Canon Phone number
13.2K views | +2 today
Follow
Canon Phone number
Techbuddiesonline. Inc provide technical support for canon printer. you can call us and ask for help on +1-855-517-2433 (Toll Free)
Curated by peter smith
Your new post is loading...
Your new post is loading...
Scooped by peter smith
Scoop.it!

Canon mp230 error code 1403

Canon mp230 error code 1403 | Canon Phone number | Scoop.it
Do not touch the electrical contacts (A) or print head nozzle (B) on a FINE cartridge. The machine may not print properly if you touch them. Call us +1-855-517-2433 (Toll Free)
peter smith's insight:
This error generally known as error code 1403 or u052 indicates Ink Cartridge temperature sensor error in your canon mp230 printer.
more...
No comment yet.
Scooped by peter smith
Scoop.it!

Canon Mp230 error code 1300

Canon Mp230 error code 1300 | Canon Phone number | Scoop.it
This error generally known as error code 1300 indicates Paper Jam in your canon mp230 printer.
peter smith's insight:
If you need to turn off the machine to remove jammed paper during printing, press the Stop/Reset button to cancel print jobs before turning off the machine. Paper Is Jammed in the Paper Output Slot or the Rear Tray: Remove the paper following these steps: Step 1: Pull the paper out slowly, either from the rear tray or from the paper output slot, whichever is easier. Call us +-1855-517-2433 (Toll Free)
more...
No comment yet.
Scooped by peter smith
Scoop.it!

Printer is offline and cannot print even though the printer is on and other devices print to it

Since its working sporadically, I’m wondering if it is set up to use the correct port.  I’ve seen some cases where when it uses a built in port for WSD it will print erratically, but when we switch it over to the dedicated Canon port everything works fine.  Let's try the following:

peter smith's insight:

1.  Click Start.

 

2.  Click Control Panel.

 

3.  Click Hardware and Sound.

 

4.  Click Devices and Printers.

 

5.  Right click the PIXMA MX892 Printer and click Printer Properties.

 

6.  Click the Ports tab.

 

7.  Make sure that the checkmark is on the port that starts with CNBJNP, then click OK and try to print. Read More

 

If you have further question related to mx892 post question here ( )

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Pixma MX410 work wirelessly Blue light is on, but computer says it's offline

Pixma MX410 work wirelessly Blue light is on, but computer says it's offline | Canon Phone number | Scoop.it
peter smith's insight:

For the best wireless communication conditions possible, we will want to ensure that the network devices are suitably located.  To do this, please ensure the following:

 

1.  The access point is located indoors within the effective range for wireless communication; this would be within 50 meters of the access point.

 

2.  There are no obstructions blocking wireless communication.  Wireless communication between different rooms or floors is generally poor.  If possible, adjust the location of the devices so that the wireless router is as close to the printer as possible.

 

3.  There is no source of radio wave interference in your vicinity.  There may be a device such as a microwave oven using the same frequency bandwidth as the wireless station.  Place the wireless devices as far away from the interference source as possible.

 

I hope this helps -- if you still experience difficulty, please feel free to contact a technical support representative at 1-855-517-2433

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Wireless connection for PIXMA MG3220

Wireless connection for PIXMA MG3220 | Canon Phone number | Scoop.it
peter smith's insight:

You have tried to follow the various steps for setting up of wifi for the PIXMA MG3220 printer. If you have at&t wireless internet. you have the printer right next to the 'access point' (literally), and it still cannot find the wireless network. If you have a MAC OS X 10.6 laptop.

 

Sometimes our software can be blocked by other programs, but if the printer is already on the network, you may be able to simply add it via the Print and Fax window.  Try these steps and see if it helps:

 

1.  Click the Apple Menu.

 

2.  Click System Preferences.

 

3.  Click Print and Fax.

 

4.  Highlight the MG3220 on the left, then click the - in the bottom left corner to remove it.  Repeat this process as many times as necessary to remove the printer from the list.

 

5.  Once all MG3220 entries have been removed, click the + in the bottom left corner to open the Add Printer window.

 

6.  It may take up to a minute, but the MG3220 should appear with a string of numbers after it.  Highlight this entry and click Add, then try printing again. If the printer not connected to wireless network contact us +1-855-517-2433 (Toll Free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

error message canon mx700 printer

error message canon mx700 printer | Canon Phone number | Scoop.it

Massage

 

Some ink tanks are not installed in place."

 

U072

 

"More than one ink tank of the following color is installed."

 

U071

 

Action

 

Possible causes are as follows:

 

Some ink tanks are not installed in the correct position. (The lamp on the ink tank flashes.)

More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)

Confirm that the ink tanks are installed in the appropriate positions.

 

Massage

 

"The remaining level of the ink cannot be correctly detected."

 

U130

 

Action

 

The remaining ink level cannot be correctly detected. (The lamp on the ink tank flashes.)

 

Replace the ink tank and close the Scanning Unit (Printer Cover).

 

Printing with an ink tank that was once empty may damage the machine.

 

If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.

 

If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the LCD when checking the current ink level.

 

Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the ink tank is replaced. Print the fax stored in memory manually after replacing the ink tank. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed.

 

Massage

 

"The following ink tank cannot be recognized."

 

U043

U140

U150

 

Action

 

The ink tank is not installed.

 

Install the ink tank.

 

The ink tank is not compatible with this machine. (The lamp on the ink tank is off.)

Install an appropriate ink tank.

 

An ink tank error has occurred. (The lamp on the ink tank is off.)

 

Replace the ink tank.

 

Massage

 

"The ink has run out. Replace the ink tank."

 

U163

 

Action

 

Ink has run out. (The lamp on the ink tank flashes.)

 

Replace the ink tank and close the Scanning Unit (Printer Cover).

 

Printing under the current condition may damage the machine.

 

If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the Stop/Reset button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

 

If the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the LCD when checking the current ink level.

 

Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the ink tank is replaced. Print the fax stored in memory manually after replacing the ink tank. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed.

 

Massage

 

Error code"

 

Examples: 5B00, 6A80, 5C00, B200, 6502, 6000, 5200, etc.

 

"****" is an alphanumeric code that varies according to the error status.

 

When "5100" or "5110" is displayed

 

(1) Turn off the machine, and lift the Scanning Unit (Printer Cover) to check if there are any foreign objects inside the machine.

 

(2) Move the Print Head Holder (the part that holds the ink tanks) to the right side gently by hand if you can move it manually. Make sure that the ink tanks are securely set in the Print Head Holder.

 

(3) Turn on the machine.

If the same error occurs, follow the instruction in "When other codes are displayed" described below.

 

When other codes are displayed

 

Turn off the machine, and unplug the power cord of the machine from the power supply. After five minutes or more, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, contact your Canon service representative. See More ( )

 

Call us +1-855-517-2433 (Toll Free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

How to delete print queue job to resolve printing errors Mac OS X

If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued jobs.

 

Note: After confirming that the cable is connected and that the printer is powered on, perform the following.

 

Click here for Mac OS X 10.3.x and 10.4.x instructions.

 

In Mac OS X 10.5.x, 10.6.x

 

If you are using Mac OS X 10.5.x or 10.6.x, from the Apple menu click 'System Preferences'.

 

From 'System Preferences', open 'Print & Fax'.

 

From the 'Print & Fax' window, select your printer from the list and then click 'Open Print Queue'.

*Window shown is from 10.5.x

 

Click to select the document to be deleted (document name) from the print queue list in the queue window.

 

Click 'Delete' in the toolbar.

 

Note: If the print job does not complete, it may be necessary to disconnect the printer cable,

power the printer off and on, and then reconnect the cable.

 

Mac OS X 10.3.x and 10.4.x

 

Open 'Applications', and 'Utilities', and double-click the Printer Setup Utility icon.

 

Note: In versions prior to OS X 10.2, double-click the Print Center icon.

 

Select the printer name you are using, in the Printer List.

 

Click to select the document to be deleted (document name) from the print queue list in the queue window.

 

Click 'Delete' in the toolbar.

 

Deleting the accumulated and queued documents in the computer is completed. See More ( )

 

Call us +1-855-517-2433 (Toll Free)

 

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Delete queued print jobs to resolve printing errors (Mac OS X)

Delete queued print jobs to resolve printing errors (Mac OS X) | Canon Phone number | Scoop.it

Delete Queued Print Jobs (Mac OS X)


If a print job is corrupt and does not print clearly, does not print at all or is preventing other

queued jobs from printing, delete the queued jobs.


Note: After confirming that the cable is connected and that the printer is powered on, perform the following.


Click here for Mac OS X 10.3.x and 10.4.x instructions.


In Mac OS X 10.5.x, 10.6.x


If you are using Mac OS X 10.5.x or 10.6.x, from the Apple menu click 'System Preferences'.

From 'System Preferences', open 'Print & Fax'.


From the 'Print & Fax' window, select your printer from the list and then click 'Open Print Queue'.

Window shown is from 10.5.x

Click to select the document to be deleted (document name) from the print queue list in the queue window.

Click 'Delete' in the toolbar.

Note: If the print job does not complete, it may be necessary to disconnect the printer cable, power the printer off and on, and then reconnect the cable.

Mac OS X 10.3.x and 10.4.x


Open 'Applications', and 'Utilities', and double-click the Printer Setup Utility icon.

Note: In versions prior to OS X 10.2, double-click the Print Center icon.

Select the printer name you are using, in the Printer List.

Click to select the document to be deleted (document name) from the print queue list in the queue window.

Click 'Delete' in the toolbar.

Deleting the accumulated and queued documents in the computer is completed. See More ( )

Contact us +1-855-517-2433 (Toll Free)

Window shown is from 10.5.x

Click to select the document to be deleted (document name) from the print queue list in the queue window.

Click 'Delete' in the toolbar.

Note: If the print job does not complete, it may be necessary to disconnect the printer cable, power the printer off and on, and then reconnect the cable.

Mac OS X 10.3.x and 10.4.x

Open 'Applications', and 'Utilities', and double-click the Printer Setup Utility icon.

more...
No comment yet.
Scooped by peter smith
Scoop.it!

How to print on both sides of the paper (Duplex Printing) - Mac

How to print on both sides of the paper (Duplex Printing) - Mac | Canon Phone number | Scoop.it

Duplex Printing

 

The procedure for printing data on both sides of one sheet of paper is as follows:

 

Select Duplex Printing & Margin from the pop-up menu on the Print dialog

 

In the Print dialog, you can set paper type and print quality to start printing.

 

To open the Print dialog, you typically select Print... from the File menu of your application softwar

Set duplex printing

 

Check the Duplex Printing check box.

 

Set the print area

 

When you perform duplex printing, the print area of the document becomes slightly narrower than usual and the document may not fit on one page.

 

If necessary, select one of the processing methods from Print Area.

Set the stapling margin

 

To change the Stapling Side, select a setting from the list, and if necessary, set the Margin width.

 

Complete the setup

 

Click Print.

 

When you execute print, duplex printing will be started.

 

Important

 

When a media type other than Plain Paper is selected from Media Type menu of Quality & Media, Duplex Printing appears grayed out and is unavailable.

 

When borderless printing is set, Duplex Printing appears grayed out and is unavailable.

 

Duplex Printing can be performed only when one of the following paper sizes is selected from Paper Size.

 

US Letter, A4

 

After printing the front page, there is an ink drying wait time before starting to print the back page (Operation stops temporarily). Do not touch the paper during the time. You can change the ink drying wait time from Custom Settings in the Canon IJ Printer Utility.

 

Note

 

If the back side of the paper becomes smudged during duplex printing, display the pop-up menu of Canon IJ Printer Utility, select Cleaning from the menu, and then perform Bottom Plate Cleaning. See More ()

 

Request for service

 

CALL US +1-855-517-2433 (TOLL FREE)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

How to Fix HP Printing Problems

How to Fix HP Printing Problems | Canon Phone number | Scoop.it

 

Hewlett Packard has long been a popular choice for home use and office printers, and HP laserjet, deskjet and photo printers are widely used throughout the world. With the right care and maintenance these printers can provide many years of trouble-free service, but it is important for printer owners to know what to do when something goes wrong. Some basic troubleshooting skills under your belt will help you avoid some big repair bills and keep your printer up and running.

 

Instructions

 

Check the paper path to determine where your printer is jamming. Printer jams can be frustrating, and the first course of action when they occur should be to determine where the paper is jamming. If paper is jamming as it exits the tray, chances are the rollers have worn smooth and will need to be replaced. If the paper is jamming on the left side of the printer, the fuser may need to be reseated. If the jam occurs on the right side, the toner cartridge may not be installed properly.

 

Check the level of your toner cartridge or inkjet cartridge if the print quality is poor. While you should receive a pop-up message or a control panel message when the level of ink is low, this may not always occur. If the print appears to be faded, it is a good idea to install a new toner cartridge if you have a laser printer or a new print cartridge if you have an inkjet or photo printer.

 

Change the fuser cartridge if the print is rubbing off the paper. The fuser is what makes the print stick to the paper, and if that fuser is bad the print will not adhere properly. To replace the fuser cartridge, pull open the left door, flip down the clips that hold the fuser in place, pull the cartridge out and replace it with a new unit.

 

Request for a repair service

 

Contact Techbuddiesonline.com for repair service options

 

CALL US +1-855-517-2433 (TOLL FREE)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Canon mp230 error code 1401

Canon mp230 error code 1401 | Canon Phone number | Scoop.it
When you need to replace ink cartridge or install ink cartridge properly, follow these procedure: Do not touch the electrical contacts (A) or print head nozzle (B) on a FINE cartridge. The machine may not print properly if you touch them. Call us +1-855-517-2433 (Toll Free)
peter smith's insight:
This error generally known as error code 1401 indicates Ink Cartridge not install properly in your canon mp230 printer.
more...
No comment yet.
Scooped by peter smith
Scoop.it!

Canon Mp230 error code 1003

Canon Mp230 error code 1003 | Canon Phone number | Scoop.it
This error generally known error code 1003 and error occurs_29 as indicates No Paper or Paper does not feed properly in your canon mp230 printer. Follow these steps for remove this error in your canon mp230 printer Paper Does Not Feed Properly/"No Paper" Error Occurs_29 Step 1: Make sure of the following when you load paper When loading two or more sheets of paper, flip through the paper before loading. Call us +1-855-517-2433 (Toll Free)
peter smith's insight:
If there are any foreign objects in the rear tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.
more...
No comment yet.
Scooped by peter smith
Scoop.it!

MX892 Keeps losing connection

MX892 Keeps losing connection | Canon Phone number | Scoop.it
peter smith's insight:

I would like to see what link quality and signal strength is being reported by the printer.  Use the following steps to print the LAN Details which will show this information: following

 

1.  Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper

 

2.  Press the Menu button .Select Setup , then press the OK button.

 

3.  Select  Device settings then press the OK button. 

 

4.  Use the  button to select LAN settings, and then press the OK button.

 

5.  Use the  button to select Confirm LAN settings, and then press the OK button. 

 

6.  Use the  button to select Print LAN details, and then press the OK button to confirm the selection.

 

7.  Use the  button to select yes, and then press the OK button to start printing 

 

If you are still able to print consistently from the other computers, the issue may be related to a program the Windows laptop.  Read More ( )

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Why you can't get your MG3100 to print wirelessly

Why you can't get your MG3100 to print wirelessly | Canon Phone number | Scoop.it
peter smith's insight:

It may be possible that more than one copy of the printer was installed.   Uninstalling and reinstalling the drivers should resolve this issue.  Please perform the following:

 

1.  Click Start and open the Control Panel.

 

2.  Open Programs and Features.

 

3.  Uninstall the MG3100/MP Drivers and the Canon IJ Network Tool.

 

4.  Close all windows that are open.

 

Once this has been done, insert the MG3100 Series disk into your computer and reinstall the unit again. 

 

If these troubleshooting steps do not work, feel free to call us at +1-855-517-2433 (Toll free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

software error massage or installation issues

software error massage or installation issues | Canon Phone number | Scoop.it

Restart The Computer

 

Rebooting the computer is a good initial step to begin resolving software or installation issues.

Instructions to restart the computer for Windows and Macintosh operating systems.

 

Click on the appropriate Operating System for instructions to restart the computer: Windows 7, Windows XP, Windows2000/Windows98/WindowsMe, Mac OS 9.x, Mac OS X and Windows Vista.

Note: If an OS other than those listed above is being used, follow the appropriate procedure to turn the PC off as provided by the computer's manufacturer or operating system vendor.

Windows 7

 

Click the Start button.

 

Click the arrow to the right of the Shutdown button .

 

Click 'Restart' from the menu that appears.

 

Windows Vista

 

Click the Start button.

 

Click the arrow to the right of the Lock button.

 

Click 'Restart' from the menu that appears.

 

Windows XP

 

Click Start

 

Select 'Turn Off Computer'

 

Click 'Restart'

 

Windows2000/Windows98/WindowsMe

 

Click Start

 

Select 'Turn Off Computer'

 

Click 'Restart'.

 

Mac OS 9.x

 

Click on the Special

 

Select 'Restart'.

 

Mac OS X

 

Click on the Apple menu (Apple mark)

 

Select 'Restart'.

 

Note: If system trouble prevents restarting the PC, use the power switch to turn the PC off, wait a few moments and then use the power switch to turn the PC on again. If system trouble still prevents the restart of the PC, refer to the computer's manufacturer for further assistance. See More ( )

 

Call us +1-855-517-2433 (Toll Free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Configure the printer driver to correct port for proper communication

Configure driver to correct printer port

 

On the 'Ports' tab of 'Printer Properties' window, select the correct port for the printer driver.

From the Windows desktop, open the printer's properties window.

 

Click the Ports tab.

 

Below 'Print to the following port(s)' section, select the port to which your printer is connected.
Example: In this example, the printer is connected to 'Virtual printer port for USB001'

 

Click 'Apply' to accept the changes.

 

Click General tab and then click 'Print Test Page' to confirm the changes corrected the issue. See More ( )

 

Call us +1-855-517-2433 (Toll Free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Canon printer preference / properties for windows

Canon printer preference / properties for windows | Canon Phone number | Scoop.it

Accessing the Driver Version (Windows)


Access the Printing Preferences / Properties by opening the Printer Properties.


For Windows 7


Click the 'Start' button from the bottom left of the Windows screen, and then click on 'Devices and Printers'.


Click your right mouse button on the listing for your printer, and then select 'Printing Preferences' from the menu that appears.


For Windows Vista


Click / Select the 'Start' from the bottom left of the Windows screen, 'Control Panel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, click 'Printers' directly from the 'Control Panel'.


Click your right mouse button on the listing for your printer, and then select 'Preferences' from the menu that appears. Show all ( )


Call us +1-855-517-2433 (Toll Free)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Cycle power on the printer and Router / Access Point to restore communication

Cycle power on the printer and Router / Access Point to restore communication | Canon Phone number | Scoop.it

If your printer was previously printing (or scanning) via wireless communication but can no longer do so, it may be necessary to cycle the power on the printer and Router / Access Point to restore communication. Before doing this, verify that the computer can communicate with the Router / Access Point.

 

On the printer, press the ON button to power off the printer. Wait about 10 seconds, then press the ON button to power the printer back on.

 

On the Router / Access Point, if there is a power button, press it to turn off the device, then press it again to re-power after waiting for about 10 seconds.* If there is no power button, you may have to disconnect the power cord / AC adapter. Check with the device's user manual.

 

Wireless communication of all devices on the wireless network will be lost while you do this. See More ( )

 

Call us +1-855-517-2433 (TOLL FREE)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

How to print out the LAN settings - Canon MX712

How to print out the LAN settings - Canon MX712 | Canon Phone number | Scoop.it

Check the LAN Settings

 

Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper.

 

Press the Menu button

 

Select Setup , then press the OK button.

 

Select Device settings, then press the OK button.

 

Use the button to select LAN settings, then press the OK button.

 

Use the button to select Confirm LAN settings, then press the OK button.

 

Use the button to select Print LAN details, then press the OK button to confirm the selection.

 

Use the button to select Yes, then press the OK button to start printing.

 

The machine starts printing the network setting information. See More ( )

 

Request for service

 

CALL US +1-855-517-2433 (TOLL FREE)

more...
No comment yet.
Scooped by peter smith
Scoop.it!

Making Copies - MG2120 / MG3120

Making Copies - MG2120 / MG3120 | Canon Phone number | Scoop.it

Load the original on the platen glass to copy.

 

Make sure that the machine is turned on.

 

Confirming that the Power Is On

 

Load paper.

 

Loading Paper

 

Load the original on the platen glass.

 

Loading Originals

 

Press the Paper button repeatedly to select the page size and media type according to the paper loaded in step 2.

 

The Paper lamp indicates the selected page size and media type.

 

Note

 

You can select the following page sizes and media types.

 

A4 or 8.5" x 11" Plain Paper

 

A4 or 8.5" x 11" Photo Paper

 

10 x 15 cm or 4" x 6" Photo Paper

 

You can switch the size of paper loaded in the front tray between A4 and 8.5" x 11" (Letter) regardless of the size indicated on the operation panel.

 

Switching the Page Size between A4 and Letter

 

When the Fit-to-Page copy function is enabled, you can copy the original in the size automatically enlarged or reduced to fit the selected page size. In this case, the original is copied with borders on the plain paper and without borders on the photo paper. Cancel the Fit-to-Page copy function to copy the original in the same size.

 

Reducing or Enlarging a Copy According to the Paper Size

 

Specify the number of copies (max. 20 copies).

 

To make 1 to 9 copies or 20 copies

 

Display the desired number of copies on the LED. Each time you press the + button, the number on the LED increases by one.

 

When the LED displays as follows, the number of copies is set to "20". Press the + button again to return to "1".

 

To make 10 to 19 copies

 

Press the + button repeatedly until the LED displays as follows.

 

Load only the desired number of sheets to copy.

 

Note

 

Pressing the Stop/Reset button returns the number of copies to 1.

 

Press the Color button for color copying, or the Black button for black & white copying.

The machine starts copying.

 

While copying is in progress, the number on the LED flashes and decreases by one to indicate the remaining number of copies to be made.

 

Remove the original on the platen glass after copying is complete.

 

To make 10 to 19 copies

 

The paper-out error will occur when all of the loaded paper runs out. Press the Stop/Reset button to release the error.

 

Important

 

Do not open the document cover or remove the original from the platen glass until scanning is completed.

 

Note

 

To cancel copying, press the Stop/Reset button.

 

To set the print quality to "Fast" (speed priority)

 

You can set the print quality to "Fast" (speed priority) only when A4 or Letter-sized plain paper is selected for the page size and media type.

 

Press and hold down the Color or Black button for 2 or more seconds in step 6.

 

The LED flashes once.

 

Release the button.

 

The machine starts copying.

 

When the print quality is set to "Fast", print speed is given priority over quality. To give priority to quality, press the Color or Black button for less than 2 seconds to copy in the print quality "Standard".

 

Request for a repair service

 

Contact Techbuddiesonline.com for repair service options

 

CALL US +1-855-517-2433 (TOLL FREE)

more...
No comment yet.