Raspberry Pi
752.1K views | +174 today
 
Scooped by F. Thunus
onto Raspberry Pi
Scoop.it!

Arduino-based GPS/GLONASS module links to Googlemaps - ElectronicsWeekly.com

Arduino-based GPS/GLONASS module links to Googlemaps - ElectronicsWeekly.com | Raspberry Pi | Scoop.it
Arduino-based GPS/GLONASS module links to Googlemaps ElectronicsWeekly.com This is the second version of the firm's OpenTracker system, which is an open source commercial grade GPS/GLONASS vehicle tracker that comes with a free web interface for...
more...
No comment yet.
Raspberry Pi
A complete ARM GNU/Linux computer for $25.
(also covering Arduino and BeagleBone)
Curated by F. Thunus
Your new post is loading...
Your new post is loading...
Scooped by F. Thunus
Scoop.it!

Dear reader,

Dear reader, | Raspberry Pi | Scoop.it

The Raspberry Pi project website is http://www.raspberrypi.org/

This is one of my news digests. If you like my editorial choices, there are more to be found by clicking on the "dear reader" link, and on my name above.
Enjoy !

more...
Dawn Hewitson's curator insight, February 10, 2014 4:43 AM

Looking forward to having a go at some of the projects on here

Donald Thomas's curator insight, August 30, 2014 8:07 AM

this is 

Wuzea Recherche's comment, March 15, 2015 6:45 AM
Propose de rechercher une ressource en tapant un mot clé dans le champ de recherche. Wuzea : http://www.wuzea.com
Scooped by F. Thunus
Scoop.it!

Simplest ESP8266 Local Time Internet Clock With OLED: 4 Steps (with Pictures)

Simplest ESP8266 Local Time Internet Clock With OLED: 4 Steps (with Pictures) | Raspberry Pi | Scoop.it
I was looking for a straightforward clock to use with a 128x64 OLED I got from Adafruit but found that a lot of the implementations were too cumbersome, involved a ton of code, weren't clear on what NTP servers to use and how, and basically offered very little in terms of making a clock with the LOCAL time (not UTC, which is easy enough to get). So I set about doing my own research and ended up with this simple clock that leverages already made libraries to minimize the code footprint, while offering some interesting tweaks in displaying the time (like AM/PM, 12-hour format, names for months, days, etc). This instructable assumes you have some experience programming ESP-01s but if not, there are a ton of wonderful tutorials available on Instructables! Enjoy!
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

SemiWiki.com - A Self-Contained Software-Driven Prototype

SemiWiki.com - A Self-Contained Software-Driven Prototype | Raspberry Pi | Scoop.it
You’re building an IP, subsystem or SoC and you want to use a prototype together with a software testbench to drive extensive validation testing. I’m not talking here about the software running on the IP/SoC CPU(s); what I mean is the testbench you want to use to wrap around the whole system. This is a very common requirement. An obvious conclusion is to hook the prototype up to a host PC, run your testbench there and connect to the prototype through one of the standard interfaces.
19636
But there’s a problem. Your real design probably has all kinds of communication interfaces to the rest of the system to which it will ultimately connect, yet you’re constrained to pushing all that testbench activity through a relatively narrow pipe between the prototype and the PC. Wouldn’t it be nice to have wider and more realistic channels to connect the testbench to the DUT?
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

New developer kit helps secure IoT devices

New developer kit helps secure IoT devices | Raspberry Pi | Scoop.it
The rapid growth in numbers of IoT devices has seen them become a favored attack route for cyber criminals. This has left companies looking for a way to integrate strong security into millions of devices.
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Georgia Tech system reduces robot-programming to a couple of clicks

Georgia Tech system reduces robot-programming to a couple of clicks | Raspberry Pi | Scoop.it
If grasping-armed robots are ever going to be widely used for applications such as assisting seniors in their homes, then they’ll have to be easy to program. And unfortunately, programming mo…
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Internet of Things Toilet Uploads Events to the Cloud (Raspberry PI): 7 Steps (with Pictures)

Internet of Things Toilet Uploads Events to the Cloud (Raspberry PI): 7 Steps (with Pictures) | Raspberry Pi | Scoop.it
Internet of Things Toilet uploads flush events and toilet paper roll change out events to Google Drive spreadsheet.How does it work? – An aquarium liquid level sensor float switch detects toilet tank level; flushing lowers the level closing the switch. A photo cell located in socket (blind hole) of the toilet paper holder spindle mounting arm detects when the spindle is removed to change out the toilet paper (letting light hits the photo cell, thus "closing the switch"). Signals from these two sensors are sent (wirelessly - despite what the intro photo implies) via a hacked two button key fob; that is, sensor switch closure effectively pushes a button. A 315 MHz receiver module connected to a Raspberry Pi receives switch closure signals.The Raspberry Pi, using Python API gspread, transmits the event data to Google Drive spreadsheet.See system layout image.How hard and how much $ ? - Assuming you alread
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Huawei, Google supercharge Android with new Raspberry Pi-like board

Huawei, Google supercharge Android with new Raspberry Pi-like board | Raspberry Pi | Scoop.it
The HiKey 960 will be the go-to computer board for Android and will sell for US$239
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Bluetooth Controlled Arduino LED Coffee Table: 9 Steps (with Pictures)

Bluetooth Controlled Arduino LED Coffee Table: 9 Steps (with Pictures) | Raspberry Pi | Scoop.it
This was my first real Arduino project and is also my first instructable so be kind in the comments :) I wanted to try and answer the questions that took me some time to figure out and provide detailed instructions so if you're very familiar with hobbyist electronics then you can probably skim through each step but if you're new to this it should provide you with everything you need.The aim of the project was to create a 12 x 12 pixel screen in a coffee table that can be controlled via bluetooth and used as a cool room light/play games on it.For this build you will need these parts: Arudino Mega (or clone) - https://www.amazon.co.uk/Arduino-Mega-2560-R3-Micr... Arduino micro SD Card Shield (I used this one and and soldered the headers on) - https://www.sparkfun.com/products/12761 Micro SD card - Any size will do but it must be formatted in FAT32 5m WS2812
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

EWaste 60$ 3DPrinter: 11 Steps (with Pictures)

EWaste 60$ 3DPrinter: 11 Steps (with Pictures) | Raspberry Pi | Scoop.it
This project describes the design of a very low budget 3D Printer that is mainly built out of recycled electronic components. The result is a small format printer for less than 100$.First of all, we learn how a generic CNC system works (by assembling and calibrating bearings, guides and threads) and then teach the machine to respond to g-code instructions. After that, we add a small plastic extruder and give an overview on plastic extrusion calibration, driver power tuning and other few operations that will bring the printer to live. Following this instructions you will get a small footprint 3D Printer that is built with about an 80% of recycled components, which gives it a great potential and helps to reduce the cost significantly.On one side you get an introduction to machine building and digital fabrication and on the other side you get a small 3D Printer built out o
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

DIY an Arduino Scanning Thermometer

DIY an Arduino Scanning Thermometer | Raspberry Pi | Scoop.it
Using an Arduino Nano and two rotary stages, this Maker hacked together a panoramic thermal imaging camera. After ordering and finally receiving an infrared
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Apple was 41 years old in April, here's some history

Apple was 41 years old in April, here's some history | Raspberry Pi | Scoop.it
Our huge, comprehensive rundown of Apple's history will take you from its origins in the 1970s, Jobs' departure and later return to Apple. Follow the Apple story with us!
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Open-spec networking Mini-ITX has 1, 2.5, and 10 GbE ports

Open-spec networking Mini-ITX has 1, 2.5, and 10 GbE ports | Raspberry Pi | Scoop.it
SolidRun’s "Marvell MacchiatoBIN" is a $349, Mini-ITX networking SBC that runs Linux 4.4 on Marvell’s quad -A72 Armada 8040, and supports ODP, OFP, and NFV.
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Web Controlled 8-Channel Powerstrip: 8 Steps (with Pictures)

Web Controlled 8-Channel Powerstrip: 8 Steps (with Pictures) | Raspberry Pi | Scoop.it
Greetings, fellow Raspberry Pi enthusiasts.  We are about to create a multi-purpose gadget that is sure to impress!  My primary reason for building this to to control my Christmas lights, but that is only one of many possible uses.  Basically you can plug in up to 8 appliance and turn them on and off independantly from your smart phone!  If you want to setup port-forwarding on your wireless router, you can control your appliances from anywhere in the world.  (Although why you would want to turn on your blender from over-seas is a bit of a mystery.) Please leave me a comment letting me know how you use your Web Controlled Powerstrip! Before we get started, I want to give credit where credit is due: TheFreeElectron wrote an excellent instructable on controlling the Raspberry Pi GPIO pins from a web-browser. In fact, in-order to complete this instructable, you will need t
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

RPI3 2600 (raspberry pi 3 enclosure) #3DPrinting #3DThursday

RPI3 2600 (raspberry pi 3 enclosure) #3DPrinting #3DThursday | Raspberry Pi | Scoop.it
The latest on the Internet of Things (IoT). IoT is a concept of having everyday devices connected, sharing and communicating data and information.
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Arduino Time-Lapse Panorama Controller: 7 Steps (with Pictures)

Arduino Time-Lapse Panorama Controller: 7 Steps (with Pictures) | Raspberry Pi | Scoop.it
Panorama Controller for GoPro CamerasThe controller will rotate your GoPro over a set angle for a set duration or will rotate you GoPro for a full rotation for a set duration.This project is based on the original instructable by Tyler Winegarner See instructable here and also from Mark Wheeler's version of Tyler Winegarner's instructable See Mark Wheeler's instructable here or his web site here .My instructable combines software and hardware from both versions as well as adding some different build and control options of my own. further details on my web site.I have added code for a 4x20 I2C LCD display and switches rather than the SainSmart LCD Keypad Shield. I have also removed the Arduino UNO shield and replaced it with an Arduino Atmega 328 mounted on vero board. Full schematics and vero board layouts included.The Arduino controls a Geared Stepper Motor 28BYJ-48 via a ULN2003 Stepper Motor Drive
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Top 5 Facts About Tails OS

Top 5 Facts About Tails OS | Raspberry Pi | Scoop.it
When it comes to being secure on the internet, users can take many different precautions. Those users who are slightly more
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Huawei Launches HiKey 960 Computer Board For Android

Huawei Launches HiKey 960 Computer Board For Android | Raspberry Pi | Scoop.it
The Raspberry Pi boards are great if you like to tinker around with technology. The possibilities are endless with the board bu
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Low-Latency Live Wireless Flight Video on all your devices (And YouTube Live Streaming it)

Low-Latency Live Wireless Flight Video on all your devices (And YouTube Live Streaming it) | Raspberry Pi | Scoop.it
From: http://dalybulge.blogspot.co.uk/2017/04/low-latency-wireless-video-on-all-your.html
Today I discovered that I am able to have super low-latency Wireles…
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Fingerprint Lock - Unbreakable Garage Door (Electronic and Mechanic System): 6 Steps (with Pictures)

Fingerprint Lock - Unbreakable Garage Door (Electronic and Mechanic System): 6 Steps (with Pictures) | Raspberry Pi | Scoop.it
This system is quite complex, I will do my best to make it simple to understand and, for those who have the courage, I tried to put as much details on the photos.(PS: I'm a french teenager, I hope my English is not to bad :)
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Use Homie Firmware to Drive Sonoff Switch Module (ESP8266 Based): 5 Steps (with Pictures)

Use Homie Firmware to Drive Sonoff Switch Module (ESP8266 Based): 5 Steps (with Pictures) | Raspberry Pi | Scoop.it
This is a followup instructable, I've written this one a bit after "Building Homie Devices for IoT or Home Automation". The later was focusing on basic monitoring (DHT22, DS18B20, light) around D1 Mini boards.This time, I'd like to show how to add a serial header for FTDI adapter on a Sonoff WiFi Wireless Smart Switch and flash Homie for ESP8266 to the Sonoff device. Using a Homie firmware, the device can be controlled over MQTT and the button will turn relay on/off.Oh, this Sonoff device is a ESP8266 powered from AC (90-250V 10A) and controlling a relay for AC output. It also has a LED and a button. If you need 16A look at Sonoff TH10/TH16: Temperature and Humidity Monitoring WiFi Smart Switch for instance. They have a whole range.There are quite a lot of hacks available for the Sonoff. This range from this simple "add a serial header" t
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Homemade Fidget Spinner: 6 Steps (with Pictures)

Homemade Fidget Spinner: 6 Steps (with Pictures) | Raspberry Pi | Scoop.it
Do you get stress out while working or you fidget a lot when you are sitting idle? If yes, then you definitely need this homemade fidget spinner which can help you in overcoming your stress and can also acts as a great toy for killing time. This spinner also helps you in building up concentration and in relaxing when you are tired. With this cute little spinner, you can also do some tricks. Your siblings and friends would be fascinated when they see this spinner in your hand. You can also buy a spinner from the market, but those spinners are sold above $1 and are made up of plastic whereas this spinner is made up of wood and the build cost of it is around 0.42 dollars or INR 30. Telling about the materials, this spinner is completely made up of wood and the ball bearing used is mad
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

RS Components – Easy to use, credit-card-sized IoT Linux computer comes with built-in wireless connectivity | Electropages

RS Components – Easy to use, credit-card-sized IoT Linux computer comes with built-in wireless connectivity | Electropages | Raspberry Pi | Scoop.it
RS Components has announced availability of the latest member of the BeagleBone Black family of computer boards – the BeagleBone Black Wireless
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Super Simple Raspberry Pi 433MHz Home Automation: 7 Steps

Super Simple Raspberry Pi 433MHz Home Automation: 7 Steps | Raspberry Pi | Scoop.it
This tutorial is one among many when it comes to using a Raspberry Pi to control wireless devices around the home. Like many others, it will show you how to use a cheap transmitter/receiver pair hooked up to your Pi to interact with devices operating on the commonly used 433MHz radio frequency band. It will specifically show you how to turn any electrical device on or off using your Pi by transmitting commands to a set of 433MHz remote-controlled power sockets.Why did I create this tutorial if so many already exist? Mainly because pretty much all the other tutorials I came across seemed to overcomplicate things, especially on the software side. I noticed that they relied heavily on third-party libraries, scripts or code snippets to do all the work. Many wouldn't even explain what the underlying code was doing - they would just ask you to shove two or thre
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Raspberry Pi 3 gets Android TV ROM - GoAndroid

Raspberry Pi 3 gets Android TV ROM - GoAndroid | Raspberry Pi | Scoop.it
Android TV, who is not in love with the this Android variant? Well, now users who use the single board computer, Raspberry Pi 3 can use it by installing th
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

How to 3D Print Anything (Even If You Don’t Own a 3D Printer)

How to 3D Print Anything (Even If You Don’t Own a 3D Printer) | Raspberry Pi | Scoop.it
There are plenty of reasons you might want to 3D print something, but few that justify owning one. You could print anything from a custom GPS mount for your bike to Dungeons & Dragons miniatures to wearable armor for your next Star Wars cosplay. Unless you’ll be printing a ton of stuff on the regular, though, none of them are worth the hundreds you’d need to spend for a 3D printer (or the thousands you’d spend on a really good one).
more...
No comment yet.
Scooped by F. Thunus
Scoop.it!

Display a TextBox only when a Radio Button is Checked

Display a TextBox only when a Radio Button is Checked | Raspberry Pi | Scoop.it
arduino electronics projects for home, ham radio, model railroading and more.
more...
No comment yet.