Batch Infrared Decoding can speed up signal decoding for imported data sets or when changing decoding tolerances. Currently, AnalysIR supports over 40 Infrared Protocols, but you can analyse 99.99% of protocols with AnalysIR.
Having already replaced standalone cameras for many people, the smartphone also has the humble remote control in its sights. MightyRC is the latest in a line of products looking to reduce remote control clutter in the environment where they have multiplied the most over the years – the living room. It allows all appliances compatible with infrared remotes to be controlled via a single app on a smartphone or tablet.
The MightyRC system is made up of a box measuring 80 x 80 x 18 mm (3.1 x 3.1 x 0.7 in) and a companion smartphone app. Commands are entered in the app and transmitted to the box over Bluetooth 4.0, provided the smartphone is within 100 ft (30 m) range. The box then relays these commands to the various appliances using an infrared transmitter. The company claims the IR transmitter is good to a range of around 6 m (20 ft), and is so powerful that appliances won't necessarily need to be in the box's line of sight – although don't go expecting the infrared beams to travel through walls. The device also has an infrared receiver, which allows it to learn from existing remotes.
Naming each of your devices in the app will allow the MightyRC to differentiate between the them. Further to channeling the controls of these different appliances into the one interface, MightyRC also features a nifty "Activation" function. This feature allows users to program a one-touch control to activate preset functions across different devices. So you could, in theory, setup an activation called "King of Westeros" allowing you to switch on your television, switch the cable box to the correct channel, and turn on the surround sound system with just one click in time for the latest episode of Game of Thrones.
Oscilloscope infrared receiver - using a standard IR Led soldered to a BNC and plugged directly into a spare channel of the Oscilloscope as an IR receiver.
A while ago we came across a website on infrared remote controls which suggested a simple way to view IR signals using an Oscilloscope. The idea is to use a standard IR Led mounted into a BNC/RCA plug using a spare channel making an Oscilloscope infrared receiver. So we set about ordering the connectors, which arrived in the post today. Another way of looking at this device is as a ‘poor-mans’ IR receiver, but if you have an Oscilloscope to plug it into then maybe you are not so poor after all.
Since introducing support into AnalysIR for the USB IR Toy we haven’t played too much with setting the different infrared modulation frequencies. After reading some mixed experiences on the Dangerous Prototypes forum we decided to put it to the test. So to start off we implemented a feature in AnalysIR to set the modulation frequency and to default to 38kHz at start up.
Recently we have been helping several members on the Arduino forum to record and playback their remote control signals from their Air Conditioners.
..... These signals are typically much longer than those of TVs or common media devices. The 2 most popular libraries for Arduino, IRremote & IRlib are excellent, but have some limitations which we have covered in a previous post. In this post we address one particular issue that is proving challenging to users.
Decoding Airconditioner Infrared remote control using AnalysIR, Raspberry Pi & LIRC
We have been intending to add support for LIRC into AnalysIR for a long time. Recently one of our enthusiastic users, working on his Raspberry PI, needed some help getting Air conditioner signals from his ‘Air Conditioner’ infrared remote control decoded. His preference was for a LIRC based approach as he already had this working for his TV via his RPi using a cool web based interface from his smart phone.
After some initial teething problems we set about playing with this new device. Then we went about trying to integrate it into AnalysIR. We found that operating the IR Toy in 'Sampling Mode' worked best for our needs. There are several other modes available which are described on the website below.
As we have supported Arduino and of course Raspberry Pi we felt that adding a new device as a source for IR signals, warranted the introduction of a new Menu feature called Source. From our next release (hopefully) users will be able to select the source from the main menu and use Arduinos, RPi & now the IR toy with AnalysIR.
A common question asked on forums is one about "Driving an Infrared Led directly from an Arduino pin". Often there is a debate if a resistor is required...
Although the answer may be obvious to anyone with at least a basic knowledge of Ohm’s Law, many are confused about how to choose a resistor value for optimum performance. Often, there is a debate about whether a resistor is required at all, given that the AVR pins are rated to deliver an absolute maximum of 40mA on a pin. (Note: All of the quoted specs in the data sheet are for test conditions of up to 20mA on a pin). Of course there are better ways of drive an IR LED with a transistor circuit or even a constant current circuit. However, in this post we consider only the direct drive circuit, as illustrated in the diagram down below. Make sure to read the caveats at the end of this post.
We have been updating the AnalysIR documentation for the upcoming 1.0 release and realised that AnalysIR now decodes 40 Infrared protocols. Wow!. Along with the most common TV & media remotes controls there are 14 Air Conditioner protocols included. The full set of protocols is included with the latest ‘dev’ release, which is available to all current & new owners of AnalysIR (less the aforementioned documentation) in advance of the pending 1.0 release. The 1.0 release will incorporate over 170 new features, updates and fixes compared to the initial release and also supports our new IR Learner which will be launched along with a range of Infrared kits in the coming months.
Geeky gadgets Arduino Infrared Learning Processor Board Set (video) Geeky gadgets Developers, makers and hobbyists that enjoy making projects using the Arduino platform might be interested in a new Arduino compatible infrared learning processor...
Make your own infrared receiver with two resitors, an IR Led and Arduino
Our recent post about the silver bullet IR receiver proved very popular and we promised that we would follow-up with another variant of the poor maker’s Infrared receiver. This time we are using an IR Led (emitter), 2 resistors and any standard Arduino. You will also need to download the Arduino code provided below, compile and upload it. One of the most common problems encountered when trying to decode IR signals is that makers don’t always have the appropriate IR receiver for the job in hand or have to wait for one to be delivered by mail. Here we present an affordable method to allow you to use any IR emitter (LED) as a receiver and as a bonus we are publishing the Arduino code to make it all work.
A review of timing distortions in Infrared Receivers
Many electronics enthusiasts will be familiar with how Infrared receivers demodulate IR signals. In this post we show a visualisation of the time lag and distortion of the signals as they pass through the IR receiver for demodulation and noise filtering. Most DIY projects use the raw timings from the IR receiver to decode individual signals. However, not many will be aware that IR receivers can distort the signal timings by significant amounts. Fortunately, common IR decoders take this into account and compensate for timing distortions introduced by infrared demodulators / receivers.
Dublin, Ireland – 31st January 2014. We are happy to announce the latest ‘New Year’ release of AnalysIR to all our backers & supporters. Since the completion of the crowd-funding campaign on Indiegogo we have added over 125 updates and enhancements to AnalysIR, with more to come. A major highlight of this release is full …
A major highlight of this release is full AnalysIR support for USB IR Toy from Dangerous Prototypes (V1 & V2 hardware) for decoding and resending IR signals at all common modulation frequencies. In our opinion, AnalysIR is now the premier GUI supporting DP’s IR toy, not to mention the Arduino, RPi, MSP430 F5529 LaunchPad (beta) and more. A selection of enhancements in this latest release, include...................
I get many requests from people who are still looking for cheap, easy, and fun project ideas for their Raspberry Pi’s, so I wanted to share this translator project I’ve been working on. With very little effort, we can turn this 35$ mini-computer into a feature rich language translator that not only supports voice recognition and native speaker playback, but also is capable of dynamically translating between 1000′s of language pairs, FREE! Even if you are not interested in building this exact translational tool, there are still many parts of this tutorial that might be interesting to you (speech recognition, text to speech, Microsoft/Google translation APIs). Just like the rest of my posts, this one starts with our shopping list. Most of my readers will probably already have most of these items around the house:
Sharing your scoops to your social media accounts is a must to distribute your curated content. Not only will it drive traffic and leads through your content, but it will help show your expertise with your followers.
How to integrate my topics' content to my website?
Integrating your curated content to your website or blog will allow you to increase your website visitors’ engagement, boost SEO and acquire new visitors. By redirecting your social media traffic to your website, Scoop.it will also help you generate more qualified traffic and leads from your curation work.
Distributing your curated content through a newsletter is a great way to nurture and engage your email subscribers will developing your traffic and visibility.
Creating engaging newsletters with your curated content is really easy.