Your new post is loading...
Your new post is loading...
|
Scooped by
Gust MEES
|
The Dutch couple pays €800 ($960) rent per month to live in the future.
|
Scooped by
Gust MEES
|
New printing technique uses cells and molecules to recreate biological structures (Nanowerk News) Researchers from Queen Mary University of London have developed a printing technique using cells and molecules normally found in natural tissues to create constructs that resemble biological structures.
These structures are embedded in an ink which is similar to their native environment and opens the possibility to make them behave as they would in the body.
This allows the researchers to observe how cells work within these environments and potentially enables them to study biological scenarios such as where cancer grows or how immune cells interact with other cells, which could lead to the development of new drugs.
Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?&tag=3D+Bioprinting https://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?&tag=3D-Printing
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
Nature Materials, Harvard University researchers announced they’ve created the first 3D-printed heart-on-a-chip capable of collecting data about how reliably a heart is beating.
The printed organ is made of synthetic material designed to mimic the structure and function of native tissue. It is not designed to replace failing human organs, but it can be used for scientific studies, something that is expected to rapidly increase research on new medicine. The medical breakthrough may also allow scientists to rapidly design organs-on-chips to match specific disease properties or even a patient’s cells. Learn more / En savoir plus / Mehr erfahren: http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D-Printing
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
3D printing technology has been progressing at a fairly steady pace for the past few years, but now, thanks to California-based startup Carbon3D, the technology is about to take a massive leap forward.
|
Scooped by
Gust MEES
|
Japanese scientists say they're well on the way to creating custom-made skin, bone, cartilage and joints using 3D bioprinting technology. The process combine...
|
Scooped by
Gust MEES
|
3D printing has been providing various forms of prosthetic devices such as fingers, hands, arms and legs for a short time now, mostly due to the fact that it is affordable, easy to use, faster than traditional manufacturing, and provides for total customization. Companies are also really beginning to see the potential of 3D printing in the rapid prototyping of medical products.
Learn more:
- http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
Amazon's 3D printing store lets users tweak pre-existing designs and order the product online. More than 200 different designs are available on the site.
|
Scooped by
Gust MEES
|
|
|
Scooped by
Gust MEES
|
The plan to 3D-print a bridge in mid-air was always bonkers. How could a technology best known for creating flimsy prototypes and personalized action figures be used for permanent construction projects? Well, the team at MX3D in Amsterdam just answered all of the hard questions and revealed it: the world’s first 3D-printed bridge. It’s made of a completely new type of steel, spans 40 feet, and will be installed early next year in De Wallen, the largest and best-known red-light district in Amsterdam. It also looks utterly otherworldly.
|
Scooped by
Gust MEES
|
This AI software dreams up new designs for 3-D-printed parts before your eyes Desktop Metal’s new software lets regular people design objects optimized for 3-D printing, no experience required.
The news: Desktop Metal’s new LiveParts is a piece of software that automatically generates designs of objects ready for 3-D printing. Users just tell it the structural constraints of the object they’re building, and it uses biology-inspired AI models to quickly generate a design suited to additive manufacturing.
Better components: The software ensures that parts take advantage of 3-D printing’s capabilities. “This would enable weight reductions between 25 and 60 percent of many kinds of general-purpose parts,” says Desktop Metal CEO Ric Fulop, “while spreading loads more evenly and improving fatigue resistance.”
3-D printing for the masses? Desktop Metal says the software is easy to use even if you have no experience designing parts for additive manufacturing. That could help move 3-D printing closer to being able to create whatever you need, whenever you need it—no engineering degree required.
Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?&tag=3D-Printing
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
Doctors perform hundreds of thousands of knee surgeries every year, often to replace damaged or worn cartilage. The techniques for performing these surgeries today may be about to change, thanks to new research.
In the not-too-distant future, orthopedic surgeons may simply draw new cartilage inside your knee, using a 3D printing, stem-cell-extruding device called the "BioPen."
SEE ALSO: Should we 3D print a new Palmyra? Here's what it means to recreate a city destroyed by ISIS.
The device is still in the research and development stage and not yet approved for medical use, but it's an example of how 3D printing technologies may usher in new ways of treating common human ailments.
In a study published last month in the journal Biofabrication, scientists from the Australian Research Council’s Center of Excellence for Electromaterials Science (ACES) detailed experiments with their custom-built, 3D printing pen, known as the BioPen, a device they’ve been working for almost three years.
Its new capability, though, is what they're calling a breakthrough: the ability to effectively print viable human stem cells into damaged joints to regrow cartilage.
The pen was developed by Peter Choong, director of orthopedic Learn more / En savoir plus / Mehr erfahren: http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D-Printing
|
Scooped by
Gust MEES
|
While we still don't have a 3D printer in every home, use of the technology in medicine is becoming increasingly vital. 3D-printed implants made to perfectly fit the patient have a significant medical benefit, as one Australian doctor has demonstrated.
In late 2015, Ralph Mobbs, a neurosurgeon at the Prince of Wales Hospital in Sydney, met a patient who suffered from a virulent form of cancer known as chordoma.
SEE ALSO: Scientists are getting closer to 3D printing you a new ear if you lose one
The patient, who is in his 60s, had a tumour in a particularly hard-to-get-to location, Mobbs told Mashable Australia. "At the top of the neck, there are two highly-specialised vertebrae that are involved in the flexion and rotation of the head. This tumour had occupied those two vertebrae," he said.
Without treatment, the tumour can slowly compress the brain stem and spinal chord, causing quadriplegia. "It's a particularly horrible way to go," Mobbs said.
Learn more:
- http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D
|
Scooped by
Gust MEES
|
The world is still trying to figure out why every home would need a 3D printer, but in the professional world they continue to thrive. At the International Dental Show currently going on in Germany, Stratasys announced a new 3D printer that uses multiple materials at once to create startlingly realistic dental models in a single print run.
Learn more:
- http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
Following the example of Tokyo, Taipei, Berlin and Barcelona, a new café has just opened in Shoreditch, East London, catering specifically to 3D enthusiasts. Here at MakersCafe, customers can not only meet fellow 3D printing enthusiasts to discuss designs or innovations, but they can also design and print their own creations.
Learn more:
- http://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?tag=3D
|
Scooped by
Gust MEES
|
|
The Dutch couple pays €800 ($960) rent per month to live in the future.
Learn more / En savoir plus / Mehr erfahren:
https://www.scoop.it/t/21st-century-innovative-technologies-and-developments/?&tag=3D-Printing