Multimaterial
2.0K views | +2 today
Your new post is loading...
Scooped by MaterialsReview
September 10, 2015 4:50 AM
Scoop.it!

Paper tubes make stiff origami structures

Paper tubes make stiff origami structures | Multimaterial | Scoop.it
From shipping and construction to outer space, origami could put a folded twist on structural engineering.

Researchers from the Univ. of Illinois at Urbana-Champaign, the Georgia Institute of Technology and the Univ. of Tokyo have developed a new “zippered tube” configuration that makes paper structures that are stiff enough to hold weight yet can fold flat for easy shipping and storage. Their method could be applied to other thin materials, such as plastic or metal, to transform structures from furniture to buildings to microscopic robots.

Illinois graduate researcher Evgueni Filipov, Georgia Tech professor Glaucio Paulino and Univ. of Tokyo professor Tomohiro Tachi published their work in the Proceedings of the National Academy of Sciences.

Origami structures would be useful in many engineering and everyday applications, such as a robotic arm that could reach out and scrunch up, a construction crane that could fold to pick up or deliver a load, or pop-up furniture. Paulino sees particular potential for quick-assembling emergency shelters, bridges and other infrastructure in the wake of a natural disaster.

“Origami became more of an objective for engineering and a science just in the last five years or so,” Filipov said. “A lot of it was driven by space exploration, to be able to launch structures compactly and deploy them in space. But we’re starting to see how it has potential for a lot of different fields of engineering. You could prefabricate something in a factory, ship it compactly and deploy it on site.”

The researchers use a particular origami technique called Miura-ori folding. They make precise, zigzag-folded strips of paper, then glue two strips together to make a tube. While the single strip of paper is highly flexible, the tube is stiffer and does not fold in as many directions.

The researchers tried coupling tubes in different configurations to see if that added to the structural stiffness of the paper structures. They found that interlocking two tubes in zipper-like fashion made them much stiffer and harder to twist or bend. The structure folds up flat, yet rapidly and easily expands to the rigid tube configuration.

“The geometry really plays a role,” said Paulino, a former Illinois professor of civil and environmental engineering. “We are putting two tubes together in a strange way. What we want is a structure that is flexible and stiff at the same time. This is just paper, but it has tremendous stiffness.”

The zipper configuration works even with tubes that have different angles of folding. By combining tubes with different geometries, the researchers can make many different three-dimensional structures, such as a bridge, a canopy or a tower.

“The ability to change functionality in real time is a real advantage in origami,” Filipov said. “By having these transformable structures, you can change their functionality and make them adaptable. They are reconfigurable. You can change the material characteristics: You can make them stiffer or softer depending on the intended use.”

The team uses paper prototypes to demonstrate how a thin, flexible sheet can be folded into functional structures, but their techniques could be applied to other thin materials, Filipov said. Larger-scale applications could combine metal or plastic panels with hinges.

Next, the researchers plan to explore new combinations of tubes with different folding angles to build new structures. They also hope to apply their techniques to other materials and explore applications from large-scale construction to microscopic structures for biomedical devices or robotics.

“All of these ideas apply from the nanoscale and microscale up to large scales and even structures that NASA would deploy into space,” Paulino said. “Depending on your interest, the applications are endless. We have just scratched the surface. Once you have a powerful concept, which we think the zipper coupling is, you can explore applications in many different areas.”
Thorsten Holtz's insight:

Researchers from the Univ. of Illinois at Urbana-Champaign, the Georgia Institute of Technology and the Univ. of Tokyo have developed a new “zippered tube” configuration that makes paper structures that are stiff enough to hold weight yet can fold flat for easy shipping and storage. Their method could be applied to other thin materials, such as plastic or metal, to transform structures from furniture to buildings to microscopic robots.

No comment yet.
Scooped by MaterialsReview
September 4, 2015 4:57 AM
Scoop.it!

Stratasys Opens Direct Manufacturing Facility to the Media

Stratasys Opens Direct Manufacturing Facility to the Media | Multimaterial | Scoop.it
The original Solid Concepts facility began manufacturing their first objects 14 years ago in Valencia, California. Former 3D Systems engineers Joe Allison, Schuyler Mitchell and Ray Bradford started the 3D printing company with just two SLA 250 machines in 1991. They expanded the scope of their operations to include CNC machining along with selective laser sintering (SLS) printers, and opened a second facility in Austin, Texas. After adding an innovative and proprietary urethane casting process called QuantumCast and expanding to a few more locations by the early 2000’s, Solid Concepts had become an award-winning company and recognized innovator. In 2014, Stratasys acquired Solid Concepts along with Harvest Technologies, and merged these companies with their own Red Eye manufacturing division to form Stratasys Direct Manufacturing. Members of the media were recently invited to visit their facility in Austin, Texas for a tour.




Outside of Stratasys Direct Manufacturing facility in Austin, Texas.

Outside of Stratasys Direct Manufacturing facility in Austin, Texas.
After signing an ITAR related NDA, we were ushered into the Stratasys Direct Manufacturing facility. We were shown a few sample industrial AM parts. Then we received a tour of the plastics production facility. They primarily use DTM and EOS laser sintering machines including an EOS 800 Sin industrial 3D printer, which is used to fabricate parts from high temperature and expensive materials such as PEEK and PEKK.



We were given the tour by Kent Firestone, Senior Vice President of Operations, who impressed us with his grasp of thermoplastics and industrial additive manufacturing, a result of having worked in industrial AM since 1990 and having held management positions at 3D Systems, Solid Concepts and DTM Corporation.

The Stratasys facility is reminiscent of Shapeways, though the difference between the two is apparent. Stratasys Direct Manufacturing is a modular combination of metal and plastic industrial AM -- a surprising array of finishing services and traditional manufacturing processes like injection molding and heavy-duty machining. Shapeways, by contrast, has a highly efficient batch 3D printing system to fill orders, but they mainly print consumer goods and prototypes, lacking the kind of finishing services and metal printing capabilities of the Stratasys facility.

Kent explained how they occasionally have to change the triple pane glass window on these industrial 3D printers because the pressure and heat creates tiny cracks that eventually spread throughout the panes.

We were then shown a lift machine used to move giant nylon cakes from print jobs to a powder-removal station. We learned about the differences between various thermoplastics, machine settings and software controls, and then made a quick visit to the plastics finishing station where inserts were being completed for what could have been a lightweight drone. They have quite an expansive industrial AM material portfolio which includes aluminum, stainless steel, cobalt, nylon with carbon fiber, nylon with glass bubbles for UAV production and other lightweight parts. To make sure no one mistook them for a strictly 3D printing service, we were also taken to view a separate metal working facility.



Metal AM parts are created with an extra 6mm of metal that must be removed from the build plates

In total, Stratasys Direct Manufacturing has 14 direct metal laser sintering (DLMS) machines. Thick black covers over the glass prevented us from seeing what was being fabricated. A machine was set up to print sample parts for our benefit.

Stratasys Direct Manufacturing is ISO 9001:2009, AS9100C and ITAR Compliant, which means they can produce end-use parts for highly regulated industries such as medical, automotive and aerospace. Before we walked into the metal manufacturing facility, we walked past an open office where an exploded version of the infamous metal M1911 replica gun Solid Concepts printed in 2013 was mounted on the wall. We got to see the gun (though we were not allowed to touch), and were told that it has fired 6000 rounds to date without any mechanical issues.


Inside the metal manufacturing facility, not only was there an impressive array of DMLS machines but we were awed by the sheer number of CNC machines and other machining equipment. Kent explained the process of removing metal from 3D prints. Parts are made on metal print beds with an additional 6 mm of metal material on the bottom of each metal print in order to give them some leeway when removing them from the build plates.

All Sorts of Materials and Processes

Stratasys Direct Manufacturing is expanding their advanced manufacturing centers, direct metal laser sintering and CNC machining centers, and continues to expand the usefulness and certification of their materials by quantifying their performance. And some of the materials being certified and used in highly regulated industries might surprise you. For example, Stratasys FDM filaments and systems are now qualified to produce — and are in fact currently producing — end-use parts for the aerospace industry.

Direct Manufacturing is that they provide injection molding services, which some people may not have realized.

The reason that Stratasys Direct Manufacturing can shape-shift to accommodate nearly any type of order lies in their ability to combine degrees of traditional manufacturing, machining, post-processing and finishing services with industrial AM (or without). The essential variable in this equation is that Stratasys Direct Manufacturing’s applications engineers and consulting services work with and advise individual companies to create a path of least resistance towards filling orders quickly without sacrificing quality or imposing unnecessary cost.

Joe Allison made about industrial 3D printing after SMS Research Advisors had finished their presentation, which were especially poignant:

“This is the point where the hype stops. How do we drive this, one application at a time? When we look at the adoption cycle years from now, we will recognize that the barriers to adoption are coming down, and things are moving blindingly fast.”

“3D printing does not define innovation. 3D printing enables innovation.”

“It’s a matter of teaching people how to use 3D printing. We see that as one of our major tasks.”

Serious Manufacturing

The overall message that Stratasys is sending here is that they are serious about industrial AM. By absorbing Solid Concepts and Harvest Technology into their existing Red Eye 3D printing service, they have set themselves up as an advanced and highly modular manufacturers. What interested and surprised me most about the tour was the amount of post-processing and finishing capabilities the facility has for producing end-use parts. I left the facility with the notion that this is guerrilla team of highly-skilled manufacturers who can facilitate almost any task for any industry at any given time. And they are fast as can be.

Stratasys Direct Manufacturing finishing services include EMI and RFI shielding, bonding, tumbling, bead blasting, vapor smoothing, epoxy sealing, inserts and assembly. This 600+ employee operation is spread across multiple cities across the United States. With an engineering support staff of 100 people, Stratasys Direct Manufacturing is a full-scale manufacturing powerhouse.



Sample of plastic and metal additive and subtractive manufactured parts

Joe Allison, CEO of Stratasys, concluded our visit with “We’ve already changed the way that prototypes are made, but now we are changing the way manufacturing is done.”

Thorsten Holtz's insight:

Joe Allison, CEO of Stratasys, concluded our visit with “We’ve already changed the way that prototypes are made, but now we are changing the way manufacturing is done.”

No comment yet.
Scooped by MaterialsReview
September 4, 2015 3:07 AM
Scoop.it!

Bottom-up technique produces boron-nitride hybrid

Bottom-up technique produces boron-nitride hybrid | Multimaterial | Scoop.it

Researchers in Switzerland, Germany and the US are reporting on a new bottom-up approach to fabricate hexagonal boron-nitrogen-carbon (h-BNC) heterostructures with atomically precise BN/C boundaries and BN to C ratios. These structures could be ideal for a variety of electronics and nonlinear optics applications.


h-BNC is a hybrid material made from hexagonal boron nitride or h-BN (also sometimes called “white graphene”) and carbon. It shows great promise for different technology applications, such as efficient switching and nonlinear optics devices. However, the material is notoriously difficult to fabricate in the lab using conventional CVD growth techniques or top-down patterning. What is more, the structures produced are not very precise on the atomic scale, which means their electronic properties cannot be predicted or controlled.

The new technique, developed by Pascal Ruffieux of Empa in Dübendorf and colleagues is based on a technique called surface-assisted cyclodehydrogenation. Here, chemists fabricate a precursor monomer molecule with a characteristic shape and composition that is critical to determining the shape and electronic properties of the final structure – in this case, a BN-substituted heteroaromatic network.
On-surface synthesis

“The precursor monomer, which has two functional groups (in our case bromine atoms), is evaporated onto a metallic surface such as silver or gold under ultrahigh vacuum conditions,” explains Empa team member and lead author of this study Carlos Sanchez. “Once on the metallic surface, we can thermally activate the molecules and ‘break’ the bromine–carbon bond by annealing at a temperature of about 200°C.”

When the molecules lose their bromine atoms, the carbon atoms to which they were bonded become very reactive (and become carbon radicals), he adds. This makes them prone to react with the carbon radicals of other molecules to form covalent C-C bonds. After this step, the monomers arrange into superstructures whose shape depends on the position of the bromine atoms inside the molecules.

“Finally, we heat the sample to higher temperatures at which new covalent C-C bonds form between neighbouring C atoms,” says Sanchez. “This is the surface-assisted cyclodehydrogenation step and allows us to ‘fill the gaps’ inside the structures by forming new aromatic rings.”
Making atomically precise BNC and/or BN-doped heterostructures

Our technique could help us to make atomically precise BNC and/or BN-doped heterostructures, he tells nanotechweb.org. “Graphene (a sheet of carbon just one atom thick) despite having some of the most interesting and outstanding properties of any material today, cannot, for example, be directly used to make field-effect transistors because it lacks an energy bandgap. However, h-BN, which has a similar structure to graphene, is a wide bandgap material. By thus combining BN and C in a hybrid structure, we could make a new material that has an intrinsic bandgap.

And that is not all, thanks to the fact that we can accurately control the boundary between BN and C using our technique, we can ‘select’ the bandgap we want depending on the application the material will be used in by simply adjusting the BN to C ratio.”

The team, which includes researchers from the Max Planck Institute for Polymer Research in Mainz, the TU Kaiserslautern, the University of Tübingen, the Rensselaer Polytechnic Institute and the University of Bern, reports its work in ACS Nano DOI: 10.1021/acsnano.5b03895.
About the author

Belle Dumé is contributing editor at nanotechweb.org

Thorsten Holtz's insight:

h-BNC is a hybrid material made from hexagonal boron nitride or h-BN (also sometimes called “white graphene”) and carbon. It shows great promise for different technology applications, such as efficient switching and nonlinear optics devices.

No comment yet.
Scooped by MaterialsReview
September 3, 2015 7:41 AM
Scoop.it!

Concordia’s 2015 Petro-Canada Young Innovator Award winners

Concordia’s 2015 Petro-Canada Young Innovator Award winners | Multimaterial | Scoop.it
Saifur Rahaman and Yuan Wang study very different subjects — environmental engineering and finance, respectively — but the two Concordia scholars share one thing in common: they've both won a prestigious $10,000 research grant called the Petro-Canada Young Innovator Award.

The awards were given out on September 1 by Graham Carr, vice-president of Research and Graduate Studies, as part of an annual celebration of Concordia research excellence.

“Emerging, engaged and innovative faculty are essential to the dynamic research culture we are creating here at Concordia,” Carr says. “Saifur and Yuan are very deserving recipients.”

We asked this year's winners to explain their work.

Saifur Rahaman: "An important step towards ensuring adequate fresh water for all"


2015 Petro-Canada Young Innovator Award winner: Saifur Rahaman, assistant professor in the Department of Building, Civil and Environmental Engineering

Project: “Novel Inorganic/Organic Hybrid Advanced Materials for Thin-Film Composite Reverse Osmosis Membranes”

Summary: Reverse osmosis (RO) has become the most versatile and efficient technique to produce fresh water from saline water and other waste water.

Thin-film composite (TFC) polyamide membranes are widely used in RO plants, but they are subject to "biofouling" as micro-organisms grow on them. This results in reduced filtration capacity, and increased operational costs.

Adding a disinfection agent such as chlorine to the water can stop biofouling, but unfortunately even a few parts per billion of chlorine in water will rapidly degrade TFC polyamide membranes.

The main objective of this project is to develop a chlorine-resistant, mechanically robust organic/inorganic hybrid RO membrane.

We will investigate whether the active polyamide layer of TFC membranes can be substituted by a novel inorganic/organic hybrid material. Use of inorganic/organic hybrid material will eliminate the existence of amide linkages that render current TFC membranes highly susceptable to chlorine degradation.

Impact: Although the earth's surface is mostly water, the world faces a growing fresh-water crisis. Naturally this draws attention to water desalination. Improving this process through new and better materials would be an important step towards ensuring adequate fresh water for all.
Yuan Wang: "A substantial impact on the literature of corporate finance"


2015 Petro-Canada Young Innovator Award winner: Yuan Wang, assistant professor at the John Molson School of Business

Project: “Bond Liquidity and Investment”

Summary: Recent research has confirmed that debt liquidity — how easily a bond can be traded — is a significant determinant of the cost of debt.

For any given level of credit risk, more illiquid securities have lower prices, or increase less in value, as investors demand compensation for expected trading difficulty.

Bao, Pan and Wang (2011) find that illiquidity is by far the most important factor in explaining the changes in the U.S. aggregate yield spreads of investment-grade bonds. Furthermore, the researchers show that for bonds within the same rating category, an increase in illiquidity of one standard deviation leads to an increase in yield spreads as high as 65 basis points ­— roughly two-thirds of one per cent.

This project is the first to investigate whether illiquidity in the bond market has an effect on a firm’s investment decisions. The focus is on acquisitions, the most visible and largest investments that firms undertake. It’s an exploration of the links between the bond market’s microstructure and firms’ acquisition decisions.

Impact: I expect this study to have a substantial impact on the literature of corporate finance. Its findings should be of great interest to both regulators and practitioners, because regulation can be used to shape a better trading environment, and well-regulated firms can be expected to make better investment decisions.
Thorsten Holtz's insight:

2015 Petro-Canada Young Innovator Award winner: Saifur Rahaman, assistant professor in the Department of Building, Civil and Environmental Engineering


Project: “Novel Inorganic/Organic Hybrid Advanced Materials for Thin-Film Composite Reverse Osmosis Membranes”


Summary: Reverse osmosis (RO) has become the most versatile and efficient technique to produce fresh water from saline water and other waste water.

No comment yet.
Scooped by MaterialsReview
September 2, 2015 10:49 AM
Scoop.it!

Interconnect Challenges Grow

It’s becoming apparent that traditional chip scaling is slowing down. The 16nm/14nm logic node took longer than expected to unfold. And the 10nm node and beyond could suffer the same fate.

So what’s the main cause? It’s hard to pinpoint the problem, although many blame the issues on lithography. But what could eventually hold up the scaling train, and undo Moore’s Law, is arguably the most problematic part of device scaling—the backend-of-the-line (BEOL).

The BEOL is where the interconnects are formed within a device. Interconnects are tiny wiring schemes in devices and they are becoming more compact at each node, causing an unwanted resistance-capacitance (RC) delay in chips.

In fact, the interconnects are lagging behind the transistor portion of the device. The transistor is fabricated in the so-called front-end-of-the-line (FEOL).

“The scaling roadblocks that the interconnect faces need to be addressed,” said Sree Kesapragada, global product manager at Applied Materials. “A good analogy is that you have a Ferrari, which is the finFET transistor. But you are stuck in traffic because your interconnect is not keeping up with the Ferrari.”

And the problems are escalating at each node. For example, the Georgia Institute of Technology calculated the average delay in a chip based on several hypothetical scenarios. In a chip, the average delay due to copper resistivity increased by 7.6% from 45nm to 22nm, according Georgia Tech. But on average, the delay jumped by 21.8% from 22nm to 11nm and by 48% from 11nm to 7nm, according to researchers.

“Going from 45nm to 20nm, the delay actually scales quite well,” said Azad Naeemi, assistant professor at Georgia Tech. “But once you get to 11nm, you can’t improve the performance, even if your devices are getting better because of the interconnects. Your circuit delay goes up unless you can somehow improve the interconnects.”

To help the industry get back on track, Imec and its partners recently rolled out a new logic roadmap. As part of the roadmap, the R&D organization outlined a new interconnect path down to 7nm.

Based on Imec’s roadmap, the industry hopes to migrate to new and complex materials, such as cobalt, manganese and perhaps ruthenium, for the metallization schemes. And in the distant future, the industry is exploring carbon nanotubes and graphene.

All told, the industry will require new BEOL breakthroughs on several fronts, such as tools, materials and process schemes.

In addition, to circumvent the RC delay issues, chipmakers continue to pursue a separate path. Instead of scaling, the idea is to go vertical. On this front, there are several options, such as advanced stacked die, monolithic 3D and vertical nanowires.

The problems
In a device, there are two types of BEOL interconnect wires, intermediate and global. Intermediate wires provide the lower-level connections in a device. The global wires connect the intermediate layers.

Adding to the complexity is that chipmakers have inserted another wiring hierarchy starting at 20nm. The scheme, dubbed the middle-of-the-line (MOL), involves the local interconnects in a device.

“The big part of the performance of a circuit is determined by interconnects,” Georgia Tech’s Naeemi said. “Transistors account for less than 50% of the delay. The rest is coming from resistance and capacitance within the cell, between the cell and in the interconnect.”

At each node, the interconnect becomes more complex. For example, Apple’s A7 processor, which first appeared in the iPhone 5S, is a 64-bit system-on-a-chip (SoC) based on a 28nm process.

The A7 is a 10-level metal device. It also consists of more than 1 billion transistors and more than 10 billion vias, according to analysts. And if the total length of the copper wires was measured in the A7, it would amount to an astounding 20 kilometers, they added.

On top of that, the interconnect wires are only a few atoms thick. The distance between the wires is only a few atoms wide. And what’s more, the wires must be perfectly aligned on top of each other. “Since you are making these connections one level at a time, you have to make sure the connections land exactly on a pre-made metal line,” Applied’s Kesapragada said. “Any one via that hasn’t landed is going to reduce your chip yield by like 20%.”

The problems get worse starting at 16nm/14nm. The capacitance per unit length remains constant, but the resistance per unit length increases. “The resistance is increasing because of grain boundary scattering, surface scattering and barrier thickness,” Georgia Tech’s Naeemi said.

Any solutions?
In the BEOL, there are many process steps, which fall into two categories—patterning and the dual damascene flow. Initially, in the flow, each level of a given chip structure must be patterned to create the wiring schemes.

Today, chipmakers use 193nm immersion and multiple patterning in the BEOL. At 7nm, chipmakers would prefer to use extreme ultraviolet (EUV) lithography for BEOL patterning, at least for the more critical layers.

EUV could reduce the process steps, thereby lowering cost. But if EUV misses the window at 7nm, chipmakers would extend optical, which is an expensive solution at best.

Meanwhile, after a given level is patterned, the device goes through the copper dual damascene process. This process involves three main parts—metallization, low-k dielectrics, and the capping layer.

In the metallization flow, a structure undergoes a diffusion barrier etch step. Then, a via dielectric is deposited. An etch step then forms a gap, where the lines and vias are formed.

For years, chipmakers basically used the same metallization scheme. A thin barrier layer of tantalum (Ta) and tantalum nitride (TaN) materials are deposited using physical vapor deposition (PVD). Ta is used to form the liner and TaN is for the barrier. The barrier layer is coated over by a copper seed barrier. And finally, the structure is electroplated with copper and ground flat using chemical mechanical polishing (CMP).

At 20nm, the metallization scheme began to change. TaN is still utilized for the barrier. But using chemical vapor deposition (CVD), cobalt (Co) began to replace Ta for the liner. Compared to Ta, Co provides a superior wetting layer for copper films.

At 16nm/14nm, meanwhile, chipmakers are migrating from planar transistors to finFETs. For the metallization scheme, many foundries are using TaN for barrier and Co for the liner. Some holdouts continue to extend TaN and Ta.

Then, at 10nm, chipmakers plan to extend the finFET. For the metallization scheme, the leading candidate is TaN for the barrier and Co for the liner, according to Imec’s roadmap. Ruthenium (Ru) is another option for the liner at 10nm, according to Imec.

Ru has better wetting properties than Co, but Ru is difficult to polish. “Ru, as an option, is being pushed out,” Applied’s Kesapragada said. “It’s not at 10nm. Even at 7nm, customers are back and forth. It’s still on the table as a back-up option.”

For 7nm, there are two transistor options on the table—finFETs and the lateral nanowire FET, according to Imec. For the BEOL, the leading candidate is Co for the liner and manganese (Mn) for the barrier, according to the R&D organization.

By then, chipmakers may consider using Mn-based self-forming barriers. “Self-forming barriers can improve the scattering of the different interfaces,” said Mehul Naik, a principal member of the technical staff at Applied Materials.

Also at 7nm and beyond, the industry is exploring new gap fill techniques. In the lab, for example, Lam Research and IMEC are developing a novel bottoms-up prefill technique for vias and contacts.

Using electroless deposition (ELD) of Co, the technique results in a void-free filling of vias and contact holes. “Hopefully, we don’t need a barrier,” said Larry Zhao, a technical director at Lam Research. “But if we need a barrier, we pretty much need to do a selective deposition process on the sidewall.”

At 5nm, though, there is no clear-cut BEOL solution on the table. The industry is exploring several options, many of which are somewhat exotic. For example, Georgia Tech is exploring the idea of using a hybrid material approach. Copper or tungsten could be used for the power lines within the interconnect structure, while aluminum could be utilized for the signal wires.

“We could use one material only for power distribution. And then use another material for signal distribution, where the electromigration is not as severe,” Georgia Tech’s Naeemi said. “The wiring pitch for copper wires will be several times relaxed, which lowers the cost.”

Then, of course, there are carbon nanotubes and graphene. “A lot of breakthroughs must happen for graphene,” he said. “As soon as you start to pattern graphene, then the edges may not be perfectly smooth and the electrons scatter.”

There are other options on the table. Instead of traditional scaling, one idea is to go vertical by moving towards advanced stacked die and other 2.5D/3D IC approaches.

So far, though, 2.5D/3D technology is taking longer than expected to develop due to an assortment of technical and cost challenges.

More recently, though, the technology is gaining steam. The first wave of stacked memory and 2.5D graphics chips is entering the market. “TSVs are taking off where the applications demand it and can afford it,” said Ramakanth Alapati, director of packaging strategy and marketing at GlobalFoundries
Knowledge Center ➜ Entity
.

For some applications, the benefits are clear with 2.5D/3D technology. “You essentially eliminate a lot of the long wires by going 3D,” Alapati said. “There is a systems-level performance gain you get with in-package memory.”

So when will 2.5D/3D chips take off and move into the mainstream? “It’s about two to three years away,” said Prashant Aji, senior technical director at KLA-Tencor. “People say that cost will be the driver. We feel that functionality will be the driver.”
Thorsten Holtz's insight:

At 5nm, though, there is no clear-cut BEOL solution on the table. The industry is exploring several options, many of which are somewhat exotic. For example, Georgia Tech is exploring the idea of using a hybrid material approach. Copper or tungsten could be used for the power lines within the interconnect structure, while aluminum could be utilized for the signal wires.

No comment yet.
Scooped by MaterialsReview
September 2, 2015 8:38 AM
Scoop.it!

Metal-based 3D-printer company SLM Solutions confirms robust growth for 2015

Metal-based 3D-printer company SLM Solutions confirms robust growth for 2015 | Multimaterial | Scoop.it
Metal 3D printing appears to be catching on much faster in production environments than 3D printing with plastics. That is probably due to the fact that subtractive metal fabrication, as used in moldmaking, is a much slower process than the injection molding of plastic parts, particularly those from multi-cavity molds. Growth in 3D metal printing has been fairly strong for this process, as shown by one company.

SLM Solutions Group AG (Lübeck, Germany), a supplier of metal-based additive manufacturing technology, confirmed its current-year corporate forecast and announced the conclusion of a successful first half of 2015.

SLM CFO, Uwe Bogershausen, commented: "Compared with the previous year, we report significant growth in our revenue during the first six months of [2015]. This growth is all the more pleasing considering that the first half of the year tends to be weaker, and we anticipate most of our business in 2015 to be realized toward the end of the year. On a full-year view, we continue to project new order intake of more than 100 machines."

SLM 500Orders for SLM Solutions' metal 3D-printing machines were three times greater than during the same period in 2014, said the company. Forty machines were ordered during the first six months of 2015 (compared with 20 in 2014), including eight SLM 500HLs, the flagship system, (compared with two in the previous year); 25 SLM 280HLs (13 were sold in 2014), and seven LSM 125HLs (compared with five in 2014).

Linear Mold & Engineering (Livonia, MI) has been using the metal 3D process in its moldmaking business for more than 10 years, and this summer took delivery of two dual-laser SLM machines from SLM Solutions. As an early adopter of this technology, Linear Mold currently operates 14 3D metal printing machines, most of which are dedicated to production parts. However, Linear's conformal cooling business for moldmaking, which also uses the 3D metal printing technology, is also experiencing an uptick in demand.

Linear Mold's John Tenbusch commented recently: "Some of the SLM machines will be dedicated to conformal cooling technology," noting that as conformal cooling gains greater acceptance among OEMs, particularly those in the automotive industry, demand increases.

"The conformal cooling work is starting to pick up as customers take a serious look at this technology," Tenbusch said. "First, they have to gain acceptance of what it can do, and for that they run their own tests and trials on the technology. However, a number of them have moved past the trial stage now and are looking for applications that are a perfect fit."

Dr. Markus Rechlin, CEO of SLM Solutions Group, explained business trends for his company: "Focus on the core of our business with selective laser melting technology is paying off. Key sales revenue drivers include a high number of new orders from existing customers, and many multi-machine orders from industrial customers as well as contract manufacturers. Our new order intake also reflects a greater proportion of multi-laser machines that achieve greater build speeds for manufacturing environments. The after-sales business, which also includes metallic powders, comprises a further strategic focus."

Total operating revenue of €25.1 million was up 85.7%, in line with the higher business volumes (€13.5 million the previous year). The cost-of-materials ratio of 56.4% was comparable to the 2014 figure of 57.6%. Additionally, the number of employees as of June 30, 2015, nearly doubled from 94 to 184, with the strongest concentration of hiring in R&D.

"The global market for additive manufacturing has grown by an average of 34% over the past years, and it is set to reach a level of $22 billion by 2020, according to sector experts," added Rechlin. "We aim to grow at least as fast as the market and, better yet, would like to outpace this growth on a regular basis. In such a dynamic market environment, we do not think it exaggerated to speak of a new industrial revolution. We aim to continue to shape and design this revolution as a technology leader."
Thorsten Holtz's insight:

Metal 3D printing appears to be catching on much faster in production environments than 3D printing with plastics. That is probably due to the fact that subtractive metal fabrication, as used in moldmaking, is a much slower process than the injection molding of plastic parts, particularly those from multi-cavity molds. Growth in 3D metal printing has been fairly strong for this process, as shown by one company.

No comment yet.
Scooped by MaterialsReview
August 25, 2015 7:42 AM
Scoop.it!

Sumitomo's earnings drop for first half

Sumitomo's earnings drop for first half | Multimaterial | Scoop.it
KOBE, Japan—Sumitomo Rubber Industries Ltd. suffered drops in operating and net income during the six months ended June 30 as price/mix and foreign exchange offset gains the company reported in lower materials costs.
No comment yet.
Scooped by MaterialsReview
August 20, 2015 3:29 AM
Scoop.it!

Advanced Hybrid Electric Switches Made - Industry News

Advanced Hybrid Electric Switches Made - Industry News | Multimaterial | Scoop.it
Semiconductors are critical to computers because they allow for nanoscale electronic switches to be built. They do have limits though, as the switches can only go so small and they put out a fair amount of heat. For some time now researchers have been working on switches without semiconductors, and those at Michigan Technological University have made an important discovery towards that goal.
No comment yet.
Scooped by MaterialsReview
August 17, 2015 3:01 AM
Scoop.it!

Tiefziehen und Hinterspritzen von Kunststoff/Metall - Strukturbauteile in einem Schritt

Tiefziehen und Hinterspritzen von Kunststoff/Metall - Strukturbauteile in einem Schritt | Multimaterial | Scoop.it
Gemeinsam mit dem Institut für Umformtechnik und Leichtbau der TU Dortmund erforscht das Institut für Kunststoffverarbeitung in Industrie und Handwerk ...
Thorsten Holtz's insight:

Dieses kombinierte Verfahren nutzt zur Umformung des Metallblechs die Schließbewegung des Spritzgießwerkzeugs. Denn die Kinematik eines Spritzgießwerkzeugs ähnelt der eines Tiefziehwerkzeugs. Dadurch wird ein Prozessschritt eingespart. Ein Metalleinleger wird so während des integrierten Prozesses erst durch Tiefziehen vorgeformt und anschließend mit der Kunststoffschmelze weiter ausgeformt. Kern des Kombinationsverfahrens bildet die kombinierte Werkzeugtechnik, welche die Elemente eines Tiefziehwerkzeugs mit denen eines Spritzgießwerkzeugs vereint. Ziehstempel und -matrize sind dabei die formgebenden Elemente. Ein unabhängig von der Schließeinheit der Spritzgießmaschine steuerbarer Niederhalter sorgt für ein kontrolliertes Nachfließen des Bleches und vermeidet die Faltenbildung am tiefgezogenen Bauteil. Die Analyse des Verfahrens wird über die AiF im Rahmen der IGF vom Bundesministerium für Wirtschaft und Energie gefördert.

No comment yet.
Scooped by MaterialsReview
August 12, 2015 2:28 AM
Scoop.it!

Trelleborg expands sealing unit in Bulgaria

Trelleborg expands sealing unit in Bulgaria | Multimaterial | Scoop.it
PERNIK, Bulgaria—Trelleborg Sealing Solutions will expand manufacturing in Bulgaria by bolstering its liquid silicone molding capacity.
Thorsten Holtz's insight:

“Our investment in Bulgaria follows significant investments in Stein am Rhein, Switzerland, and Northborough, Mass.,” Ursula Nollenberger, product director of liquid silicone rubber components, said in the release. “It is part of Trelleborg’s strategy to strengthen its positions in selective attractive market segments.”

Trelleborg said silicone accounts for about 2 percent of the total market for rubber and that the advanced LSR segment currently represents about 15 percent of that silicone production. The firm added, however, that silicone is seeing exponential growth in high-tech fields where the technology can meet the manufacturing and design challenges thrown up by complex applications.

No comment yet.
Scooped by MaterialsReview
July 29, 2015 7:42 AM
Scoop.it!

Trelleborg Sealing Solutions - Product Development

Product Development at Trelleborg Sealing Solutions is featured in this video. Trelleborg Sealing Solutions: http://www.tss.trelleborg.com Worldwide Contacts...
Thorsten Holtz's insight:

It is interesting to see the process of how an idea becomes a sealing solution. Great video made by Trelleborg Sealing!

No comment yet.
Scooped by MaterialsReview
July 14, 2015 5:28 AM
Scoop.it!

Lightweighting, additive manufacturing in spotlight for Arburg

ROCKY HILL, CONN.—Arburg Inc.’s dedication of its new headquarters in Rocky Hill drew 160 attendees June 16-17, and after the ribbon cutting and speeches, they learned about lightweighting and additive manufacturing, and heard a 101-type...
Thorsten Holtz's insight:

To reduce material usage, a molder can use foaming. Gaub said Arburg has developed a foaming agent added to the plastic granulate, which releases the gas upon injection. Another method is to use Aburg’s long-fiber direct injection molding, which feeds fibers directly into the barrel, where the reinforcement is compounded into the melt.

Other lightweighting technologies include multi-material molding, particle-foaming and the use of fiber-reinforced organo-sheets to strengthen target areas of a part, Gaub said.

Grand opening attendees met Thomas Raymond, who runs the Freeformer laboratory in Rocky Hill.

Trevor Pruden, technical and engineering manager, said that, while injection molding is intended for mass production, the Freeformer is designed for smaller, batch manufacturing of production–ready parts, as well as prototyping. That concept of additive manufacturing matches up with several trends, for short product lifecycles and the need for more customization, he said.

No comment yet.
Scooped by MaterialsReview
June 18, 2015 2:49 AM
Scoop.it!

Trelleborg begins seals production at aerospace facility

Trelleborg begins seals production at aerospace facility | Multimaterial | Scoop.it
TRELLEBORG, Sweden—Trelleborg Sealing Solutions has started production of seals at a new facility at Condé sur Noireau, France.
No comment yet.
Scooped by MaterialsReview
September 8, 2015 5:22 AM
Scoop.it!

A Peek Into the Home of China’s Cheap-Phone Revolution

A Peek Into the Home of China’s Cheap-Phone Revolution | Multimaterial | Scoop.it
The sound of tapping computer keys fills the office, as hundreds of young engineers in low-walled cubicles examine chip circuitry on their computer screens and sketch out design concepts for new smartphones.

This is where the world’s cheap phones are born.

The facility is owned by Shanghai’s Wingtech Communications, which counts among its customers many of the world’s fastest-growing smartphone brands, including China’s Xiaomi, Huawei and Meizu and India’s Micromax.

China’s smartphone market has been transformed over the past few years. The market used to be filled with unreliable knock-offs – called shanzhai, or “mountain fortress,” devices in Chinese. Now China boasts a growing number of strong brands that can compete globally, putting new pressure on global smartphone makers like Samsung Electronics. Meanwhile, many of the shanzhai makers have closed up shop.

A Wingtech engineer tests the audio quality of a smartphone in a sound-proof room. A dummy assists.
Eva Dou/The Wall Street Journal

One reason behind this shift is the maturation of what has been called the red supply chain, a cheaper smartphone supply network that involves more Chinese component makers and manufacturers than the traditional electronics supply chain. The improving quality of these suppliers — such as Wingtech, Shanghai Huaqin Telecom Technology and Longcheer Holdings — has helped Chinese brands narrow the technological gap with global manufacturers while still competing on price.

While global smartphone brands like Apple also make most of their phones in factories in China, they rely more often on Taiwanese contractors like Foxconn and more international component suppliers.

The rise of the red supply chain is one reason behind a global boom in cheap smartphones everywhere from India to Brazil. Follow the supply chains of cheap phones upstream from anywhere in the world, and many of them lead back to the same origins in China.

Wingtech started out in 2006 as one of China’s many independent design houses, or IDHs in industry lingo, which sold off-the-shelf handset designs that customers could sell under their own brands. These IDHs were behind the initial rise of China’s smartphone industry, as they helped hundreds of startups with little mobile experience build their own smartphones in a matter of months. Quality issues abounded in these early Chinese smartphones, and many were knock-offs or no-name brands.

In 2008, Wingtech made the jump to manufacturing and opened its own factory. It became an original design manufacturer or ODM, which meant it offered customers a line of services from product design to manufacturing and even some aftersales service. Since then, it has winnowed down its customers from more than a hundred to just a handful of larger Chinese and Indian brands. It says its biggest clients are Xiaomi, which uses Wingtech as its contractor for its lower-cost Redmi phone line, and another leading Chinese handset maker Huawei.

A Wingtech engineer stands inside the companys signal-testing room. Smartphones are put inside the tunnel to test their signal strength, with foam lining the wall to prevent interference.
Eva Dou/The Wall Street Journal

“We’re not just a contract manufacturer like Foxconn,” said Deng Anming, Wingtech strategic manager. “Our core competitiveness is our research and design capability.”

A Meizu spokeswoman said the supplier was a supportive partner that offered competitive prices. Xiaomi, Huawei and Lenovo declined to comment. Micromax didn’t respond to a request for comment.

Wingtech these days bets on blockbusters. The market for smartphone contract manufacturing is fiercely competitive, with contractors earning tiny margins. To boot, the Chinese smartphone market has reached saturation and begun shrinking after years of breakneck growth.

A product that bombs could easily mean losses. Mr. Deng said the company agrees to make a phone for a client only if it thinks the gadget will become a big seller, as the large scale lets Wingtech negotiate down component costs and expand its profit margin. Wingtech had a net profit of around $14.6 million and a 2.2% net margin in 2014, according to a stock exchange filing by its parent company.

China Real Time recently got a rare tour of Wingtech’s Shanghai research center and factory in the nearby industrial city of Jiaxing. Wingtech didn’t permit photos in some areas due to client confidentiality.

Design:

Like most contract manufacturers, Wingtech does a lot more than just manufacture devices. It works with clients to design products, providing lower costs due to its large scale than what its clients could achieve by doing it all in-house.

Wingtech moved into a new headquarters in Shanghai in February, where it has about 600 employees. The white building has open floors with hundreds of young engineers sitting at computers, each working on a specific step in smartphone development.

Much of the work takes place out of view. Closed doors off the main room house the secret projects of major clients such as Xiaomi, Huawei, Lenovo, Meizu and Micromax.

Chinese contractors like Wingtech can help clients develop a new smartphone model in as little as six months.

A chart with patterns made up of minute lines hangs on the wall of Wingtech. The diagram is used to check smartphone cameras’ ability to capture small details.
Eva Dou/The Wall Street Journal

Testing:

Once a design is set, then comes reliability testing. Think “American Ninja Warrior” for phones. Each smartphone runs a gantlet of tests at Wingtech’s $2 million testing center before it is deemed ready for the assembly line.

Phones get plugged into a computer that opens and closes each app over and over for hours to check for glitches. The phones’ screens blink nonstop as if possessed. Afterward, the phones get an eye exam: a series of optical illusion-like diagrams and color charts to test their cameras’ focus and color capture. There’s a drop test, a heat test, a cold test, a pressure test, a humidity test. The phones are stuck inside an MRI-looking device to gauge signal strength, and strapped to a mannequin’s head to see whether the user’s hand or head will inhibit sound.

Manufacturing:

Around an hour from the Shanghai R&D center is Wingtech’s factory. Like the typical Chinese electronics factory, it is in an industrial park in the outskirts of the city and is a self-contained minitown for its employees. The 9,000 workers live in dorms on campus, and the company has a movie theater, Internet cafe and other recreational facilities to help retain workers. High turnover rate is a perennial problem for China’s electronics factories, with young workers frequently quitting due to the monotonous work.

Wingtech makes its own circuit boards and some other parts like the smartphone shells onsite. These component manufacturing processes have long been highly automated across the industry. Empty circuit boards glide down a long tunnel, where machines filled with reels of tape containing tiny components place them in the right position on each circuit board. A robot checks that everything is aligned before an oven solders everything in place. In another – much louder – building, heavy-duty machines cut and mold metal and plastic.

Then comes the final assembly, by far the most labor-intensive step. Workers go through a wind tunnel to remove debris before they can enter the assembly floor, and they wear hats and shoe covers. Different colored hats separate regular assembly workers from team leaders and higher officials.


The final assembly of smartphones is still done mostly by hand, although Wingtech and others like Foxconn have been working to automate more parts of the process. The difficulty lies in the short product life cycles of smartphones, and the more advanced movements needed to put the pieces together, which makes a fully automated assembly line prohibitively expensive right now.

But there are small advances. For instance, Wingtech has added this year a machine on assembly lines to test the audio jack of each phone. Before, a worker had to listen to each one manually.

From there, the devices are boxed up and shipped off. Wingtech-contracted phones sold close to 50 million units last year, Mr. Deng said, although only some of those were manufactured in-house. Wingtech’s factory has a capacity of 2.5 million phones a month, and it outsources production to other factories if there are excess orders.

Chinese listed real estate company Join In (Holding) Co. acquired 51% of Wingtech last month.

Although the Chinese smartphone industry faces challenges this year such as a saturated market, Mr. Deng says he is upbeat as more Chinese mobile brands go overseas.

“China’s smartphone industry is entering a golden age,” he said.

Thorsten Holtz's insight:

Wingtech makes its own circuit boards and some other parts like the smartphone shells onsite. These component manufacturing processes have long been highly automated across the industry. Empty circuit boards glide down a long tunnel, where machines filled with reels of tape containing tiny components place them in the right position on each circuit board. A robot checks that everything is aligned before an oven solders everything in place. In another – much louder – building, heavy-duty machines cut and mold metal and plastic.

No comment yet.
Scooped by MaterialsReview
September 4, 2015 4:49 AM
Scoop.it!

First Metal-Organic Framework Made With Protein

First Metal-Organic Framework Made With Protein | Multimaterial | Scoop.it
Chemists have engineered a protein so that it self-assembles with zinc ions and an organic small molecule to form the first protein-based metal-organic framework (MOF).

Including proteins in MOFs could combine the biocatalytic, electron-transfer, and molecular recognition capabilities of proteins with the separation, storage, and catalysis applications of MOFs.

Traditional MOFs, which have attracted great academic and industrial interest in recent years, consist of organic linkers connecting metal centers. Akif Tezcan at the University of California, San Diego, and colleagues are now making MOFs even more versatile by demonstrating that the materials can be synthesized with protein centers (J. Am. Chem. Soc. 2015, DOI: 10.1021/jacs.5b07463).

The researchers engineered human ferritin with metal-binding sites, permitting each protein molecule to accommodate eight zinc ions on its surface. When the engineered protein is mixed with zinc and benzenehydroxamic acid, zinc binds to the protein and benzenehydroxamic acid acts as a linker, chelating zinc ions on separate ferritins. This self-assembly process results in a MOF crystal in which each zinc-decorated ferritin is linked to eight neighboring ones.

In addition to creating a new type of MOF, the work “introduces a new strategy for the rational design of protein crystals,” Tezcan says. Self-assembling protein networks have been created before, but earlier structures were made from two independent components instead of three and formed random structures instead of crystalline ones. The addition of a third component adds design versatility to the materials, and crystals are more uniform and well-defined than noncrystalline substances. Chemists have made MOFs with amino acids or short peptides, but never before with a functional protein such as ferritin, which acts in the body to store iron.

“The material couples the ability to design, fine-tune, and crystallize MOFs with the chemical and structural diversity of proteins,” says MOF expert Omar Yaghi of the University of California, Berkeley. “By placing proteins as structural elements into MOFs, one fixes them in position to serve as addressable entities for reactions and controlled dynamics.”

Seong Huh of Hankuk University of Foreign Studies, in Yongin, South Korea, says, “This is a unique approach to immobilize functional proteins into an inorganic matrix.” Huh and Seongsoon Park of Sungshin Women’s University, in Seoul, created an earlier protein-modified MOF. They think the new MOF could be useful for protein drug delivery, new types of biocatalysts, and molecular electronic devices.

But Huh notes that it remains to be seen if other proteins can form crystalline protein-MOFs as readily as ferritin. The metal-binding protein is roughly spherical, making it more amenable to crystallization than less symmetrical proteins.

Manuel A. Navia of Oxford Bioscience Partners, who developed and commercialized cross-linked enzyme crystals, agrees that the ferritin-based MOF “may be a special case and the global exploitation of the protein-MOF concept may be difficult.”

Still Navia thinks this novel extension of MOFs represents an unexplored, new form of matter. “The work should get a lot of people thinking about really cool experiments they could do with these materials,” he says.
Thorsten Holtz's insight:

Including proteins in MOFs could combine the biocatalytic, electron-transfer, and molecular recognition capabilities of proteins with the separation, storage, and catalysis applications of MOFs.

No comment yet.
Scooped by MaterialsReview
September 3, 2015 7:43 AM
Scoop.it!

Why The Future Of 3D Printing Is In 'Multi-Material Printing'

Why The Future Of 3D Printing Is In 'Multi-Material Printing' | Multimaterial | Scoop.it
The 3D printing space has been filled with ups and downs as investors wait for the next big revolution. It's been a slow process, but Ford Motor Company F gave the industry hope when it signed a deal with Carbon3D.

Carbon3D claims that its technology is capable of printing items 25 to 100 times faster than traditional methods. This reinforced the belief that speed is one of the essential components in creating the perfect 3D printer.

However, that is not the only area that needs to be improved.

"I believe the future of 3D printing is multi-material printing," Daniel Stolyarov, co-CEO of Graphene 3D Lab Inc GPHBF, told Benzinga. "It's multi-material meaning functional material."

Related Link: 3D Printing Industry Won't Be 'Tested' Until Hewlett-Packard, Others Arrive

Stolyarov, who runs the company with Elena Polyakova, said that 3D-printed items need to consist of many materials.

"All of this material has to be combined together to make something useful, to make something that works," he said. "What we are doing is, we are doing functional materials. For example, the conductor for the filament we released. You cannot use wires for 3D printing. Metallic wires [have] different processing parameters than plastics. Metal has a much higher temperature than plastic. You cannot really combine them using the same kind of 3D printing machine."

Stolyarov said it would be "really beneficial" if 3D printers could use a wide range of materials instead of the simple options available today.

"It's coming from a static shape kind of structure to something that functions," he added. Elena Polyakova said she expects 3D printers to become more complex over the next 10 years.

"The difference between what we can do right now and what we can do in the future is like the difference between a calculator and a modern cell phone," she said.

Disclosure: At the time of this writing, Louis Bedigian had no position in the equities mentioned in this report.
Thorsten Holtz's insight:

"The difference between what we can do right now and what we can do in the future is like the difference between a calculator and a modern cell phone," she said.

No comment yet.
Scooped by MaterialsReview
September 3, 2015 3:21 AM
Scoop.it!

How are companies keeping production costs downs as blade sizes increase?

How are companies keeping production costs downs as blade sizes increase? | Multimaterial | Scoop.it
Blades are getting longer as developers demand more power from current turbine platforms. To move the trend along, the Department of Energy recently offered up $1.8 million dollars in funding for the development of 60-m long (or more) wind-turbine blades on turbines that stretch over 120 m from base to hub.

The challenge for blade-manufacturing companies is clear: increase a turbine’s energy output with larger blades while somehow keeping production and maintenance costs in check.

Rotor sets are arguably one of the most influential pieces of the energy equation, because larger blades contribute to increased annual energy production or AEP, according to Alexis Crama, LM Wind Power’s VP of Offshore Development. “It’s important to invest in material and process innovation to enable longer and more efficient blade designs,” he said.

Crama pointed out that blade size also matters when it comes to an important industry goal: reducing energy costs. “Another part of the recipe for success is working through efficient and affordable manufacturing set-ups, based on high volumes of larger turbines and longer turbine blades,” he added.

However, the first manufacturing constraint in producing longer and better performing blades is often factory size. The demand for greater blade sizes often exceeds the physical constraints of existing facilities. One answer to this energy-production challenge?

“A focus on innovation in manufacturing technology to enable better capacity utilization,” said Crama. “On the one hand we are continuously sharpening our blade technology, including aerodynamics and system integration, while on the other we are developing highly flexible and efficient industrialization set-ups to deliver quality turbine blades.”

Building longer blades presents unique design challenges, which involves re-thinking materials, structure, and other features. For example, a new hybrid carbon and glass-fiber blade was recently commercialized that extends blade length without compromising weight.

“Implementing this new hybrid material could have been costly because carbon fiber is more expensive than glass fiber,” said Crama, “But the hybrid design provided flexibility to, for the most part, use existing manufacturing processes, thereby reducing the cost of industrialization.”

Longer blades have also posed unique transportation challenges because they are too large for trucks to transport on most roads.

“Today’s blades are more prone to the effects of wear and tear than most other turbine components,” shared Jatin Sharma, Head of Business Development at insurance company GCube. “And this includes additional factors, such as the harshness of the environment and the potential for damage during transportation.”

Modular blades provide one answer to the transportation challenge. The segmented blade design provides for onsite assembly through a reliable bolted joint or a fusion system. This avoids the need for expensive cranes and specialized trucks because the blades are transported in separate parts.

Once on site and fully constructed, turbine downtime is another potentially costly concern wind-turbine owners try to avoid. A 2014 report from GCube, estimated that there are 700,000 wind turbine blades in operation globally, with around 3,800 blade-failure incidents per year. According to Sharma, blades have the highest failure rate of any wind-turbine component and the problems are not age related.

The report categorizes the common causes of blade failure, from lightning damage to human error to manufacturing defects.

“As the wind industry looks to attract secondary investments from pension and fund-management communities, blade failure and the associated business interruption costs—exacerbated by the growing cost pressures on manufacturers—can be an unwelcome deterrent,” said Sharma.

He added that it’s important to implement checks and reviews throughout a blade’s manufacturing process, and through transportation and construction. “Ultimately it’s in the interests of all parties to minimize unscheduled downtime, along with the frequency and severity of turbine failures.”
Thorsten Holtz's insight:

Building longer blades presents unique design challenges, which involves re-thinking materials, structure, and other features. For example, a new hybrid carbon and glass-fiber blade was recently commercialized that extends blade length without compromising weight.

No comment yet.
Scooped by MaterialsReview
September 2, 2015 10:46 AM
Scoop.it!

Industrial project moving ahead on long-dormant land in Kewaskum - Milwaukee

Industrial project moving ahead on long-dormant land in Kewaskum - Milwaukee | Multimaterial | Scoop.it

Kraig Sadownikow of American Construction Services is leading an investor group that on Monday bought 20 buildable acres near Highway 45 in Kewaskum for new industrial development.

Buildable lots will be ready by April, bringing activity to a site that village officials have been working on since 2005. Sadownikow, president of West Bend-based American Construction, led the group that bought the bank-owned land for the development.

“It took about a year to put together because it was not a traditional purchase,” Sadownikow said.

Sadownikow said he was approached more than a year ago by some Kewaskum residents who asked he consider taking on the property. The village in 2005 created a tax incremental financing district to spur its construction, but the recession halted any progress in 2008. The property is along Trading Post Lane in the village.

“This TIF district has been a challenge for the village of Kewaskum for quite some time and I am very excited to see this economic development plan move forward, which the Village Board spent many months working on,“ said Kewaskum village president Kevin Scheunemann.

Sadownikow, who also is mayor of West Bend, said he hopes to start moving dirt in spring for the project. He expects to sell the land in lots ranging from 3 to 12 acres for new industrial buildings. The largest buildings could be up to 60,000 square feet, he said. It could attract businesses such as the tool and die, plastic injection and metal stamping manufacturers that populate Washington County now, Sadownikow said. He would also consider offers from developers interested in speculative development.

The village of Kewaskum pledged to spend $230,000 on infrastructure, primarily for an extension of Trading Post Lane, Sadownikow said. In return, Sadownikow is pledging that the land will have a taxable value of at least $2 million by 2019, and $4 million by 2021.

Thorsten Holtz's insight:

The largest buildings could be up to 60,000 square feet, he said. It could attract businesses such as the tool and die, plastic injection and metal stamping manufacturers that populate Washington County now, Sadownikow said. He would also consider offers from developers interested in speculative development.

No comment yet.
Rescooped by MaterialsReview from Best Plastic Injection Molding
August 27, 2015 3:15 AM
Scoop.it!

HuaDa Technology Co. Ltd. embraces state of the art plastic- metal molding techniques

HuaDa Technology Co. Ltd. embraces state of the art plastic- metal molding techniques | Multimaterial | Scoop.it
With wide range of industry-specific fabrication, molding and casting products, HuaDa Technology Company has gained expertise strength in building the reliable yet quality rich plastic metal solutions.


HuaDa Technology is the forerunner company specialized in delivering high durability products like mold fabrication, plastic molding, prototype making, investment casting and design and engineering. The company has extensive machines viz. Wire cutting machines, Mould Fitting Machines, EDM machines, CNC Milling Machines and various kind of Quality control equipment. With in- house mold manufacturing and maintenance capability, the company possesses the talent workforce that develops engineered parts in very short time frame.

Via Mold Fabrication
Thorsten Holtz's insight:

“We have focused approach on latest technology and advance mold making techniques including CAD/CAM/CAE design process, Mold Flow (MPI), Master-cam, AutoCAD, Pro/E, UG, and Solid works design software that remarks our brand success. “ said by one of the production manager at HuaDa Technology Co. Ltd.

No comment yet.
Scooped by MaterialsReview
August 21, 2015 7:32 AM
Scoop.it!

Funktionaler Leichtbau-Nussknacker weist den Weg

Funktionaler Leichtbau-Nussknacker weist den Weg | Multimaterial | Scoop.it
Damit Kunststoffprodukte den steigenden Ansprüchen der Anwender gerecht werden, müssen sie nicht nur kosteneffizient in hoher Qualität zu produzieren sein, sondernauch verschiedene Funktionen in sich vereinen. Auf der Hybrid Expo 2015 demonstriert Sumitomo (SHI) Demag die Weiterentwicklung des auf der Fakuma 2014 präsentierten Herstellungsprozesses hybrider Bauteile in einer kompakten Fertigungszelle.
Thorsten Holtz's insight:

Von der Automobiltechnik bis hin zur Unterhaltungselektronik ist Funktionsintegration ein wichtiger Entwicklungsschwerpunkt. Durch die Zusammenführung verschiedener Funktionen in einem Bauteil erschließen sich Kunststoffprodukten immer anspruchsvollere Aufgabengebiete. Zudem werden die Erzeugnisse durch die Integration stetig leichter und tragen damit zu einem effizienten Umgang mit Ressourcen bei. Bei der Herstellung derartiger Produkte spielt die Spritzgießtechnik eine sehr wichtige Rolle. Nur durch hoch automatisierte und qualitativ hochwertige Produktionslösungen kann eine ressourcenschonende und kostengünstige Fertigung realisiert werden.

No comment yet.
Scooped by MaterialsReview
August 18, 2015 8:57 AM
Scoop.it!

BioKnit: A New Type Of Shoe - Circulate

BioKnit: A New Type Of Shoe - Circulate | Multimaterial | Scoop.it

330 million pairs of shoes are currently sold in the UK each year. Most will head to landfill at the end of use, taking approximately 50 years to decompose. The recyclability challenge is significant, shoes are multi-material products sometimes constructed using 60 discrete parts from a number of 350 possible making processes.
BioKnit is a shoe was inspired by biomimicry principles and is produced by 3D-printing with textiles. Designer Ammo Liao has created a shoe without using composites using different layering to create several different properties simultaneously, including softness, flexibility and strength.

It’s an interesting piece of experimentation. In the natural world, complex mixes of polymers are rare and 3D-printing is a new piece of manufacturing technology that makes single-material layering and consequently emulation of nature possible. Of course, the product in its current form doesn’t necessarily solve the issue that shoes have a relatively short lifespan and economically viable processes for the breaking down and recycling of textiles are not common. However, in the BioKnit shoe, Liao has designed a product that proves that single material use is possible.

No comment yet.
Scooped by MaterialsReview
August 12, 2015 2:31 AM
Scoop.it!

Regulations impact California rubber firms

Regulations impact California rubber firms | Multimaterial | Scoop.it
CERRITOS, Calif.—There's little doubt that what irks rubber company executives in California more than anything else is the state's regulatory environment.
Thorsten Holtz's insight:

Chris Mazelin, marketing manager for Specialty Silicone Fabricators Inc., said his firm has operations in Tustin and Paso Robles. When it added a clean room in Tustin that utilized a dipping process, it was required to install an incinerator outside the building. “The dipping operations are significantly larger in Paso Robles than in Tustin,” he said. “We utilize basically the same chemicals, but we don't have to have a burner on the outside of the Paso Robles building.”

Martin said the SCAQMD ends at the mountains, so firms on the other side of the line, even though they're in Los Angeles County, don't have to follow the same regulations. But as rules spread outward to other parts of the country, “it makes California more in line competitively.”

Other sticking points include agencies and departments issuing conflicting orders, as well as inspectors seeming to come in without proper knowledge, just figuring they'll find something to act upon.

No comment yet.
Scooped by MaterialsReview
August 10, 2015 7:05 AM
Scoop.it!

DuPont Automotive survey: Aluminum, multi-material solutions

Plastics Today
DuPont Automotive survey: Aluminum, multi-material solutions head ...
Plastics Today
Meanwhile, multi-material solutions proponents fell slightly for 21% to 19% of respondents.
Thorsten Holtz's insight:

Aluminum heads the list of materials that the auto industry is turning to in order to meet 2025 CAFE (Corporate Average Fuel Economy) standards according to the annual Wards Auto survey, sponsored by DuPont Automotive. 33% of respondents cited this material compared to 32% in the 2014 survey. Meanwhile, multi-material solutions proponents fell slightly for 21% to 19% of respondents. Engineering plastics and advanced high-strength steel comprise the second tier of material strategies. Further, respondents continued to express "moderate confidence" that today's materials are sufficient to meet the future standards.

No comment yet.
Scooped by MaterialsReview
July 29, 2015 7:33 AM
Scoop.it!

ContiTech expands operations across globe

ContiTech expands operations across globe | Multimaterial | Scoop.it
HANOVER, Germany—ContiTech is expanding its operations in Europe and China to handle growth in both regions.
Thorsten Holtz's insight:

Meanwhile, the company is in the process of acquiring Waltershausen, Germany-based Knapheide GmbH Hydraulic Hoses from the Knapheide Group for an undisclosed amount to expand its capabilities in the hydraulic hose sector, according to a company spokeswoman.

The purchased firm's 90 employees will be retained by ContiTech, she said.

Both property and modern machinery are part of the purchase, she said, but did not expand on that. Approval by German antitrust authorities is needed before the deal can close.

Knapheide's hose factory is located in close proximity to a ContiTech plant in the area, the spokeswoman said.

No comment yet.
Scooped by MaterialsReview
July 14, 2015 3:08 AM
Scoop.it!

EOS and GF Machining target moldmaking in strategic cooperation

EOS GmbH (Krailling, Germany), a global developer of high-end additive manufacturing (AM) solutions for metal 3D printing, has entered into a strategic cooperation with GF Machining Solutions (Schaffhausen, Switzerland) focusing on the mold and die...
Thorsten Holtz's insight:

AM technology allows users to generate metal inserts with cooling close to the surface of the mold (conformal cooling), thus shortening the mold-cooling sequence and accelerating the plastic injection cycle.

"The cooperation allows us to increase value for customers by integrating conventional and additive technologies," says EOS founder and CEO, Dr. Hans J. Langer. "This is a large step toward seamless production, and we join forces with a strong and experienced partner."

No comment yet.