G antenna for Internet of Things applications, as well as offering wireless LAN and Bluetooth for a price of $10.

The Orange Pi 2G-IoT goes up against the recently released Raspberry Pi Zero W, which also costs $10, and offers wireless LAN and Bluetooth but not mobile network access.

The new Orange Pi board features a 1GHz ARM Cortex-A5 32-bit processor with a Vivante GC860 graphics processor, and 256MB RAM.

It also supports 802.11b/g/n Wi-Fi, Bluetooth 2.1, and features a Raspberry Pi-compatible 40-pin GPIO connector.

Other features include video and audio inputs and outputs, and USB 2.0 ports. The 2G antenna supports GSM/GPRS data connections and there's, of course, a slot to insert a SIM card.

The device can run Android, Ubuntu, Debian, or Raspberry Pi, according to the Orange Pi 2G-IoT listing on Aliexpress.

While the Orange Pi 2G-IoT costs the same as the Raspberry Pi Zero W, the Raspberry board has double the RAM, at 512MB.

 

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi

 

No comment yet.
Scooped by Gust MEES
March 15, 2017 1:17 PM
Scoop.it!

Überall Lego? Nimuno-Klebeband macht's möglich | #MakerED

Überall Lego? Nimuno-Klebeband macht's möglich | #MakerED | 21st Century Learning and Teaching | Scoop.it
Ein neues Klebeband verspricht eine ebenso einfache wie geniale Idee: Wände, Stühle und Spielzeug lego-kompatibel machen. Die Crowdfunding-Kampagne ist nach einer Woche bereits deutlich überfinanziert.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

Gust MEES's insight:
Ein neues Klebeband verspricht eine ebenso einfache wie geniale Idee: Wände, Stühle und Spielzeug lego-kompatibel machen. Die Crowdfunding-Kampagne ist nach einer Woche bereits deutlich überfinanziert.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO

 

No comment yet.
Scooped by Gust MEES
March 10, 2017 12:23 PM
Scoop.it!

Explore all projects | Hackster.io | #Maker #MakerED #MakerSpaces #Coding #PracTICE

Explore all projects | Hackster.io | #Maker #MakerED #MakerSpaces #Coding #PracTICE | 21st Century Learning and Teaching | Scoop.it
Hackster is a community dedicated to learning hardware, from beginner to pro. Share your projects and learn from other developers. Come build awesome hardware!

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?tag=Ideas+for+makerspaces

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

https://gustmees.wordpress.com/2014/08/24/coding-a-new-trend-in-education-and-a-big-responsibility/

 

Gust MEES's insight:
Hackster is a community dedicated to learning hardware, from beginner to pro. Share your projects and learn from other developers. Come build awesome hardware!

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?tag=Ideas+for+makerspaces

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

https://gustmees.wordpress.com/2014/08/24/coding-a-new-trend-in-education-and-a-big-responsibility/

 

No comment yet.