|Scooped by Thomas|
Building a Shed Ramp Today!
http://howtobuildashedeasily.com ← Click link to visit my Blog, for great article and video's to FREE Shed Plans and Step by Step detailed Instructions..
If you have built a storage shed using our professional shed blueprints as a guide, you may be taking into consideration the extra touches that can help to increase the value of assembling your project. The, adding a shed ramp might be a necessary step. Although your shed might be accessible that don't have them, a ramp will add safety, convenience, and a simple strategy to move heavier items without risking compensation for injuries.
While there are numerous ways to make a shed ramp, the fundamentals stay. Stringers, or support members, are secured towards the face with the shed, underneath the door. These stringers run at the downward angle from your door opening to the ground, which determines the angle of the shed ramp. An appropriate material, including 5/4 decking boards, are secured to the stringers to create the actual top of the ramp.
No matter the ramp design, it's recommended that pressure treated lumber or composite decking material be used for construction. Here are several additional details on the way to create a shed ramp:
The Ledger Board.
The ledger board will likely be securely fastened to the face with the shed, underneath the door opening. This ledger will be utilized for a surface to lock the required quantity of stringers. When the ledger board as been installed, metal joist hangers enable you to support the stringers, or a smaller board can be fastened straight away to the ledger which will secure the stringers from underneath.
Stringers for your shed ramp needs to be pressure treated, 2"x4" or 2"x6" material, spaced at at most 16" on center. Angles for either end of the stringers may count on temporarily holding one stringer set up, and utilizing a square to transcribe a pencil line for the material. After a single stringer continues to be properly cut it is a template to the remaining pieces. When determining your angle, it often helps you to run a string from the finished shed floor, to the estimated base or beginning of your garden storage ramp.
Understand that when installing stringers onto the ledger, you'll need to make allowances for your thickness of your respective deck boards or another finish material. This can keep your shed door will close, understanding that the decking will probably be flush together with the shed floor.
Shed Ramp Base
The stringers for the shed ramp should rest with a firm base so that you can provide stability and prolong the life from the ramp. Using concrete patio blocks put on basics of crushed stone provides a simple solution. After you have determined the bases location, dig a shallow hole roughly 4" deep, compact the earth, cover by having an even layer of crushed stone, and install and level the essential amount of patio blocks.
The most effective material to use when building your shed ramp, is standard 5/4" pressure treated decking. This fabric will run parallel for the shed door, the complete opposite of how your stringers were installed. Using traditional decking provides for drainage so helping use a solid surface. Use exterior decking screws to secure your 5/4" material. While decking nails is going to do fine, screws permits easy disassembly if repairs become necessary.
Once you have completed constructing a shed ramp, it's wise to utilize self adhesive traction strips, or apply a coating which helps to generate a no-slip surface.